Added FD21 definition to config.mk

[goodfet] / firmware / config.mk

diff --git a/firmware/config.mk b/firmware/config.mk
index 86b6d5e..d50dc0c 100644 (file)
--- a/firmware/config.mk
+++ b/firmware/config.mk
@@ -2,15 +2,29 @@
 ## These are production boards.
 ##################################
 
-#Unset by default, but can be explicitly set later.
-config=undef
+#Unset by default, but can be explicitly overwritten.
+config ?= undef
+
+ifneq (,$(findstring $(board),apimote1 apimote))
+mcu ?= msp430f2618
+platform := apimote
+config := monitor spi ccspi
+MSP430BSL?=goodfet.bsl --speed=38400 --swap-reset-test
+CFLAGS += -Duseuart1 -Dapimote
+endif
+
+ifneq (,$(findstring $(board),goodthopter01 goodthopter10 goodthopter11))
+mcu ?= msp430f2274
+platform := goodfet
+config := monitor spi
+endif
 
 ifneq (,$(findstring $(board),goodfet20 goodfet10 goodfet11))
-mcu ?= msp430f1612
+mcu ?= msp430f1611
 platform := goodfet
 endif
 
-ifneq (,$(findstring $(board),goodfet21))
+ifneq (,$(findstring $(board),goodfet21,goodfet22))
 mcu ?= msp430f2618
 platform := goodfet
 endif
@@ -23,7 +37,7 @@ CONFIG_ccspi = n
 CONFIG_nrf = y
 endif
 
-ifneq (,$(findstring $(board),goodfet40 goodfet41))
+ifneq (,$(findstring $(board),goodfet40 goodfet41 goodfet42))
 mcu ?= msp430f2618
 platform := goodfet
 CONFIG_nrf = y
@@ -33,7 +47,13 @@ ifneq (,$(findstring $(board),stm32f4discovery))
 
 periph ?= /opt/STM32F4xx_StdPeriph_Driver
 discovery ?= /opt/STM32F4-Discovery_FW_V1.1.0
-pincs ?=  -I$(periph)/inc -I$(discovery)/Libraries/CMSIS/ST/STM32F4xx/Include -I$(discovery)/Libraries/CMSIS/Include -Dassert_param\(x\)
+
+usbcore ?= $(discovery)/Libraries/STM32_USB_Device_Library/Core
+usbsrc ?= $(usbcore)/src
+otginc ?= /opt/STM32F4-Discovery_FW_V1.1.0/Libraries/STM32_USB_OTG_Driver/inc
+otgsrc ?= /opt/STM32F4-Discovery_FW_V1.1.0/Libraries/STM32_USB_OTG_Driver/src
+
+pincs ?=  -I$(periph)/inc -I$(usbcore)/inc -I$(otginc) -I$(discovery)/Libraries/CMSIS/ST/STM32F4xx/Include  -I$(discovery)/Libraries/CMSIS/Include -Dassert_param\(x\)= -DUSE_USB_OTG_FS -I/opt/STM32F4-Discovery_FW_V1.1.0/Utilities/STM32F4-Discovery
 psrc ?=  /opt/STM32F4xx_StdPeriph_Driver/src
 
 
@@ -55,11 +75,14 @@ LDFLAGS =
 mcu ?= stm32f407
 platform := stm32f4discovery
 config = monitor
-extralibs = lib/cortexm3.o lib/system_stm32f4xx.o $(psrc)/stm32f4xx_rcc.o $(psrc)/stm32f4xx_gpio.o
+
+# This is a pain.
+#usblibs =  $(usbsrc)/usbd_core.o $(usbsrc)/usbd_req.o $(usbsrc)/usbd_ioreq.o $(usbsrc)/usbd_core.o $(otgsrc)/usb_dcd.o $(otgsrc)/usb_dcd_int.o $(otgsrc)/usb_hcd.o $(otgsrc)/usb_hcd_int.o $(otgsrc)/usb_otg.o
+extralibs = lib/cortexm3.o lib/system_stm32f4xx.o lib/stm32f4xx_rcc.o $(psrc)/stm32f4xx_gpio.o $(psrc)/stm32f4xx_usart.o $(usblibs) 
 
 endif
 
-ifneq (,$(findstring $(board),facedancer10))
+ifneq (,$(findstring $(board),facedancer10 facedancer11 facedancer20 facedancer21))
 mcu ?= msp430f2618
 platform := goodfet
 config = monitor spi maxusb
@@ -124,6 +147,17 @@ CFLAGS=$(DEBUG) -Iinclude -mmcu=$(mcu) -W -Os -mcall-prologues -Wall -Wextra -Wu
 config := monitor avr spi jscan
 endif
 
+ifneq (,$(findstring $(board),zigduino))
+GCC := avr-gcc
+CC := avr-gcc
+mcu ?= atmega128rfa1
+platform = zigduino
+CFLAGS=$(DEBUG) -Iinclude -mmcu=$(mcu) -W -Os -mcall-prologues -Wall -Wextra -Wuninitialized -fpack-struct -fshort-enums -funsigned-bitfields
+config := monitor atmel_radio #avr spi
+AVR_PLATFORM := m128rfa1
+endif
+
+
 ifneq (,$(findstring $(board),arduino))
 GCC := avr-gcc
 mcu ?= atmega168
@@ -135,7 +169,7 @@ endif
 ifneq (,$(findstring $(board),tilaunchpad))
 mcu ?=msp430f1612
 CFLAGS := -DDEBUG_LEVEL=3 -DDEBUG_START=1 -DINBAND_DEBUG
-CFLAGS+= -Werror -Wall
+CFLAGS+= -Wall
 config := monitor chipcon i2c
 endif
 
@@ -147,7 +181,7 @@ $(error Please define board, as explained in the README)
 endif
 #platform := $(board)
 
-AVAILABLE_APPS = monitor spi jtag sbw jtag430 jtag430x2 i2c jtagarm7 ejtag jtagxscale openocd chipcon avr pic adc nrf ccspi glitch smartcard ps2 slc2  maxusb
+AVAILABLE_APPS = monitor spi jtag sbw jtag430 jtag430x2 i2c jtagarm7 ejtag jtagxscale openocd chipcon avr pic adc nrf ccspi glitch smartcard ps2 slc2  maxusb atmel_radio
 
 # defaults
 CONFIG_monitor    ?= y
@@ -158,7 +192,7 @@ CONFIG_sbw        ?= n
 CONFIG_jtag430    ?= y
 CONFIG_jtag430x2  ?= y
 CONFIG_i2c        ?= n
-CONFIG_jtagarm7   ?= n
+CONFIG_jtagarm7   ?= y
 CONFIG_ejtag      ?= n
 CONFIG_jtagxscale ?= n
 CONFIG_openocd    ?= y
@@ -172,6 +206,7 @@ CONFIG_glitch     ?= n
 CONFIG_smartcard  ?= n
 CONFIG_ps2        ?= n
 CONFIG_slc2       ?= n
+CONFIG_atmel_radio ?=n
 
 #The CONFIG_foo vars are only interpreted if $(config) is "unset".
 ifeq ($(config),undef)