updated command line 802.15.4 checksum calculator and added serClose to GoodFET to...
[goodfet] / firmware / include / jtagarm7tdmi.h
index d8f5bf3..ae1d4fd 100644 (file)
 
 
 unsigned char current_chain;
-unsigned char last_halt_debug_state = -1;
-unsigned long last_halt_pc = -1;
-unsigned long count_dbgspd_instr_since_debug = 0;
-unsigned long count_sysspd_instr_since_debug = 0;
+unsigned char current_dbgstate = -1;
+//unsigned char last_halt_debug_state = -1;
+//unsigned long last_halt_pc = -1;
 
 
-void jtag_goto_shift_ir();
-void jtag_goto_shift_dr();
-void jtag_reset_to_runtest_idle();
-void jtag_arm_tcktock();
+//void jtag_goto_shift_ir();
+//void jtag_goto_shift_dr();
+//void jtag_reset_to_runtest_idle();
+//void jtag_arm_tcktock();
 
 
 // JTAGARM7TDMI Commands
@@ -48,7 +47,7 @@ unsigned long jtagarm7tdmi_writeflash(unsigned long adr, unsigned long data);
 
 
 //! Start JTAG
-unsigned long jtagarm7tdmi_start(void);
+void jtagarm7tdmi_start(void);
 //! Reset TAP State Machine
 void jtagarm7tdmi_resettap();
 
@@ -63,6 +62,10 @@ unsigned long jtagarm7tdmi_idcode();
 unsigned char jtagarm7tdmi_bypass();
 //!  Connect the appropriate scan chain to TDO/TDI
 unsigned long jtagarm7tdmi_scan_intest(int n);
+//!  Set a 32-bit ARM register
+void jtagarm7tdmi_set_register(unsigned long reg, unsigned long val);
+//!  Get a 32-bit ARM register
+unsigned long jtagarm7tdmi_get_register(unsigned long reg);
 
 // ARM7TDMI-specific pins
 // DBGRQ - GoodFET Pin 8
@@ -125,68 +128,42 @@ The least significant bit of the instruction register is scanned in and scanned
 #define EICE_WP1CTRLMASK                21
 
 
-#define NOEND 0
-#define END 1
-#define MSB 0
-#define LSB 1
-#define NORETIDLE 0
-#define RETIDLE 1
-
-
 //JTAGARM7TDMI commands
-#define JTAGARM7TDMI_GET_DEBUG_CTRL       0x80
-#define JTAGARM7TDMI_SET_DEBUG_CTRL       0x81
-#define JTAGARM7TDMI_GET_PC               0x82
-#define JTAGARM7TDMI_SET_PC               0x83
-#define JTAGARM7TDMI_GET_CHIP_ID          0x84
-#define JTAGARM7TDMI_GET_DEBUG_STATE      0x85
-#define JTAGARM7TDMI_GET_WATCHPOINT       0x86
-#define JTAGARM7TDMI_SET_WATCHPOINT       0x87
-#define JTAGARM7TDMI_GET_REGISTER         0x88
-#define JTAGARM7TDMI_SET_REGISTER         0x89
-#define JTAGARM7TDMI_GET_REGISTERS        0x8a
-#define JTAGARM7TDMI_SET_REGISTERS        0x8b
-#define JTAGARM7TDMI_HALTCPU              0x8c
-#define JTAGARM7TDMI_RELEASECPU           0x8d
-#define JTAGARM7TDMI_DEBUG_INSTR          0x8e
-#define JTAGARM7TDMI_STEP_INSTR           0x8f
-#define JTAGARM7TDMI_WRITEMEM             0x90
-#define JTAGARM7TDMI_READMEM              0x91
-#define JTAGARM7TDMI_WRITE_FLASH_PAGE     0x92
-#define JTAGARM7TDMI_READ_FLASH_PAGE      0x93
-#define JTAGARM7TDMI_MASS_ERASE_FLASH     0x94
-#define JTAGARM7TDMI_PROGRAM_FLASH        0x95
-#define JTAGARM7TDMI_LOCKCHIP             0x96
-#define JTAGARM7TDMI_CHIP_ERASE           0x97
+#define JTAGARM7_GET_REGISTER               0x87
+#define JTAGARM7_SET_REGISTER               0x88
+#define JTAGARM7_DEBUG_INSTR                0x89
 // Really ARM specific stuff
-#define JTAGARM7TDMI_GET_CPSR             0x98
-#define JTAGARM7TDMI_SET_CPSR             0x99
-#define JTAGARM7TDMI_GET_SPSR             0x9a
-#define JTAGARM7TDMI_SET_SPSR             0x9b
-#define JTAGARM7TDMI_SET_MODE_THUMB       0x9c
-#define JTAGARM7TDMI_SET_MODE_ARM         0x9d
+#define JTAGARM7_SET_IR                     0x90
+#define JTAGARM7_WAIT_DBG                   0x91
+#define JTAGARM7_SHIFT_DR                   0x92
+#define JTAGARM7_CHAIN0                     0x93
+#define JTAGARM7_SCANCHAIN1                 0x94
+#define JTAGARM7_EICE_READ                  0x95
+#define JTAGARM7_EICE_WRITE                 0x96
 
 
 // for deeper understanding, read the instruction cycle timing section of: 
 //      http://www.atmel.com/dyn/resources/prod_documents/DDI0029G_7TDMI_R3_trm.pdf
 #define EXECNOPARM                  0xe1a00000L
 #define ARM_INSTR_NOP               0xe1a00000L
-#define ARM_INSTR_STR_Rx_r14        0xe58e0000L
+#define ARM_INSTR_BX_R0             0xe12fff10L
+#define ARM_INSTR_STR_Rx_r14        0xe58f0000L // from atmel docs
 #define ARM_READ_REG                ARM_INSTR_STR_Rx_r14
-#define ARM_INSTR_LDR_Rx_r14        0xe59e0000L
+#define ARM_INSTR_LDR_Rx_r14        0xe59f0000L // from atmel docs
 #define ARM_WRITE_REG               ARM_INSTR_LDR_Rx_r14
 #define ARM_INSTR_LDR_R1_r0_4       0xe4901004L
 #define ARM_READ_MEM                ARM_INSTR_LDR_R1_r0_4
-#define ARM_INSTR_MRS_R0_CPSR       0xf10f0000L
+#define ARM_INSTR_STR_R1_r0_4       0xe4801004L
+#define ARM_WRITE_MEM               ARM_INSTR_STR_R1_r0_4
+#define ARM_INSTR_MRS_R0_CPSR       0xe10f0000L
 #define ARM_INSTR_MSR_cpsr_cxsf_R0  0xe12ff000L
 #define ARM_INSTR_STMIA_R14_r0_rx   0xE88E0000L      // add up to 65k to indicate which registers...
-#define ARM_STORE_MULTIPLE          ARM_INSTR_STMIA_R14_r0-rx
-#define ARM_INSTR_SKANKREGS1        0xE88E00ffL
-#define ARM_INSTR_SKANKREGS2        0xE88Eff00L
-#define ARM_INSTR_CLOBBEREGS        0xE89EffffL
+#define ARM_STORE_MULTIPLE          ARM_INSTR_STMIA_R14_r0_rx
+#define ARM_INSTR_SKANKREGS         0xE88F7fffL
+#define ARM_INSTR_CLOBBEREGS        0xE89F7fffL
 
-#define ARM_INSTR_B_PC              0xea000000L
-#define ARM_INSTR_BX_PC             0xe1200010L      // need to set r0 to the desired address
+#define ARM_INSTR_B_IMM             0xea000000L
+#define ARM_INSTR_BX_PC             0xe12fff10L      // need to set r0 to the desired address
 #define THUMB_INSTR_STR_R0_r0       0x60006000L
 #define THUMB_INSTR_MOV_R0_PC       0x46b846b8L
 #define THUMB_INSTR_BX_PC           0x47784778L