-/*! \file jtagxscale.h
+/*!
+ \file jtagxscale.h
\author Dave Huseby <huseby at linuxprogrammer.org>
- \brief Intel XScale JTAG command verbs
+ \brief Intel XScale JTAG
*/
+/* NOTE: I heavily cribbed from the ARM7TDMI jtag implementation. Credit where
+ * credit is due. */
+
+#ifndef JTAGXSCALE_H
+#define JTAGXSCALE_H
+
+#include "app.h"
+
+#define JTAGXSCALE 0x15
/*
- * TODO: specify the standard Intel XScale IR, TCB control and device specific
- * values.
+ * XScale 5-bit JTAG Commands
*/
+/* On the XScale chip, the TDI pin is connected to the MSB of the IR and the
+ * TDO is connected to the LSB. That means we have to shift these commands
+ * in from LSB to MSB order. */
+
+/* 01000 - High Z
+ * The highz instruction floats all three-stateable output and in/out pins.
+ * Also, when this instruction is active, the Bypass register is connected
+ * between TDI and TDO. This register can be accessed via the JTAG Test-Access
+ * Port throughout the device operation. Access to the Bypass register can also
+ * be obtained with the bypass instruction. */
+#define XSCALE_IR_HIGHZ 0x08
+
+/* 11110 - Get ID Code
+ * The idcode instruction is used in conjunction with the device identification
+ * register. It connects the identification register between TDI and TDO in the
+ * Shift_DR state. When selected, idcode parallel-loads the hard-wired
+ * identification code (32 bits) on TDO into the identification register on the
+ * rising edge of TCK in the Capture_DR state. Note: The device identification
+ * register is not altered by data being shifted in on TDI.*/
+#define XSCALE_IR_IDCODE 0x1E
+
+/* 11111 - Bypass
+ * The bypass instruction selects the Bypass register between TDI and TDO pins
+ * while in SHIFT_DR state, effectively bypassing the processor’s test logic.
+ * 02 is captured in the CAPTURE_DR state. While this instruction is in effect,
+ * all other test data registers have no effect on the operation of the system.
+ * Test data registers with both test and system functionality perform their
+ * system functions when this instruction is selected. */
+#define XSCALE_IR_BYPASS 0x1F
+
+/*
+ * GoodFET Commands from the Client
+ */
+/* commands start at 0xF0 */
+
+
+/*
+ * Public Interface
+ */
+
+/* this handles shifting arbitrary length bit strings into the instruction
+ * register and clocking out bits while leaving the JTAG state machine in a
+ * known state. it also handle bit swapping. */
+unsigned long jtag_xscale_shift_n(unsigned long word,
+ unsigned char nbits,
+ unsigned char flags);
+
+extern app_t const jtagxscale_app;
+
+#endif // JTAGXSCALE_H
+