A major refactor of the GoodFET firmware build system and apps to give better

[goodfet] / firmware / include / nrf.h

diff --git a/firmware/include/nrf.h b/firmware/include/nrf.h
index ea3bbb3..bf0f99d 100644 (file)
--- a/firmware/include/nrf.h
+++ b/firmware/include/nrf.h
@@ -3,17 +3,68 @@
   \brief Constants for NRF Driver
 */
 
-//Nordic RF Instructions
+#ifndef NRF_H
+#define NRF_H
+
+#include "app.h"
+
+#define NRF   0x50
+
+//Nordic RF Commands
+
+//Grab a packet, if one is available.
+#define NRF_RX 0x80
+//Send a packet.
+#define NRF_TX 0x81
+//Flush RX
+#define NRF_RX_FLUSH 0x82
+//Flush TX
+#define NRF_TX_FLUSH 0x83
+
+
+//Nordic RF SPI Instructions
 #define NRF_R_REGISTER   0x00
 #define NRF_W_REGISTER   0x20
-#define NRF_R_RX_PAYLOAD 0x60
+#define NRF_R_RX_PAYLOAD 0x61
 #define NRF_W_TX_PAYLOAD 0xA0
-#define NRF_FLUSH_TX     0xE0
-#define NRF_FLUSH_RX     0xE1
-#define NRF_REUSE_TX_PL  0xE2
+#define NRF_FLUSH_TX     0xE1
+#define NRF_FLUSH_RX     0xE2
+#define NRF_REUSE_TX_PL  0xE3
 #define NRF_NOP          0xFF
 
 
-
 //NRF24L01+ Registers
-//TODO add these
+//These aren't yet used, but are included for later
+//translation to XML.
+#define NRF_CONFIG      0x00
+#define NRF_EN_AA       0x01
+#define NRF_EN_RXADDR   0x02
+#define NRF_SETUP_AW    0x03
+#define NRF_SETUP_RETR  0x04
+#define NRF_RF_CH       0x05
+#define NRF_RF_SETUP    0x06
+#define NRF_STATUS      0x07
+#define NRF_OBSERVE_TX  0x08
+#define NRF_RPD         0x09
+#define NRF_RX_ADDR_P0  0x0A
+#define NRF_RX_ADDR_P1  0x0B
+#define NRF_RX_ADDR_P2  0x0C
+#define NRF_RX_ADDR_P3  0x0D
+#define NRF_RX_ADDR_P4  0x0E
+#define NRF_RX_ADDR_P5  0x0F
+#define NRF_TX_ADDR     0x10
+#define NRF_RX_PW_P0    0x11
+#define NRF_RX_PW_P1    0x12
+#define NRF_RX_PW_P2    0x13
+#define NRF_RX_PW_P3    0x14
+#define NRF_RX_PW_P4    0x15
+#define NRF_RX_PW_P5    0x16
+#define NRF_FIFO_STATUS 0x17
+#define NRF_DYNPD       0x1C
+//Also 32-byte buffers for ACK_PLD, TX_PLD, and RX_PLD.
+//Separate SPI commands.
+
+extern app_t const nrf_app;
+
+#endif // NRF_H
+