Preparing for an AVR port of at least the monitor.

[goodfet] / firmware / lib / atmega168.c

diff --git a/firmware/lib/atmega168.c b/firmware/lib/atmega168.c
new file mode 100644 (file)
index 0000000..36795fa
--- /dev/null
+++ b/firmware/lib/atmega168.c
@@ -0,0 +1,89 @@
+//! MSP430F1612/1611 clock and I/O definitions
+
+#include "platform.h"
+
+//! Receive a byte.
+unsigned char serial0_rx(){
+  return 0;
+}
+
+//! Receive a byte.
+unsigned char serial1_rx(){
+  return 0;
+}
+
+//! Transmit a byte.
+void serial0_tx(unsigned char x){
+}
+
+//! Transmit a byte on the second UART.
+void serial1_tx(unsigned char x){
+}
+
+//! Set the baud rate.
+void setbaud0(unsigned char rate){
+  
+  //http://mspgcc.sourceforge.net/baudrate.html
+  switch(rate){
+  case 1://9600 baud
+    
+    break;
+  case 2://19200 baud
+    
+    break;
+  case 3://38400 baud
+    
+    break;
+  case 4://57600 baud
+    
+    break;
+  default:
+  case 5://115200 baud
+    
+    break;
+  }
+}
+
+//! Set the baud rate of the second uart.
+void setbaud1(unsigned char rate){
+  //http://mspgcc.sourceforge.net/baudrate.html
+  switch(rate){
+  case 1://9600 baud
+    
+    break;
+  case 2://19200 baud
+    
+    break;
+  case 3://38400 baud
+    
+    break;
+  case 4://57600 baud
+    
+    break;
+  default:
+  case 5://115200 baud
+    
+    break;
+  }
+}
+
+
+void msp430_init_uart0(){
+}
+
+
+void msp430_init_uart1(){
+}
+
+
+
+//! Initialization is correct.
+void msp430_init_dco_done(){
+  //Nothing to do for the 1612.
+}
+
+
+void msp430_init_dco() {
+
+}
+