Arduino port is working, but only at 9600 baud.

[goodfet] / firmware / lib / command.c

diff --git a/firmware/lib/command.c b/firmware/lib/command.c
index d984fca..92c0b4c 100644 (file)
--- a/firmware/lib/command.c
+++ b/firmware/lib/command.c
@@ -1,6 +1,6 @@
 /*! \file command.c
   \author Travis Goodspeed
-  \brief These functions manage command interpretation.
+  \brief These functions manage command interpretation and timing.
 */
 
 #include "command.h"
@@ -30,13 +30,35 @@ void debugstr(const char *str){
   txstring(0xFF,0xFF,str);
 }
 
+//! brief Debug a hex word string.
+void debughex(u16 v) {
+  debugbytes((void *)&v, 2);
+}
+
+//! brief Debug a hex word string.
+void debughex32(u32 v) {
+  debugbytes((void *)&v, 4);
+}
+
+/*! \brief Transmit debug bytes.
+  
+  Transmits bytes for debugging.
+*/
+void debugbytes(const char *bytes, unsigned int len){
+  u16 i;
+  txhead(0xFF,0xFE,len);
+  for(i=0;i<len;i++)
+    serial_tx(bytes[i]);
+}
+
+
 //! Transmit a header.
 void txhead(unsigned char app,
            unsigned char verb,
            unsigned long len){
   serial_tx(app);
   serial_tx(verb);
-  //serial_tx(len);
+  //serial_tx(len); //old protocol
   txword(len);
 }
 
@@ -106,3 +128,73 @@ void msdelay(unsigned int ms){
   }
   //Using TimerA might be cleaner.
 }
+
+
+/* To better satisfy the somewhat odd timing requirements for
+   PIC33F/24H/24F ICSP programming, and for better control of GoodFET
+   timing more generally, here are a few delay routines that use Timer B.
+
+   Note that I wrote these referring only to the MSP430x2xx family
+   manual. Beware on MSP430x1xx chips. Further note that, assuming
+   some minor errors will be made, I try to err on the side of
+   delaying slightly longer than requested. */
+void prep_timer()
+{
+  #ifdef MSP430
+  BCSCTL2 = 0x00; /* In particular, use DCOCLK as SMCLK source with
+                    divider 1. Hence, Timer B ticks with system
+                    clock at 16 MHz. */
+
+  TBCTL = 0x0204; /* Driven by SMCLK; disable Timer B interrupts;
+                    reset timer in case it was previously in use */
+  #else
+  #warning "Function unimplemented for this platform."
+  #endif
+}
+
+//! Delay for specified number of milliseconds (given 16 MHz clock)
+void delay_ms( unsigned int ms )
+{
+  #ifdef MSP430
+  // 16000 ticks = 1 ms
+  TBCTL |= 0x20; // Start timer!
+  while (ms--) {
+    while (TBR < 16000)
+      asm( "nop" );
+    TBCTL = 0x0224;
+  }
+  TBCTL = 0x0204; // Reset Timer B, till next time
+  #else
+  debugstr("delay_ms unimplemented");
+  #endif
+}
+
+//! Delay for specified number of microseconds (given 16 MHz clock)
+void delay_us( unsigned int us )
+{
+  #ifdef MSP430
+  // 16 ticks = 1 us
+  TBCTL |= 0x20; // Start timer!
+  while (us--) {
+    while (TBR < 16)
+      asm( "nop" );
+    TBCTL = 0x0224;
+  }
+  TBCTL = 0x0204; // Reset Timer B, till next time
+  #else
+  debugstr("delay_us unimplemented");
+  #endif
+}
+
+//! Delay for specified number of clock ticks (16 MHz clock implies 62.5 ns per tick).
+void delay_ticks( unsigned int num_ticks )
+{
+  #ifdef MSP430
+  TBCTL |= 0x20; // Start timer
+  while (TBR < num_ticks)
+    asm( "nop" );
+  TBCTL = 0x0204; // Reset Timer B, till next time
+  #else
+  debugstr("delay_ticks unimplemented");
+  #endif
+}