//! Receive a byte.
unsigned char serial1_rx(){
//TODO
+ return 00;
}
-
//! Transmit a byte.
void serial_tx(unsigned char x){
- while ((IFG2 & UCA0TXIFG) == 0); //loop unti lbuffer is free
+ while ((IFG2 & UCA0TXIFG) == 0); //loop until buffer is free
+ UCA0TXBUF = x; /* send the character */
+ while(!(IFG2 & UCA0TXIFG));
+}
+//! Transmit a byte.
+void serial_tx_old(unsigned char x){
+ while ((IFG2 & UCA0TXIFG) == 0); //loop until buffer is free
UCA0TXBUF = x; /* send the character */
while(!(IFG2 & UCA0TXIFG));
}
//! Transmit a byte on the second UART.
void serial1_tx(unsigned char x){
+
}
//! Set the baud rate.
}
-//host.h says 0x2B for DCO=4.9MHZ
-//Divide by four for accuracy.
//19200
-#define BAUD0EN 0x41
-#define BAUD1EN 0x03
+#define BAUD0EN 0x1b
+#define BAUD1EN 0x00
void msp430_init_uart(){
- // Serial on P3.4, P3.5
+
+ // Serial on P3.4, P3.5
P3SEL |= BIT4 + BIT5;
P3DIR |= BIT4;
-
- //UCA0CTL1 |= UCSWRST; /* disable UART */
+
+ //UCA0CTL1 |= UCSWRST; /* disable UART */
UCA0CTL0 = 0x00;
- //UCA0CTL0 |= UCMSB ;
- UCA0CTL1 |= UCSSEL_2; // SMCLK
- UCA0BR0 = BAUD0EN; // 115200
+ //UCA0CTL0 |= UCMSB ;
+ UCA0CTL1 |= UCSSEL_2; // SMCLK
+ UCA0BR0 = BAUD0EN; // 115200
UCA0BR1 = BAUD1EN;
- UCA0MCTL = 0; // Modulation UCBRSx = 5
- UCA0CTL1 &= ~UCSWRST; // **Initialize USCI state machine**
-
-}
+ UCA0MCTL = 0; // Modulation UCBRSx = 5
+ UCA0CTL1 &= ~UCSWRST; // **Initialize USCI state machine**
+
+ //Leave this commented!
+ //Interrupt is handled by target code, not by bootloader.
+ //IE2 |= UCA0RXIE;
+}
+
+//external resistor
+#define DCOR 1
void msp430_init_dco() {
BCSCTL1 = CALBC1_16MHZ;
- DCOCTL = CALDCO_16MHZ;
-
+ DCOCTL = CALDCO_16MHZ;
return;
}