one-line change to make all GPIOs usable on the 80-pin 261x packages

[goodfet] / firmware / lib / msp430x2618.c

diff --git a/firmware/lib/msp430x2618.c b/firmware/lib/msp430x2618.c
index ed437d7..6d49366 100644 (file)
--- a/firmware/lib/msp430x2618.c
+++ b/firmware/lib/msp430x2618.c
@@ -126,8 +126,21 @@ void msp430_init_uart(){
   //IE2 |= UCA0RXIE;
 }
 
+/* Info Flash Values
+CALDCO_16MHZ 0xdc CALBC1_16MHZ 0x8e   2274-000.txt
+CALDCO_16MHZ 0x74 CALBC1_16MHZ 0x8f   2618-000.txt
+CALDCO_16MHZ 0x6c CALBC1_16MHZ 0x8f   2618-001.txt
+CALDCO_16MHZ 0x97 CALBC1_16MHZ 0x8f   2618-002.txt
+CALDCO_16MHZ 0x6c CALBC1_16MHZ 0x8f   2618-003.txt
+CALDCO_16MHZ 0x95 CALBC1_16MHZ 0x8f   2618-004.txt
+CALDCO_16MHZ 0xcc CALBC1_16MHZ 0x8e   2618-005.txt
+CALDCO_16MHZ 0x87 CALBC1_16MHZ 0x8f   2618-006.txt
+CALDCO_16MHZ 0x96 CALBC1_16MHZ 0x8f   2619-001.txt
+*/
+
 //! Initialize the MSP430 clock.
 void msp430_init_dco() {
+    P8SEL = 0; // disable XT2 on P8.7/8
   if(CALBC1_16MHZ!=0xFF){
     //Info is intact, use it.
     BCSCTL1 = CALBC1_16MHZ;