Network order for telosb.

[goodfet] / firmware / platforms / telosb.h

diff --git a/firmware/platforms/telosb.h b/firmware/platforms/telosb.h
index 129b852..98b94bc 100644 (file)
--- a/firmware/platforms/telosb.h
+++ b/firmware/platforms/telosb.h
@@ -8,9 +8,72 @@
 
 */
 
+#ifdef MSP430
+#include <io.h>
+#endif
 
-//LED on P1.0
+//LED on P5.4
 #define PLEDOUT P5OUT
 #define PLEDDIR P5DIR
 #define PLEDPIN BIT4
 
+
+#define SPIOUT P3OUT
+#define SPIDIR P3DIR
+#define SPIIN  P3IN
+#define SPIREN P3REN
+
+
+/* For the radio to be used:
+   4.6 (!RST) must be low
+   4.5 (VREF_EN) must be high
+   4.2 (!CS) must be low for the transaction.
+*/
+
+#define INITPLATFORM \
+  P1DIR = 0xe0;\
+  P1OUT = 0x00;\
+  P2DIR = 0x7b;\
+  P2OUT = 0x10;\
+  P3DIR = 0xf1;\
+  P3OUT = 0x00;\
+  P4DIR = 0xfd;\
+  P4OUT = 0xFd;\
+  P5DIR = 0xff;\
+  P5OUT = 0xff;\
+  P6DIR = 0xff;\
+  P6OUT = 0x00;
+
+//Radio CS is P4.2
+#define SETSS P4OUT|=BIT2
+#define CLRSS P4OUT&=~BIT2
+#define DIRSS P4DIR|=BIT2
+
+
+//Flash CS is P4.4, redefine only for the SPI app.
+#ifdef SPIAPPLICATION
+#undef SETSS
+#undef CLRSS
+#undef DIRSS
+#define SETSS P4OUT|=BIT4
+#define CLRSS P4OUT&=~BIT4
+#define DIRSS P4DIR|=BIT4
+#endif
+
+//CC2420 Chip Enable
+#define SETCE P4OUT|=BIT6
+#define CLRCE P4OUT&=~BIT6
+#define DIRCE P4DIR|=BIT6
+
+
+// network byte order converters
+#define htons(x) ((((uint16_t)(x) & 0xFF00) >> 8) | \
+                                (((uint16_t)(x) & 0x00FF) << 8))
+#define htonl(x) ((((uint32_t)(x) & 0xFF000000) >> 24) | \
+                                 (((uint32_t)(x) & 0x00FF0000) >> 8) | \
+                                 (((uint32_t)(x) & 0x0000FF00) << 8) | \
+                                 (((uint32_t)(x) & 0x000000FF) << 24))
+
+#define ntohs htons
+#define ntohl htonl
+