- MDMCFG4 = 0x86; // Modem configuration.
- MDMCFG3 = 0x83; // Modem configuration.
- MDMCFG2 = 0x30; // Modem configuration.
- MDMCFG1 = 0x22; // Modem configuration.
- MDMCFG0 = 0xF8; // Modem configuration.
-
- /*
- CHANNR = 0x00; // Channel number.
- DEVIATN = 0x00; // Modem deviation setting (when FSK modulation is enabled).
- FREND1 = 0x56; // Front end RX configuration.
- FREND0 = 0x10; // Front end RX configuration.
- MCSM0 = 0x14; // Main Radio Control State Machine configuration.
- FOCCFG = 0x16; // Frequency Offset Compensation Configuration.
- BSCFG = 0x6C; // Bit synchronization Configuration.
- AGCCTRL2 = 0x03; // AGC control.
- AGCCTRL1 = 0x40; // AGC control.
- AGCCTRL0 = 0x91; // AGC control.
- FSCAL3 = 0xE9; // Frequency synthesizer calibration.
- FSCAL2 = 0x2a; // Frequency synthesizer calibration.
- FSCAL1 = 0x00; // Frequency synthesizer calibration.
- FSCAL0 = 0x1f; // Frequency synthesizer calibration
-
- TEST2 = 0x88; // Various test settings.
- TEST1 = 0x31; // Various test settings.
- TEST0 = 0x09; // Various test settings.
-
- //FE is too high
- PA_TABLE0 = 0xFF; // PA output power setting.
- PKTCTRL1 = 0x04; // Packet automation control.
- PKTCTRL0 = 0x22; // Packet automation control.
- ADDR = 0x00; // Device address.
- PKTLEN = 0xFF; // Packet length.
- */