X-Git-Url: http://git.rot13.org/?p=goodfet;a=blobdiff_plain;f=client%2FGoodFETCC.py;h=1d5a7b76c67a29d1906fbcdedddec484900187db;hp=3937c62b1a7c35e515e871d03cbc1c4c98e0b3c4;hb=a8b686459e73c8a37df4537083a675fc21de4699;hpb=363ca47c79cf3a39dca93a54fe48e0253c946c8b

diff --git a/client/GoodFETCC.py b/client/GoodFETCC.py
index 3937c62..1d5a7b7 100644
--- a/client/GoodFETCC.py
+++ b/client/GoodFETCC.py
@@ -38,8 +38,13 @@ class GoodFETCC(GoodFET):
             self.SRF_loadsymbols();
             self.haveloadedsymbols=True;
         except:
-            print "SmartRF not found for this chip.";
+            ident=self.CCident();
+            if ident==0x0000 or ident==0xFFFF:
+                print "Chip ID is 0x%04x, implying a wiring problem." % ident;
+            else:
+                print "SmartRF not found for chip 0x%04x." % ident;
     def SRF_chipdom(self,chip="cc1110", doc="register_definition.xml"):
+    #def SRF_chipdom(self,chip="cc1110", doc="workingconfig.xml"):
         """Loads the chip XML definitions from SmartRF7."""
         fn="%s/config/xml/%s/%s" % (self.smartrfpath,chip,doc);
         #print "Opening %s" % fn;
@@ -411,9 +416,15 @@ class GoodFETCC(GoodFET):
         self.pokebysym("SYNC0",0xB0);
         self.pokebysym("ADDR", 0xB0);
         return;
-    def config_ook(self,band="none"):
-        self.pokebysym("FSCTRL1"  , 0x0C) #08   # Frequency synthesizer control.
-        self.pokebysym("FSCTRL0"  , 0x00)   # Frequency synthesizer control.
+
+    def config_ademco(self, band="lf"):
+        pass
+        # FIXME Temporary placeholder for me to write the Ademco protocol into the GoodFET Chipcon Application
+        # TODO  Also, write a class that takes in the XML registration files and sets values (not just addresses)
+
+	def config_ook(self,band="none"):
+		self.pokebysym("FSCTRL1"  , 0x0C) #08   # Frequency synthesizer control.
+		self.pokebysym("FSCTRL0"  , 0x00)   # Frequency synthesizer control.
         
         #Don't change these while the radio is active.
         self.pokebysym("FSCAL3"   , 0xEA)   # Frequency synthesizer calibration.
@@ -701,7 +712,7 @@ class GoodFETCC(GoodFET):
         if(ident1!=ident2 or ident2!=ident3):
             print "Error, repeated ident attempts unequal."
             print "%04x, %04x, %04x" % (ident1, ident2, ident3);
-        
+
         #Single step, printing PC.
         print "Tracing execution at startup."
         for i in range(1,15):
@@ -747,16 +758,16 @@ class GoodFETCC(GoodFET):
         self.CClockchip();
     
 
-    CCversions={0x0100:"CC1110",
-                0x1100:"CC1111",
-                0x8500:"CC2430",
-                0x8900:"CC2431",
-                0x8100:"CC2510",
-                0x9100:"CC2511",
-                0xA500:"CC2530", #page 57 of SWRU191B
-                0xB500:"CC2531",
-                0x9500:"CC2533",
-                0x8D00:"CC2540",
+    CCversions={0x0100:"cc1110",
+                0x1100:"cc1111",
+                0x8500:"cc2430",
+                0x8900:"cc2431",
+                0x8100:"cc2510",
+                0x9100:"cc2511",
+                0xA500:"cc2530", #page 57 of SWRU191B
+                0xB500:"cc2531",
+                0x9500:"cc2533",
+                0x8D00:"cc2540",
                 0xFF00:"CCmissing"};
     execbuf=None;
     CCexecbuf= {0x0100:0xF000,