X-Git-Url: http://git.rot13.org/?p=goodfet;a=blobdiff_plain;f=client%2FGoodFETCC.py;h=69ef8b9bad81a93fb410c3c68c50565f9f1b8a4b;hp=969ba334ef97cb54cf038de0ced3abd53a143097;hb=d27d75e4cedfab56742717f3ac990be059f8e168;hpb=94fe2500d21c2c329f8a70f654e6fac0faf5730b

diff --git a/client/GoodFETCC.py b/client/GoodFETCC.py
index 969ba33..69ef8b9 100644
--- a/client/GoodFETCC.py
+++ b/client/GoodFETCC.py
@@ -47,13 +47,18 @@ class GoodFETCC(GoodFET):
             if(pc!=self.CCgetPC()):
                 print "ERROR: PC changed during CCdebuginstr([NOP])!";
         
+        print "Checking pokes to XRAM."
+        for i in range(0xf000,0xf020):
+            self.CCpokedatabyte(i,0xde);
+            if(self.CCpeekdatabyte(i)!=0xde):
+                print "Error in XDATA at 0x%04x" % i;
         
         #print "Status: %s." % self.CCstatusstr();
         #Exit debugger
-        self.CCstop();
+        self.stop();
         print "Done.";
 
-    def CCsetup(self):
+    def setup(self):
         """Move the FET into the CC2430/CC2530 application."""
         #print "Initializing Chipcon.";
         self.writecmd(0x30,0x10,0,self.data);
@@ -64,13 +69,28 @@ class GoodFETCC(GoodFET):
     def CCwr_config(self,config):
         """Write the config register of a Chipcon."""
         self.writecmd(0x30,0x81,1,[config&0xFF]);
+    def CClockchip(self):
+        """Set the flash lock bit in info mem."""
+        self.writecmd(0x30, 0x9A, 0, None);
     
+
     CCversions={0x0100:"CC1110",
                 0x8500:"CC2430",
                 0x8900:"CC2431",
                 0x8100:"CC2510",
                 0x9100:"CC2511",
+                0xA500:"CC2530", #page 52 of SWRU191
+                0xB500:"CC2531",
                 0xFF00:"CCmissing"};
+    CCpagesizes={0x01: 1024, #"CC1110",
+                0x85: 2048, #"CC2430",
+                0x89: 2048, #"CC2431",
+                0x81: 1024, #"CC2510",
+                0x91: 1024, #"CC2511",
+                0xA5: 2048, #"CC2530", #page 52 of SWRU191
+                0xB5: 2048, #"CC2531",
+                0xFF: 0    } #"CCmissing"};
+
     def CCidentstr(self):
         ident=self.CCident();
         chip=self.CCversions.get(ident&0xFF00);
@@ -81,12 +101,23 @@ class GoodFETCC(GoodFET):
         chip=ord(self.data[0]);
         rev=ord(self.data[1]);
         return (chip<<8)+rev;
+    def CCpagesize(self):
+        """Get a chipcon's ID."""
+        self.writecmd(0x30,0x8B,0,None);
+        chip=ord(self.data[0]);
+        
+        return self.CCpagesizes.get(chip);
     def CCgetPC(self):
         """Get a chipcon's PC."""
         self.writecmd(0x30,0x83,0,None);
         hi=ord(self.data[0]);
         lo=ord(self.data[1]);
         return (hi<<8)+lo;
+    def CCcmd(self,phrase):
+        self.writecmd(0x30,0x00,len(phrase),phrase);
+        val=ord(self.data[0]);
+        print "Got %02x" % val;
+        return val;
     def CCdebuginstr(self,instr):
         self.writecmd(0x30,0x88,len(instr),instr);
         return ord(self.data[0]);
@@ -100,6 +131,24 @@ class GoodFETCC(GoodFET):
         self.data=[adr&0xff, (adr&0xff00)>>8];
         self.writecmd(0x30,0x91, 2, self.data);
         return ord(self.data[0]);
+    def CCpeekirambyte(self,adr):
+        """Read the contents of IRAM at an address."""
+        self.data=[adr&0xff];
+        self.writecmd(0x30,0x02, 1, self.data);
+        return ord(self.data[0]);
+    def CCpeekiramword(self,adr):
+        """Read the little-endian contents of IRAM at an address."""
+        return self.CCpeekirambyte(adr)+(
+            self.CCpeekirambyte(adr+1)<<8);
+    def CCpokeiramword(self,adr,val):
+        self.CCpokeirambyte(adr,val&0xff);
+        self.CCpokeirambyte(adr+1,(val>>8)&0xff);
+    def CCpokeirambyte(self,adr,val):
+        """Write the contents of IRAM at an address."""
+        self.data=[adr&0xff, val&0xff];
+        self.writecmd(0x30,0x02, 2, self.data);
+        return ord(self.data[0]);
+    
     def CCpokedatabyte(self,adr,val):
         """Write a byte to data memory."""
         self.data=[adr&0xff, (adr&0xff00)>>8, val];
@@ -112,14 +161,23 @@ class GoodFETCC(GoodFET):
         """Check the status."""
         self.writecmd(0x30,0x84,0,None);
         return ord(self.data[0])
-    CCstatusbits={0x80 : "erased",
+    #Same as CC2530
+    CCstatusbits={0x80 : "erase_busy",
                   0x40 : "pcon_idle",
                   0x20 : "cpu_halted",
                   0x10 : "pm0",
                   0x08 : "halt_status",
                   0x04 : "locked",
                   0x02 : "oscstable",
-                  0x01 : "overflow"};
+                  0x01 : "overflow"
+                  };
+    CCconfigbits={0x20 : "soft_power_mode",   #new for CC2530
+                  0x08 : "timers_off",
+                  0x04 : "dma_pause",
+                  0x02 : "timer_suspend",
+                  0x01 : "sel_flash_info_page" #stricken from CC2530
+                  };
+                  
     def CCstatusstr(self):
         """Check the status as a string."""
         status=self.CCstatus();
@@ -130,7 +188,7 @@ class GoodFETCC(GoodFET):
                 str="%s %s" %(self.CCstatusbits[i],str);
             i*=2;
         return str;
-    def CCstart(self):
+    def start(self):
         """Start debugging."""
         self.writecmd(0x30,0x20,0,self.data);
         ident=self.CCidentstr();
@@ -140,14 +198,20 @@ class GoodFETCC(GoodFET):
         self.CChaltcpu();
         #print "Status: %s." % self.CCstatusstr();
         
-    def CCstop(self):
+    def stop(self):
         """Stop debugging."""
         self.writecmd(0x30,0x21,0,self.data);
     def CCstep_instr(self):
         """Step one instruction."""
         self.writecmd(0x30,0x89,0,self.data);
+    def CCeraseflashbuffer(self):
+        """Erase the 2kB flash buffer"""
+        self.writecmd(0x30,0x99);
     def CCflashpage(self,adr):
-        """Flash a page of flash from 0xF000 in XDATA"""
-        data=[0x00,0x00,0x00,0x00];
+        """Flash 2kB a page of flash from 0xF000 in XDATA"""
+        data=[adr&0xFF,
+              (adr>>8)&0xFF,
+              (adr>>16)&0xFF,
+              (adr>>24)&0xFF];
+        print "Flashing buffer to 0x%06x" % adr;
         self.writecmd(0x30,0x95,4,data);
-