X-Git-Url: http://git.rot13.org/?p=goodfet;a=blobdiff_plain;f=client%2FGoodFETCCSPI.py;h=8a216b3fe57d23ba1a4a65890d7a43be3a809735;hp=612ce3e685ca2f4bb2f9c0ae2946db9114179e06;hb=671771f8909b6821de8aef5b90f9390ffb648988;hpb=73a31780aab1bea70e6e201dad4c752a3e253536 diff --git a/client/GoodFETCCSPI.py b/client/GoodFETCCSPI.py index 612ce3e..8a216b3 100644 --- a/client/GoodFETCCSPI.py +++ b/client/GoodFETCCSPI.py @@ -19,10 +19,12 @@ class GoodFETCCSPI(GoodFET): #Set up the radio for ZigBee self.strobe(0x01); #SXOSCON + self.strobe(0x02); #SCAL self.poke(0x11, 0x0AC2); #MDMCTRL0 self.poke(0x12, 0x0500); #MDMCTRL1 self.poke(0x1C, 0x007F); #IOCFG0 self.poke(0x19, 0x01C4); #SECCTRL0, disabling crypto + self.RF_setsync(); def ident(self): return self.peek(0x1E); #MANFIDL @@ -82,7 +84,7 @@ class GoodFETCCSPI(GoodFET): """Write a CCSPI Register.""" data=[reg,(val>>8)&0xFF,val&0xFF]; self.writecmd(self.CCSPIAPP,0x03,len(data),data); - if self.peek(reg,bytes)!=val: + if self.peek(reg,bytes)!=val and reg!=0x18: print "Warning, failed to set r%02x=0x%04x, got %02x." %( reg, val, @@ -91,8 +93,22 @@ class GoodFETCCSPI(GoodFET): def status(self): """Read the status byte.""" + statusbits={0x80: "?", + 0x40: "XOSC16M_STABLE", + 0x20: "TX_UNDERFLOW", + 0x10: "ENC_BUSY", + 0x08: "TX_ACTIVE", + 0x04: "LOCK", + 0x02: "RSSI_VALID", + 0x01: "?"}; status=self.strobe(0x00); - print "Status=%02x" % status; + i=1; + str=""; + while i<0x100: + if status&i: + str="%s %s" % (statusbits[i],str); + i*=2; + return str; #Radio stuff begins here. def RF_setenc(self,code="802.15.4"): @@ -105,17 +121,31 @@ class GoodFETCCSPI(GoodFET): return 0; def RF_setrate(self,rate=0): return 0; + def RF_getsync(self): + return self.peek(0x14); + def RF_setsync(self,sync=0xa70F): + """Set the SYNC preamble. + Use 0xA70F for 0xA7.""" + self.poke(0x14,sync); + return; + def RF_setfreq(self,frequency): """Set the frequency in Hz.""" mhz=frequency/1000000; - fsctrl=self.peek(0x18)&~0x3FF; + fsctrl=0x8000; #self.peek(0x18)&(~0x3FF); fsctrl=fsctrl+int(mhz-2048) self.poke(0x18,fsctrl); + self.strobe(0x02); def RF_getfreq(self): """Get the frequency in Hz.""" fsctrl=self.peek(0x18); mhz=2048+(fsctrl&0x3ff) return mhz*1000000; + def RF_setchan(self,channel): + if channel < 11 or channel > 26: + print "Only 802.15.4 channels 11 to 26 are currently supported."; + else: + self.RF_setfreq( ( (channel-11)*5 + 2405 ) * 1000000 ); def RF_getsmac(self): """Return the source MAC address.""" return 0xdeadbeef; @@ -140,9 +170,6 @@ class GoodFETCCSPI(GoodFET): contents. """ - # TODO -- Flush only if there's an overflow. - #self.strobe(0x08); #SFLUSHRX - data="\0"; self.data=data; self.writecmd(self.CCSPIAPP,0x80,len(data),data); @@ -152,40 +179,91 @@ class GoodFETCCSPI(GoodFET): if(len(buffer)==0): return None; return buffer; - def RF_rxpacket_old(self): - """Get a packet from the radio. Returns None if none is waiting. In - order to not require the SFD, FIFO, or FIFOP lines, this - implementation works by comparing the buffer to the older - contents. - """ - self.strobe(0x03); #SRXON - self.strobe(0x08); #SFLUSHRX - - buffer=range(0,0xff); - buffer[0]=0x3F | 0x40; #RXFIFO - buffer=self.trans(buffer); - - new=False; - for foo in range(0,ord(buffer[0])): - if buffer[foo]!=self.lastpacket[foo]: - new=True; - if not new: - return None; - - - self.lastpacket=buffer; - return buffer; + def RF_txpacket(self,packet): + """Send a packet through the radio.""" + self.writecmd(self.CCSPIAPP,0x81,len(packet),packet); + #time.sleep(1); + #self.strobe(0x09); + return; + + + def RF_modulated_spectrum(self): + """Hold a carrier wave on the present frequency.""" + # print "Don't know how to hold a carrier."; + # 33.1 p.55: + # reset chip + # SXOSCON + # set MDMCTRL1.TX_MODE to 3 0x12 3:2 + # STXON 0x04 + + mdmctrl1=self.peek(0x12); + #print "mdmctrl1 was %04x" % mdmctrl1; + mdmctrl1=mdmctrl1|0x00c0; #MDMCTRL1.TX_MODE = 3 + self.poke(0x12, mdmctrl1); #MDMCTRL1 + + mdmctrl1=self.peek(0x12); + #print "mdmctrl1 is %04x" % mdmctrl1; + + # http://e2e.ti.com/support/low_power_rf/f/155/t/15914.aspx?PageIndex=2 + # suggests this + self.strobe(0x02); #STXCAL + #print "STXCAL status: %s" % self.status() + + # is this necessary? + self.strobe(0x09); #SFLUSHTX + #print "SFLUSHTX status: %s" % self.status() + + self.strobe(0x04); #STXON + #print "STXON status: %s" % self.status() + def RF_carrier(self): """Hold a carrier wave on the present frequency.""" - print "Don't know how to hold a carrier."; + # print "Don't know how to hold a carrier."; + # 33.1 p.54: + # reset chip + # SXOSCON + # set MDMCTRL1.TX_MODE to 2 or 3 0x12 3:2 + # set DACTST to 0x1800 0x2E + # STXON 0x04 + + mdmctrl1=self.peek(0x12); + #print "mdmctrl1 was %04x" % mdmctrl1; + mdmctrl1=mdmctrl1|0x0080; + mdmctrl1=mdmctrl1&0x0080; #MDMCTRL1.TX_MODE = 2 + self.poke(0x12, mdmctrl1); #MDMCTRL1 + + mdmctrl1=self.peek(0x12); + #print "mdmctrl1 is %04x" % mdmctrl1; + + self.poke(0x2E, 0x1800); #DACTST + dactst=self.peek(0x2E); + #print "dactst is %04x" % dactst; + + # see above for why this is here + self.strobe(0x02); #STXCAL + #print "STXCAL status: %s" % self.status() + self.strobe(0x09); #SFLUSHTX + #print "SFLUSHTX status: %s" % self.status() + + self.strobe(0x04); #STXON + #print "STXON status: %s" % self.status() + def RF_promiscuity(self,promiscuous=1): mdmctrl0=self.peek(0x11); - print "mdmctrl0 was %04x" % mdmctrl0; - mdmctrl0=mdmctrl0&(~0x800); - print "mdmctrl0 is now %04x" % mdmctrl0; + if promiscuous>0: + mdmctrl0=mdmctrl0&(~0x800); + else: + mdmctrl0=mdmctrl0|0x800; + self.poke(0x11,mdmctrl0); + return; + def RF_autocrc(self,autocrc=1): + mdmctrl0=self.peek(0x11); + if autocrc==0: + mdmctrl0=mdmctrl0&(~0x0020); + else: + mdmctrl0=mdmctrl0|0x0020; self.poke(0x11,mdmctrl0); return; - packetlen=16; def RF_setpacketlen(self,len=16): """Set the number of bytes in the expected payload.""" @@ -210,3 +288,23 @@ class GoodFETCCSPI(GoodFET): choice=choices[len]; self.poke(0x03,choice); self.maclen=len; + def printpacket(self,packet): + s=""; + i=0; + for foo in packet: + s="%s %02x" % (s,ord(foo)); + print "#%s" % s; + + def printdissect(self,packet): + try: + from scapy.all import Dot15d4 + except ImportError: + print "To use packet disection, Scapy must be installed and have the Dot15d4 extension present." + print "try: hg clone http://hg.secdev.org/scapy-com"; + print " sudo ./setup.py install"; + self.printpacket(packet); + try: + scapyd = Dot15d4(packet[1:]); + scapyd.show(); + except: + pass;