X-Git-Url: http://git.rot13.org/?p=goodfet;a=blobdiff_plain;f=client%2FGoodFETMCPCAN.py;h=7182d3706d7e9cf80a5a8d0f296aa78649aeb871;hp=1b8a5fdc24d9ed4f1d67d83146c03fd16d77fc8f;hb=f7fdc48f01ada713d5034763a2f3395fe2a7c51b;hpb=906e2500df02bdb4b0471a5011e713177e959b49

diff --git a/client/GoodFETMCPCAN.py b/client/GoodFETMCPCAN.py
index 1b8a5fd..7182d37 100644
--- a/client/GoodFETMCPCAN.py
+++ b/client/GoodFETMCPCAN.py
@@ -28,6 +28,20 @@ class GoodFETMCPCAN(GoodFETSPI):
         # mode.
         self.MCPreqstatConfiguration();
         
+        # If we don't enable promiscous mode, we'll miss a lot of
+        # packets.  It can be manually disabled later.
+        #self.poke8(0x60,0xFF); #TODO Does this have any unpleasant side effects?
+        self.poke8(0x60,0x66); #Wanted FF, but some bits are reserved.
+        
+        #Set the default rate.
+        self.MCPsetrate();
+    
+    #Array of supported rates.
+    MCPrates=[83.3, 100, 125,
+              250, 500, 1000];
+    
+    def MCPsetrate(self,rate=125):
+        """Sets the data rate in kHz."""
         # Now we need to set the timing registers.  See chapter 5 of
         # the MCP2515 datasheet to get some clue as to how this
         # arithmetic of this works, as my comments here will likely be
@@ -48,19 +62,66 @@ class GoodFETMCPCAN(GoodFETSPI):
         
         # CNF1 with a prescaler of 4 and a SJW of 1 TQ.  SJW of 4
         # might be more stable.
-        self.poke8(0x2a,0x04);
+        #self.poke8(0x2a,0x04);
         
         # CNF2 with a BLTMODE of 1, SAM of 0, PS1 of 7TQ, and PRSEG of 2TQ
-        self.poke8(0x29,
-                   0x80   |  # BTLMODE=1
-                   (6<<3) |  # 6+1=7TQ for PHSEG1
-                   (1)       # 1+1=2TQ for PRSEG
-                   );
+        #self.poke8(0x29,
+        #           0x80   |  # BTLMODE=1
+        #           (6<<3) |  # 6+1=7TQ for PHSEG1
+        #           (1)       # 1+1=2TQ for PRSEG
+        #           );
         
         #CNF3 with a PS2 length of 6TQ.
-        self.poke8(0x28,
-                   5      #5+1=6TQ
-                   );
+        #self.poke8(0x28,
+        #           5      #5+1=6TQ
+        #           );
+        
+        
+        print "Setting rate of %i kHz." % rate;
+        
+        #These are the new examples.
+        if rate==125:
+            #125 kHz, 16 TQ, not quite as worked out above.
+            CNF1=0x04;
+            CNF2=0xB8;
+            CNF3=0x05;
+        elif rate==100:
+            #100 kHz, 20 TQ
+            CNF1=0x04;
+            CNF2=0xBA;
+            CNF3=0x07;
+        elif rate>83 and rate<83.5:
+            #83+1/3 kHz, 8 TQ
+            # 0.04% error from 83.30
+            CNF1=0x0E;
+            CNF2=0x90;
+            CNF3=0x02;
+        elif rate==250:
+            #256 kHz, 20 TQ
+            CNF1=0x01;
+            CNF2=0xBA;
+            CNF3=0x07;
+        elif rate==500:
+            #500 kHz, 20 TQ
+            CNF1=0x00;
+            CNF2=0xBA;
+            CNF3=0x07;
+        elif rate==1000:
+            #1,000 kHz, 10 TQ
+            CNF1=0x00;
+            CNF2=0xA0;
+            CNF3=0x02;
+            print "WARNING: Because of chip errata, this probably won't work."
+        else:
+            print "Given unsupported rate of %i kHz." % rate;
+            print "Defaulting to 125kHz.";
+            CNF1=0x04;
+            CNF2=0xB8;
+            CNF3=0x05;
+        self.poke8(0x2a,CNF1);
+        self.poke8(0x29,CNF2);
+        self.poke8(0x28,CNF3);
+        
     def MCPreset(self):
         """Reset the MCP2515 chip."""
         self.SPItrans([0xC0]);
@@ -164,4 +225,8 @@ class GoodFETMCPCAN(GoodFETSPI):
     def poke8(self,adr,val):
         """Poke a value into RAM.  Untested"""
         self.SPItrans([0x02,adr&0xFF,val&0xFF]);
+        newval=self.peek8(adr);
+        if newval!=val:
+            print "Failed to poke %02x to %02x.  Got %02x." % (adr,val,newval);
+            print "Are you not in idle mode?";
         return val;