X-Git-Url: http://git.rot13.org/?p=goodfet;a=blobdiff_plain;f=client%2Fgoodfet.nrf;h=4abf8a4d29da04f37642104d39c8d5afbfcbcd6e;hp=9f748fb1aa24d219433ee5576a9d00f1e3d563f3;hb=9a2b743b2105ca84080b2bcb355130e423809cd3;hpb=a950a1978237d14158e29547ca966e5f46365751

diff --git a/client/goodfet.nrf b/client/goodfet.nrf
index 9f748fb..4abf8a4 100755
--- a/client/goodfet.nrf
+++ b/client/goodfet.nrf
@@ -35,7 +35,7 @@ def printconfig():
     print "Freq    %10i MHz" % (client.RF_getfreq()/10**6);
     print "Rate    %10i kbps" % (client.RF_getrate()/1000);
     print "PacketLen %02i bytes" % client.RF_getpacketlen();
-    print "MacLen    %2i bytes" % client.RF_getmaclen();
+    #print "MacLen    %2i bytes" % client.RF_getmaclen();
     print "SMAC  0x%010x" % client.RF_getsmac();
     print "TMAC  0x%010x" % client.RF_gettmac();
 
@@ -45,8 +45,14 @@ if(len(sys.argv)==1):
     print "%s info" % sys.argv[0];
     print "%s test" % sys.argv[0];
     print "%s regs" % sys.argv[0];
+    print "%s pyregs" % sys.argv[0];
+
     print "%s sniff\n\tSniffs packets by current config." % sys.argv[0];
     print "%s sniffob\n\tSniffs OpenBeacon traffic." % sys.argv[0];
+    print "%s snifftp\n\tSniffs Tunrning Point Clicker traffic." % sys.argv[0];
+
+    print "%s hosttp\n\tHosts Tunrning Point Clicker traffic." % sys.argv[0];
+
     print "%s carrier [freq]\n\tHolds a carrier on [freq] Hz." % sys.argv[0];
     sys.exit();
 
@@ -131,12 +137,13 @@ if(sys.argv[1]=="sniffob"):
     client.poke(0x00,0x00); #Stop nRF
     client.poke(0x01,0x00); #Disable Shockburst
     client.poke(0x02,0x01); #Set RX Pipe 0
-    client.RF_setmaclen(5); # SETUP_AW for 5-byte addresses.
+    
     client.RF_setfreq(2481 * 10**6);
     client.poke(0x06,0x09); #2MBps, -18dBm in RF_SETUP
     client.poke(0x07,0x78); #Reset status register
     
     #OpenBeacon defines these in little endian as follows.
+    client.RF_setmaclen(5); # SETUP_AW for 5-byte addresses.
     #0x01, 0x02, 0x03, 0x02, 0x01
     client.RF_setsmac(0x0102030201);
     #'O', 'C', 'A', 'E', 'B'
@@ -145,13 +152,39 @@ if(sys.argv[1]=="sniffob"):
     #Set packet length of 16.
     client.RF_setpacketlen(16);
     
-    #Power radio, prime for RX, checksum.
-    client.poke(0x00,0x70|0x03|0x08);
+    #Power radio, prime for RX, one-byte checksum.
+    client.poke(0x00,0x70|0x03|0x08); #0x08 for one byte, 0x04 for two.
     
     print "Listening as %010x on %i MHz" % (client.RF_getsmac(),
                                            client.RF_getfreq()/10**6);
     #Now we're ready to get packets.
+    while 1:
+        packet=None;
+        while packet==None:
+            #time.sleep(0.1);
+            packet=client.RF_rxpacket();
+        printpacket(packet);
+        sys.stdout.flush();
+
+if(sys.argv[1]=="snifftp"):
+    client.poke(0x00,0x00); #Stop nRF
+    client.poke(0x01,0x00); #Disable Shockburst
+    client.poke(0x02,0x01); #Set RX Pipe 0
     
+    client.RF_setfreq((2400+0x29) * 10**6);
+    client.poke(0x06,0x00); #1Mbps
+    client.poke(0x07,0x78); #Reset status register
+    
+    client.RF_setmaclen(3); # SETUP_AW for 3-byte addresses.
+    client.RF_setsmac(0x123456);
+    client.RF_setpacketlen(4);
+    
+    #Power radio, prime for RX, two-byte checksum.
+    client.poke(0x00,0x70|0x03|0x04|0x08);
+    
+    print "Listening as %010x on %i MHz" % (client.RF_getsmac(),
+                                           client.RF_getfreq()/10**6);
+    #Now we're ready to get packets.
     while 1:
         packet=None;
         while packet==None:
@@ -160,6 +193,38 @@ if(sys.argv[1]=="sniffob"):
         printpacket(packet);
         sys.stdout.flush();
 
+if(sys.argv[1]=="hosttp"):
+    client.poke(0x00,0x00); #Stop nRF
+    client.poke(0x01,0x00); #Disable Shockburst
+    client.poke(0x02,0x01); #Set RX Pipe 0
+    
+    chan=0x29;
+
+    client.RF_setfreq((2400+chan) * 10**6);
+    client.poke(0x06,0x00); #1Mbps
+    client.poke(0x07,0x78); #Reset status register
+    
+    client.RF_setmaclen(3); # SETUP_AW for 3-byte addresses.
+    client.RF_setsmac(0x123456);
+    client.RF_setpacketlen(4);
+    
+    #Power radio, prime for RX, two-byte checksum.
+    client.poke(0x00,0x70|0x03|0x04|0x08);
+    
+    print "Listening as %010x on %i MHz" % (client.RF_getsmac(),
+                                           client.RF_getfreq()/10**6);
+    #Now we're ready to get packets.
+    while 1:
+        packet=None;
+        while packet==None:
+            packet=client.RF_rxpacket();
+        mac=((ord(packet[0])<<16)+
+             (ord(packet[1])<<8)+
+             ord(packet[2]));
+        key=packet[3];
+        print "%c from %06x" % (key,mac);
+        sys.stdout.flush();
+
 if(sys.argv[1]=="sniff"):
     #client.poke(0x00,0x00); #Stop nRF
     client.poke(0x07,0x78); #Reset status register
@@ -178,3 +243,27 @@ if(sys.argv[1]=="sniff"):
             packet=client.RF_rxpacket();
         printpacket(packet);
         sys.stdout.flush();
+if(sys.argv[1]=="explore"):
+    #client.poke(0x00,0x00); #Stop nRF
+    client.poke(0x07,0x78); #Reset status register
+    
+    #Power radio, prime for RX, no checksum.
+    client.poke(0x00,0x70|0x03);
+    
+    #Set packet length of 32.
+    #Without checksums, extra data will mix in.
+    client.RF_setpacketlen(32);
+    client.RF_setmaclen(3); # shortest address length
+    
+    #Now we're ready to get packets.
+    for smac in [0x0102030201, 0]:
+        client.RF_setsmac(smac);
+        for chan in range(0,0x80):
+            client.RF_setfreq((2400+chan) * 10**6);
+            time.sleep(1);
+            packet=client.RF_rxpacket();
+            if packet!=None:
+                print "Listening as %010x on %i MHz" % (client.RF_getsmac(),
+                                                        client.RF_getfreq()/10**6);
+                printpacket(packet);
+                sys.stdout.flush();