X-Git-Url: http://git.rot13.org/?p=goodfet;a=blobdiff_plain;f=client%2Fgoodfet.spiflash;h=21a1efbe61e1aac117d6de1ddf22042fce98079a;hp=10750ffa40997aab0ba1903ff0fdf6931c2b9ee2;hb=b3eb2f3f6021e8066fa33dd74bbde591f888d57e;hpb=4ad169e89a063394cbc38963eba6fdd0b52ceba4

diff --git a/client/goodfet.spiflash b/client/goodfet.spiflash
index 10750ff..21a1efb 100755
--- a/client/goodfet.spiflash
+++ b/client/goodfet.spiflash
@@ -10,22 +10,22 @@ import sys;
 import binascii;
 import array;
 
-from GoodFET import GoodFET;
+from GoodFETSPI import GoodFETSPIFlash;
 from intelhex import IntelHex;
 
 if(len(sys.argv)==1):
     print "Usage: %s verb [objects]\n" % sys.argv[0];
     print "%s info" % sys.argv[0];
-    print "%s dump $foo.hex [0x$start 0x$stop]" % sys.argv[0];
+    print "%s dump $foo.rom [0x$start 0x$stop]" % sys.argv[0];
     print "%s erase" % sys.argv[0];
-    print "%s write $foo.hex [0x$start 0x$stop]" % sys.argv[0];
-    print "%s verify $foo.hex [0x$start 0x$stop]" % sys.argv[0];
+    print "%s flash $foo.rom [0x$start 0x$stop]" % sys.argv[0];
+    print "%s verify $foo.rom [0x$start 0x$stop]" % sys.argv[0];
     print "%s peek 0x$start [0x$stop]" % sys.argv[0];
     print "%s poke 0x$adr 0x$val" % sys.argv[0];
     sys.exit();
 
-#Initailize FET and set baud rate
-client=GoodFET();
+#Initialize FET and set baud rate
+client=GoodFETSPIFlash();
 client.serInit()
 
 
@@ -53,19 +53,33 @@ if(sys.argv[1]=="test"):
         print "Some success, some failures.  Is a wire loose?";
     else:
         print "All reads succeeded.  Wiring is probably good.";
-
+    print "Erasing.";
+    client.SPIchiperase();
+    print "Testing erase.";
+    data=client.SPIpeekblock(0);
+    for i in data:
+        if ord(i)!=0xFF:
+            print "ERROR not properly erased!";
+    data=range(0,10);
+    client.SPIpokebytes(0,data);
+    print "Testing flash write.";
+    for i in data:
+        if(client.SPIpeek(i)!=i):
+            print "%06x not properly poked to %02x" % (i,i);
+    print "Test complete.";
 if(sys.argv[1]=="info"):
     data=client.SPIjedec();
-    print "Ident as %s\nManufacturer: %02x %s\nType: %02x\nCapacity: %02x" % (
+    print "Ident as %s\nManufacturer: %02x %s\nType: %02x\nCapacity: %02x (%i bytes)" % (
         client.SPIjedecstr(),
         ord(data[1]),client.SPIjedecmanstr(),
         ord(data[2]),
-        ord(data[3]));
+        ord(data[3]),
+        client.JEDECsize);
 
 if(sys.argv[1]=="dump"):
     f = sys.argv[2];
     start=0x0000;
-    stop=0x100000; #TODO, adjust this by the JEDEC size parameter.
+    stop=client.JEDECsize;
     if(len(sys.argv)>3):
         start=int(sys.argv[3],16);
     if(len(sys.argv)>4):
@@ -73,20 +87,53 @@ if(sys.argv[1]=="dump"):
     
     print "Dumping code from %06x to %06x as %s." % (start,stop,f);
     file = open(f, mode='wb')
+    
+    i=start;
+    while i<=stop:
+        data=client.SPIpeekblock(i);
+        #if(i%0x1000==0):
+        print "Dumped %06x."%i;
+        for j in data:
+            if i<stop: file.write(j);
+            i+=1;
+    file.close()
 
+if(sys.argv[1]=="verify"):
+    f = sys.argv[2];
+    start=0x0000;
+    stop=client.JEDECsize;
+    if(len(sys.argv)>3):
+        start=int(sys.argv[3],16);
+    if(len(sys.argv)>4):
+        stop=int(sys.argv[4],16);
+    
+    print "Verifying code from %06x to %06x as %s." % (start,stop,f);
+    file = open(f, mode='rb')
+    
     i=start;
+    bytes=0;
     while i<=stop:
         data=client.SPIpeekblock(i);
-        if(i%0x1000==0):
-            print "Dumped %06x."%i;
+        print "Verified %06x." % i;
         for j in data:
-            file.write(j);
+            if i<stop:
+                #bits|=ord(file.read(1))^ord(j);
+                a=ord(file.read(1));
+                b=ord(j);
+                if a!=b:
+                    print "%06x: %02x/%02x" % (i,a,b);
+                    bytes+=1;
             i+=1;
+        if bytes!=0:
+            print "%i bytes don't match." % bytes
+
     file.close()
+
 if(sys.argv[1]=="flash"):
     f = sys.argv[2];
     start=0x0000;
-    stop=0x100000; #TODO, adjust this by the JEDEC size parameter.
+    stop=client.JEDECsize;
+    
     if(len(sys.argv)>3):
         start=int(sys.argv[3],16);
     if(len(sys.argv)>4):
@@ -97,18 +144,19 @@ if(sys.argv[1]=="flash"):
 
     i=start;
     chars=list(file.read());
-    chunksize=0x80;
+    chunksize=0x100;
     
     while i<=stop:
         bytes=range(0,chunksize);
         for j in range(0,chunksize):
             bytes[j]=ord(chars[i+j]);
-        #client.SPIpokebyte(i,ord(chars[i]));
         client.SPIpokebytes(i,bytes);
         
         i+=chunksize;
-        if(i%0x100==0):
+        if(i%0x1000==0):
             print "Flashed %06x."%i;
+    
+    
     file.close()