X-Git-Url: http://git.rot13.org/?p=goodfet;a=blobdiff_plain;f=firmware%2FMakefile;h=0f7a6fc7e5fab8eda13df9da582df8193c7a2866;hp=fd0fdbfdc252739e0e4d4ae1ca092afd5b527baa;hb=9e1e82efa1ef0c0596623c38153ce9f4087a948f;hpb=984c06c6028f27ef87d7b9453c8c61045b8d26dd

diff --git a/firmware/Makefile b/firmware/Makefile
index fd0fdbf..0f7a6fc 100644
--- a/firmware/Makefile
+++ b/firmware/Makefile
@@ -1,6 +1,6 @@
 
 #include `uname`.mak
-#GOODFET?=/dev/ttyUSB0
+GOODFET?=/dev/ttyUSB0
 
 #For tos-bsl, use --invert-reset --invert-test
 BSL?=goodfet.bsl --speed=38400
@@ -8,14 +8,16 @@ BSL?=goodfet.bsl --speed=38400
 #One of these should be defined explicitly.
 #Default removed because of confusion.
 
-#mcu=msp430x2274
-#mcu=msp430x2618
+#mcu?=msp430x2274
+#mcu?=msp430x2618
 #mcu?=msp430x1612
 mcu?=RUNCONFIG
 
 #platform=goodfet
 #platform=telosb
 #platform=z1
+#platform=nhbadge
+#platform=nhbadgeb
 platform?=goodfet
 
 #N.B., gcc WILL NOT BITCH if this file doesn't exist.
@@ -23,7 +25,7 @@ platform?=goodfet
 GCCINC=-T ldscripts/$(mcu).x
 
 CCEXTRA?=
-CC=msp430-gcc -Wall -Os -g -mmcu=$(mcu) -D$(mcu) -D$(platform) -Dplatform=$(platform) -DGCC $(GCCINC) -I include -I platforms $(CCEXTRA)
+CC=msp430-gcc -Wall -Os -fno-strict-aliasing -g -mmcu=$(mcu) -D$(mcu) -D$(platform) -Dplatform=$(platform) -DGCC $(GCCINC) -I include -I platforms $(CCEXTRA)
 
 # Available Applications
 # ======================
@@ -48,6 +50,7 @@ CC=msp430-gcc -Wall -Os -g -mmcu=$(mcu) -D$(mcu) -D$(platform) -Dplatform=$(plat
 # jtagarm7 -- ARM7TDMI JTAG
 # ejtag -- MIPS JTAG
 # jtagxscale -- XScale JTAG
+# openocd -- OpenOCD bitbang device
 
 #  Microcontrollers:
 # chipcon -- Chipcon radio 8051 debugging
@@ -87,12 +90,14 @@ CC=msp430-gcc -Wall -Os -g -mmcu=$(mcu) -D$(mcu) -D$(platform) -Dplatform=$(plat
 # XScale PXA255 JTAG
 # config = monitor jtagxscale
 
+# OpenOCD bit-bang device
+#config = monitor openocd
+
 # Old Default Config
-#config = monitor sbw  chipcon nrf ccspi spi jtagarm7 jtag430 jtag430x2 avr
+# config = monitor sbw  chipcon nrf ccspi spi jtagarm7 jtag430 jtag430x2 avr
 
 # New default.
-config = monitor chipcon nrf spi jtagarm7 jtag430 jtag430x2 avr
-
+config ?= monitor chipcon ccspi nrf spi jtagarm7 jtag430 jtag430x2 avr openocd
 
 # Build the needed list of app and lib object files from the config
 apps= 
@@ -216,6 +221,17 @@ ifeq ($(filter jtagxscale, $(config)), jtagxscale)
 	hdrs+= jtagxscale.h
 endif
 
+# include openocd app
+ifeq ($(filter openocd, $(config)), openocd)
+	# add in base jtag code if not already
+	ifneq ($(filter apps/jtag/jtag.o, $(apps)), apps/jtag/jtag.o)
+		apps+= apps/jtag/jtag.o
+		hdrs+= jtag.h
+	endif
+	apps+= apps/jtag/openocd.o
+	hdrs+= openocd.h
+endif
+
 # include chipcon app
 ifeq ($(filter chipcon, $(config)), chipcon)
 	apps+= apps/chipcon/chipcon.o
@@ -228,8 +244,6 @@ ifeq ($(filter avr, $(config)), avr)
 	hdrs+= avr.h
 endif
 
-
-
 # include pic app
 ifeq ($(filter pic, $(config)), pic)
 	apps+= apps/pic/pic.o
@@ -309,7 +323,7 @@ verify:
 dumpinfo:
 	$(BSL) --dumpinfo
 $(app).c: config builddate appsfiles err
-$(app): $(app).c $(libs) $(apps)
+$(app): $(libs) $(apps)
 $(app).hex: $(app)
 	msp430-objcopy goodfet -O ihex goodfet.hex
 m4s: $(app).hex