X-Git-Url: http://git.rot13.org/?p=goodfet;a=blobdiff_plain;f=firmware%2FMakefile;h=1cf9b6c5ea54aef16d4d041149189c4ee941c5e5;hp=e4b021facffff91572eb22091a2bf7c0c7b36a8b;hb=092aa3fd5225a9daa84bc1359b8b9d772d795784;hpb=6dc88d2f1713d2bf9f2fabb5fbfb9f235a679b2f

diff --git a/firmware/Makefile b/firmware/Makefile
index e4b021f..1cf9b6c 100644
--- a/firmware/Makefile
+++ b/firmware/Makefile
@@ -1,56 +1,349 @@
 
 #include `uname`.mak
-GOODFET?=/dev/ttyUSB0
-
+GOODFET?=/dev/tty.usbser*
 
+#For Arduino,
+#BSL?=avrdude -V -F -c stk500v1 -p m328p -b 57600 -P /dev/tty.usbserial-* -U flash:w:blink.hex
 #For tos-bsl, use --invert-reset --invert-test
-BSL=goodfet.bsl -c $(GOODFET) --speed=38400
+MSP430BSL?=goodfet.bsl --speed=38400
+
+#One of these should be defined explicitly.
+#Default removed because of confusion.
 
-#mcu=msp430x2274
-#mcu=msp430x2618
-mcu?=msp430x1612
+#mcu?=msp430x2274
+#mcu?=msp430x2618
+#mcu?=msp430x1612
+#mcu?=atmega168
+mcu?=RUNCONFIG
 
+#platform?=goodfet
+#platform?=telosb
+#platform?=z1
+#platform?=nhbadge
+#platform?=nhbadgeb
+#platofrm?=arduino
+platform?=goodfet
 
 #N.B., gcc WILL NOT BITCH if this file doesn't exist.
-#GCCINC=-T ldscripts/161x.x
-GCCINC=-T ldscripts/$(mcu).x
+GCCINC?=-T ldscripts/$(mcu).x
+
+#GCC?=avr-gcc
+GCC?=msp430-gcc
+
+CCEXTRA?=  -D$(mcu) -D$(platform) -Dplatform=$(platform) -DGCC $(GCCINC) -I include -I platforms
+CC=$(GCC) -Wall -Os -fno-strict-aliasing -g -mmcu=$(mcu)  $(CCEXTRA)
+
+# Available Applications
+# ======================
+# Below is a list of available applications and their descriptions.
+
+# PRODUCTION: 
+# None have made it to production grade quality
+
+# BETA:
+# monitor -- Basic monitor
+# spi -- Turns GF into USB-to-SPI adapter
+# jtag -- Low level JTAG (needed by all other JTAG code)
+# sbw -- Makes JTAG Spy-by-wire multiplexable
+
+# ALPHA:
+# jtag430 -- 16-bit MSP430 JTAG
+# jtag430x2 -- 20-bit MSP430 JTAG
+
+# PRE-ALPHA:
+#  Bus protocols:
+# i2c -- Turns GF into USB-to-i2c adapter
+# jtagarm7 -- ARM7TDMI JTAG
+# ejtag -- MIPS JTAG
+# jtagxscale -- XScale JTAG
+# openocd -- OpenOCD bitbang device
+
+#  Microcontrollers:
+# chipcon -- Chipcon radio 8051 debugging
+# avr -- AVR debugger
+# pic -- PIC24H/dsPIC33F debugger
+# adc -- ADC10 (still specific to x2274, GoodFET32)
+
+#  Radios:
+# nrf -- Nordic RF SPI
+# ccspi -- Chipcon SPI
+
+# Miscelaneous:
+# glitch -- Glitch research tool
+# smartcard -- Smartcard IO
+# ps2 -- PS2 spy
+
+
+# Configurations
+# ==============
+# This is what you need to customize to specify which apps you want in your
+# firmware.  The "config" variable is just a space-delimited list of apps you
+# want included.  The makefile will take the list of apps and include all of
+# the proper code needed to build your desired firmware.
+
+# bare minimum
+# config = monitor
+
+# basic JTAG adapter
+# config = monitor jtag
+
+# Chipcon hacking
+# config = monitor chipcon ccspi
+
+# Glitch research
+# config = monitor glitch
+
+# XScale PXA255 JTAG
+# config = monitor jtagxscale
+
+# OpenOCD bit-bang device
+#config = monitor openocd
+
+# Old Default Config
+# config = monitor sbw  chipcon nrf ccspi spi jtagarm7 jtag430 jtag430x2 avr
+
+# New default.
+config ?= monitor chipcon spi jtag430 jtag430x2 avr openocd ccspi
 
-CCEXTRA?=
-CC=msp430-gcc -Wall -Os -g -mmcu=$(mcu) -DGCC $(GCCINC) -I include $(CCEXTRA)
+# Build the needed list of app and lib object files from the config
+apps= 
+libs= lib/$(mcu).o lib/command.o lib/dco_calib.o lib/apps.o lib/msp430.o lib/arduino.o
+hdrs=
+ERR=
 
-#Define extra modules here.
-moreapps?=
+# include monitor app
+ifeq ($(filter monitor, $(config)), monitor)
+	apps+= apps/monitor/monitor.o
+	hdrs+= monitor.h
+endif
+
+# include spi app
+ifeq ($(filter spi, $(config)), spi)
+	apps+= apps/spi/spi.o
+	hdrs+= spi.h
+endif
+
+# include base jtag if they specified it explicitly
+ifeq ($(filter jtag, $(config)), jtag)
+	ifneq ($(filter apps/jtag/jtag.o, $(apps)), apps/jtag/jtag.o)
+		apps+= apps/jtag/jtag.o
+		hdrs+= jtag.h
+	endif
+endif
+
+# include the sbw defs if they specified it
+ifeq ($(filter sbw, $(config)), sbw)
+	# if they only specify sbw, include jtag
+	ifneq ($(filter apps/jtag/jtag.o, $(apps)), apps/jtag/jtag.o)
+		apps+= apps/jtag/jtag.o
+		hdrs+= jtag.h
+	endif
+	apps+= apps/jtag/sbw.o
+	hdrs+= sbw.h
+endif
+
+# include jtag430 app
+ifeq ($(filter jtag430, $(config)), jtag430)
+	# add in base jtag code if not already
+	ifneq ($(filter apps/jtag/jtag.o, $(apps)), apps/jtag/jtag.o)
+		apps+= apps/jtag/jtag.o
+		hdrs+= jtag.h
+	endif
+	# add in the jtag430asm code if needed
+	ifneq ($(filter apps/jtag/jtag430asm.o, $(libs)), apps/jtag/jtag430asm.o)
+		apps+= apps/jtag/jtag430asm.o
+	endif
+	apps+= apps/jtag/jtag430.o
+	hdrs+= jtag430.h
+endif
+
+# include jtag430x2 app
+ifeq ($(filter jtag430x2, $(config)), jtag430x2)
+	# add in base jtag code if not already
+	ifneq ($(filter apps/jtag/jtag.o, $(apps)), apps/jtag/jtag.o)
+		apps+= apps/jtag/jtag.o
+		hdrs+= jtag.h
+	endif
+	# add in the jtag430asm code if needed
+	ifneq ($(filter jtag430asm.o, $(libs)), jtag430asm.o)
+		libs+= apps/jtag/jtag430asm.o
+	endif
+	#add in the jtag430 app if not already
+	ifneq ($(filter apps/jtag/jtag430.o, $(apps)), apps/jtag/jtag430.0)
+		apps+= apps/jtag/jtag430.o
+		hdrs+= jtag430.h
+	endif
+	apps+= apps/jtag/jtag430x2.o
+	hdrs+= jtag430x2.h
+endif
+
+# include i2c app
+ifeq ($(filter i2c, $(config)), i2c)
+	apps+= apps/i2c/i2c.o
+	hdrs+= i2c.h
+endif
+
+# include jtagarm7 app
+ifeq ($(filter jtagarm7, $(config)), jtagarm7)
+	# add in base jtag code if not already
+	ifneq ($(filter apps/jtag/jtag.o, $(apps)), apps/jtag/jtag.o)
+		apps+= apps/jtag/jtag.o
+		hdrs+= jtag.h
+	endif
+	apps+= apps/jtag/jtagarm7.o
+	hdrs+= jtagarm7.h
+endif
+
+# include jtagarm7tdmi app
+#ifeq ($(filter jtagarm7tdmi, $(config)), jtagarm7tdmi)
+	# add in base jtag code if not already
+	#ifneq ($(filter apps/jtag/jtag.o, $(apps)), apps/jtag/jtag.o)
+		#apps+= apps/jtag/jtag.o
+		#hdrs+= jtag.h
+	#endif
+	#apps+= apps/jtag/jtagarm7tdmi.o
+	#hdrs+= jtagarm7tdmi.h
+#endif
+
+# include ejtag app
+ifeq ($(filter ejtag, $(config)), ejtag)
+	# add in base jtag code if not already
+	ifneq ($(filter apps/jtag/jtag.o, $(apps)), apps/jtag/jtag.o)
+		apps+= apps/jtag/jtag.o
+		hdrs+= jtag.h
+	endif
+	apps+= apps/jtag/ejtag.o
+	hdrs+= ejtag.h
+endif
+
+# include jtagxscale app
+ifeq ($(filter jtagxscale, $(config)), jtagxscale)
+	# add in base jtag code if not already
+	ifneq ($(filter apps/jtag/jtag.o, $(apps)), apps/jtag/jtag.o)
+		apps+= apps/jtag/jtag.o
+		hdrs+= jtag.h
+	endif
+	apps+= apps/jtag/jtagxscale.o
+	hdrs+= jtagxscale.h
+endif
+
+# include openocd app
+ifeq ($(filter openocd, $(config)), openocd)
+	# add in base jtag code if not already
+	ifneq ($(filter apps/jtag/jtag.o, $(apps)), apps/jtag/jtag.o)
+		apps+= apps/jtag/jtag.o
+		hdrs+= jtag.h
+	endif
+	apps+= apps/jtag/openocd.o
+	hdrs+= openocd.h
+endif
+
+# include chipcon app
+ifeq ($(filter chipcon, $(config)), chipcon)
+	apps+= apps/chipcon/chipcon.o
+	hdrs+= chipcon.h
+endif
+
+# include avr app
+ifeq ($(filter avr, $(config)), avr)
+	apps+= apps/avr/avr.o
+	hdrs+= avr.h
+endif
+
+# include pic app
+ifeq ($(filter pic, $(config)), pic)
+	apps+= apps/pic/pic.o
+	hdrs+= pic.h
+endif
+
+# include adc app
+ifeq ($(filter adc, $(config)), adc)
+	ifeq ($(mcu), msp430x2274)
+		apps+= apps/adc/adc.o
+		hdrs+= adc.h
+	else
+		ERR= $(error The ADC app only works on GoodFET boards with the msp430x2274 processor)
+	endif
+endif
+
+# include chipcon radio spi app
+ifeq ($(filter ccspi, $(config)), ccspi)
+	apps+= apps/radios/ccspi.o
+	hdrs+= ccspi.h
+endif
+
+# include nrf app
+ifeq ($(filter nrf, $(config)), nrf)
+	apps+= apps/radios/nrf.o
+	hdrs+= nrf.h
+endif
+
+# include glitch app
+ifeq ($(filter glitch, $(config)), glitch)
+	apps+= apps/glitch/glitch.o
+	hdrs+= glitch.h
+endif
+
+# include smartcard app
+ifeq ($(filter smartcard, $(config)), smartcard)
+	apps+= apps/smartcard/smartcard.o
+	hdrs+= smartcard.h
+endif
+
+# include ps2 app
+ifeq ($(filter ps2, $(config)), ps2)
+	apps+= apps/plugins/ps2.o
+	hdrs+= ps2.h
+endif
+
+# Rules
 
-apps= $(moreapps) apps/monitor/monitor.o apps/spi/spi.o apps/i2c/i2c.o apps/chipcon/chipcon.o apps/jtag/jtag.o apps/jtag/jtag430.o apps/jtag/jtag430x2.o apps/avr/avr.o
-libs= lib/$(mcu).o lib/command.o apps/jtag/jtag430asm.o
 app= goodfet
 
 all: $(app).hex
 
+lib/.o: config
+	./configure
+	false
+lib/RUNCONFIG.o:
+	./configure
+	false
+config:
+	cp platforms/$(platform).h include/config.h
+appsfiles:
+	./gen_apps $(hdrs)
+err:;$(ERR)
+builddate:
+	./gen_builddate_h
 goodfet.hex: goodfet
 
 run:
 	../client/goodfet.msp430 test
 
+avrinstall: $(app).hex
+	#to be merged
+	avrdude -V -F -c stk500v1 -p m328p -b 57600 -P $(GOODFET) -U flash:w:$(app).hex
 install: $(app).hex
-	$(BSL) -e
-	ls info.txt && $(BSL) -p info.txt || true  #MSP430F2xx targets only, inelegant.
-	$(BSL) -p $(app).hex 
+	$(MSP430BSL) -e -p $(app).hex 
+installinfo:
+	$(MSP430BSL) -P $(app).hex -p info.txt || true  #MSP430F2xx targets only, inelegant.
 verify:
-	$(BSL) -P $(app).hex -v $(app).hex
+	$(MSP430BSL) -P $(app).hex -v $(app).hex
 dumpinfo:
-	$(BSL) --dumpinfo
-$(app): $(app).c $(libs) $(apps)
+	$(MSP430BSL) --dumpinfo
+$(app).c: config builddate appsfiles err
+$(app): $(libs) $(apps)
 $(app).hex: $(app)
 	msp430-objcopy goodfet -O ihex goodfet.hex
 m4s: $(app).hex
 	msp430-objdump -D -m msp430 $(app).hex | m4s init
 erase:
-	$(BSL) -e 
+	$(MSP430BSL) -e 
 clean:
-	rm -f $(app) $(app).hex $(libs) $(apps)
+	rm -f $(app) $(app).hex $(libs) $(apps) lib/apps.c include/config.h include/builddate.h include/apps.h
 docs:
 	doxygen
 pushdocs: docs
 	rsync --exclude .svn -ave ssh doc/html/* travisutk,goodfet@web.sourceforge.net:htdocs/docs/
 .FAKE: docs
+