X-Git-Url: http://git.rot13.org/?p=goodfet;a=blobdiff_plain;f=firmware%2FMakefile;h=35a8bb66217f7ca235a2a27b17451ed4dc08cbe7;hp=849c5feb397172159138ca0d4f60bf2c35e5c191;hb=8c97f896b9cf1b9b6ddf25420c9d9f04516ddd11;hpb=350c674c6bcd97ec2f883b07e0cf49eb8a480183

diff --git a/firmware/Makefile b/firmware/Makefile
index 849c5fe..35a8bb6 100644
--- a/firmware/Makefile
+++ b/firmware/Makefile
@@ -1,57 +1,25 @@
 -include config.mk
 
-#platform?=goodfet
-#platform?=telosb
-#platform?=z1
-#platform?=nhbadge
-#platform?=nhbadgeb
-#platofrm?=arduino
-#platform?=tilaunchpad
-platform?=goodfet
-
-# donb
-ifeq ($(platform),donbfet)
-GCC?=avr-gcc
-mcu?=atmega644p
-CFLAGS=$(DEBUG) -mmcu=$(mcu) -W -Os -mcall-prologues -Wall -Wextra -Wuninitialized -fpack-struct -fshort-enums -funsigned-bitfields
-endif
 
-ifeq ($(platform),tilaunchpad)
-mcu?=msp430x1612
-CFLAGS+=-DDEBUG_LEVEL=3 -DDEBUG_START=1 -DINBAND_DEBUG
-#CFLAGS+= -Werror
-endif
+platform?=goodfet
+mcu?=RUNCONFIG
 
 #include `uname`.mak
 GOODFET?=/dev/tty.usbser*
 
-#For Arduino,
-#BSL?=avrdude -V -F -c stk500v1 -p m328p -b 57600 -P /dev/tty.usbserial-* -U flash:w:blink.hex
 #For tos-bsl, use --invert-reset --invert-test
 MSP430BSL?=goodfet.bsl --speed=38400
 JTAG=msp430-jtag
 
-#One of these should be defined explicitly.
-#Default removed because of confusion.
-
-#mcu?=msp430x2618
-#mcu?=msp430x1612
-#mcu?=atmega168
-mcu?=RUNCONFIG
-
 
-#N.B., gcc WILL NOT BITCH if this file doesn't exist.
 GCCINC?=
 
-#GCC?=avr-gcc
-# We use -Wl,-dT because gcc adds the msp430mcu definitions at the
-# very end of the command line, so they only have an effect for a
-# default linker script
-GCC?=msp430-gcc
-LDFLAGS?=-Wl,-dT ldscripts/msp430.x
+#All of these are ?= in order ot allow overriding.
+GCC?=msp430-gcc -mmcu=$(mcu)
+LDFLAGS?=-mmcu=$(mcu) #-Wl,-dT ldscripts/$(mcu).x
 
-CCEXTRA?=  $(CFLAGS) -D$(mcu) -D$(platform) -Dplatform=$(platform) $(GCCINC) -I include -I platforms
-CC=$(GCC) -Wall -Os -fno-strict-aliasing -g -mmcu=$(mcu)  $(CCEXTRA)
+CCEXTRA ?=  $(CFLAGS) -D$(mcu) -D$(platform) -Dplatform=$(platform) -Dboard=$(board) $(GCCINC) -I include -I platforms
+CC =$(GCC) -Wall -O1 -fno-strict-aliasing -g   $(CCEXTRA)
 
 # Available Applications
 # ======================
@@ -126,13 +94,9 @@ CC=$(GCC) -Wall -Os -fno-strict-aliasing -g -mmcu=$(mcu)  $(CCEXTRA)
 ifeq ($(platform),tilaunchpad)
 config ?= monitor chipcon i2c
 else
-config ?= monitor chipcon spi jtag430 jtag430x2 avr openocd ccspi
+config ?= monitor chipcon spi jtag430 jtag430x2 avr openocd ccspi maxusb
 endif
 
-# donb
-ifeq ($(platform),donbfet)
-config=monitor avr spi jscan
-endif
 
 # Build the needed list of app and lib object files from the config
 apps=
@@ -173,6 +137,14 @@ ifeq ($(filter jtag, $(config)), jtag)
 	endif
 endif
 
+# include MAX342x USB drivers.
+ifeq ($(filter maxusb, $(config)), maxusb)
+	ifneq ($(filter apps/usb/maxusb.o, $(apps)), apps/usb/maxusb.o)
+		apps+= apps/usb/maxusb.o
+		hdrs+= maxusb.h
+	endif
+endif
+
 # include the sbw defs if they specified it
 ifeq ($(filter sbw, $(config)), sbw)
 	# if they only specify sbw, include jtag
@@ -300,7 +272,7 @@ endif
 
 # include adc app
 ifeq ($(filter adc, $(config)), adc)
-	ifeq ($(mcu), msp430x2274)
+	ifeq ($(mcu), msp430f2274)
 		apps+= apps/adc/adc.o
 		hdrs+= adc.h
 	else
@@ -386,11 +358,12 @@ installinfo:
 	$(MSP430BSL) -P $(app).hex -p info.txt || true  #MSP430F2xx targets only, inelegant.
 verify:
 	$(MSP430BSL) -P $(app).hex -v $(app).hex
+erase:
+	$(MSP430BSL) -e
+
 endif
 dumpinfo:
 	$(MSP430BSL) --dumpinfo
-erase:
-	$(MSP430BSL) -e
 $(app).c: config builddate appsfiles err
 $(app): $(libs) $(apps)