X-Git-Url: http://git.rot13.org/?p=goodfet;a=blobdiff_plain;f=firmware%2FMakefile;h=49dbf997c47f1c6a1f775f4c9156f76ceec70393;hp=319ffd52097f2575f3c2b3bad568c8f9d1de6566;hb=5bffb24e3e49be3e6667f45950cb158eda019b37;hpb=e5fc8a027fccccf4311771fb364ae86731591101

diff --git a/firmware/Makefile b/firmware/Makefile
index 319ffd5..49dbf99 100644
--- a/firmware/Makefile
+++ b/firmware/Makefile
@@ -12,20 +12,14 @@ MSP430BSL?=goodfet.bsl --speed=38400
 JTAG=msp430-jtag
 
 
-
-
-#N.B., gcc WILL NOT BITCH if this file doesn't exist.
 GCCINC?=
 
-#GCC?=avr-gcc
-# We use -Wl,-dT because gcc adds the msp430mcu definitions at the
-# very end of the command line, so they only have an effect for a
-# default linker script
-GCC?=msp430-gcc
+#All of these are ?= in order ot allow overriding.
+GCC?=msp430-gcc -mmcu=$(mcu)
 LDFLAGS?=-mmcu=$(mcu) #-Wl,-dT ldscripts/$(mcu).x
 
-CCEXTRA?=  $(CFLAGS) -D$(mcu) -D$(platform) -Dplatform=$(platform) -Dboard=$(board) $(GCCINC) -I include -I platforms
-CC=$(GCC) -Wall -Os -fno-strict-aliasing -g -mmcu=$(mcu)  $(CCEXTRA)
+CCEXTRA ?=  $(CFLAGS) -D$(mcu) -D$(platform) -Dplatform=$(platform) -Dboard=$(board) $(GCCINC) -I include -I platforms
+CC =$(GCC) -Wall -O1 -fno-strict-aliasing -g   $(CCEXTRA)
 
 # Available Applications
 # ======================
@@ -70,38 +64,12 @@ CC=$(GCC) -Wall -Os -fno-strict-aliasing -g -mmcu=$(mcu)  $(CCEXTRA)
 
 # Configurations
 # ==============
-# This is what you need to customize to specify which apps you want in your
-# firmware.  The "config" variable is just a space-delimited list of apps you
-# want included.  The makefile will take the list of apps and include all of
-# the proper code needed to build your desired firmware.
-
-# bare minimum
-# config = monitor
-
-# basic JTAG adapter
-# config = monitor jtag
+# This is what you need to customize to specify which apps you want in
+# your firmware.  The "config" variable is just a space-delimited list
+# of apps you want included.  The makefile will take the list of apps
+# and include all of the proper code needed to build your desired
+# firmware.  $(config) is generated by config.mk.
 
-# Chipcon hacking
-# config = monitor chipcon ccspi
-
-# Glitch research
-# config = monitor glitch
-
-# XScale PXA255 JTAG
-# config = monitor jtagxscale
-
-# OpenOCD bit-bang device
-#config = monitor openocd
-
-# Old Default Config
-# config = monitor sbw  chipcon nrf ccspi spi jtagarm7 jtag430 jtag430x2 avr
-
-# New default.
-ifeq ($(platform),tilaunchpad)
-config ?= monitor chipcon i2c
-else
-config ?= monitor chipcon spi jtag430 jtag430x2 avr openocd ccspi
-endif
 
 
 # Build the needed list of app and lib object files from the config
@@ -111,7 +79,7 @@ ifeq ($(platform),tilaunchpad)
 libs= lib/$(platform).o lib/command.o lib/apps.o lib/msp430_serial.o
 #libs+=lib/setjmp.o
 else
-libs= lib/$(mcu).o lib/command.o lib/dco_calib.o lib/apps.o lib/msp430.o lib/arduino.o
+libs= lib/$(mcu).o lib/command.o lib/dco_calib.o lib/apps.o lib/msp430.o lib/arduino.o $(extralibs)
 endif
 
 hdrs=
@@ -143,6 +111,14 @@ ifeq ($(filter jtag, $(config)), jtag)
 	endif
 endif
 
+# include MAX342x USB drivers.
+ifeq ($(filter maxusb, $(config)), maxusb)
+	ifneq ($(filter apps/usb/maxusb.o, $(apps)), apps/usb/maxusb.o)
+		apps+= apps/usb/maxusb.o
+		hdrs+= maxusb.h
+	endif
+endif
+
 # include the sbw defs if they specified it
 ifeq ($(filter sbw, $(config)), sbw)
 	# if they only specify sbw, include jtag
@@ -270,7 +246,7 @@ endif
 
 # include adc app
 ifeq ($(filter adc, $(config)), adc)
-	ifeq ($(mcu), msp430x2274)
+	ifeq ($(mcu), msp430f2274)
 		apps+= apps/adc/adc.o
 		hdrs+= adc.h
 	else
@@ -363,7 +339,7 @@ endif
 dumpinfo:
 	$(MSP430BSL) --dumpinfo
 $(app).c: config builddate appsfiles err
-$(app): $(libs) $(apps)
+$(app): $(app).c $(libs) $(apps) 
 
 ifeq ($(platform),donbfet)
 $(app).hex: $(app)