X-Git-Url: http://git.rot13.org/?p=goodfet;a=blobdiff_plain;f=firmware%2FMakefile;h=5e2c5a305864bd533d5a68dca8b6da8d05ff1e2a;hp=758ecf5a7232727417fba723094b8d2c2eb8091d;hb=f4a366d95f96109559f0903611d7103c50cde3f7;hpb=02ef25dd7b69fd91d5a920e1c08d7724b6818888;ds=sidebyside

diff --git a/firmware/Makefile b/firmware/Makefile
index 758ecf5..5e2c5a3 100644
--- a/firmware/Makefile
+++ b/firmware/Makefile
@@ -1,52 +1,25 @@
 -include config.mk
 
-#platform?=goodfet
-#platform?=telosb
-#platform?=z1
-#platform?=nhbadge
-#platform?=nhbadgeb
-#platofrm?=arduino
-#platform?=tilaunchpad
-platform?=goodfet
-
-# donb
-ifeq ($(platform),donbfet)
-GCC?=avr-gcc
-mcu?=atmega644p
-CFLAGS=$(DEBUG) -mmcu=$(mcu) -W -Os -mcall-prologues -Wall -Wextra -Wuninitialized -fpack-struct -fshort-enums -funsigned-bitfields
-endif
 
+platform?=goodfet
+mcu?=RUNCONFIG
 
 #include `uname`.mak
 GOODFET?=/dev/tty.usbser*
 
-#For Arduino,
-#BSL?=avrdude -V -F -c stk500v1 -p m328p -b 57600 -P /dev/tty.usbserial-* -U flash:w:blink.hex
 #For tos-bsl, use --invert-reset --invert-test
 MSP430BSL?=goodfet.bsl --speed=38400
 JTAG=msp430-jtag
 
-#One of these should be defined explicitly.
-#Default removed because of confusion.
-
-#mcu?=msp430x2618
-#mcu?=msp430x1612
-#mcu?=atmega168
-mcu?=RUNCONFIG
-
 
-#N.B., gcc WILL NOT BITCH if this file doesn't exist.
 GCCINC?=
 
-#GCC?=avr-gcc
-# We use -Wl,-dT because gcc adds the msp430mcu definitions at the
-# very end of the command line, so they only have an effect for a
-# default linker script
-GCC?=msp430-gcc
-LDFLAGS?=-Wl,-dT ldscripts/$(mcu).x
+#All of these are ?= in order ot allow overriding.
+GCC?=msp430-gcc -mmcu=$(mcu)
+LDFLAGS?=-mmcu=$(mcu) #-Wl,-dT ldscripts/$(mcu).x
 
-CCEXTRA?=  $(CFLAGS) -D$(mcu) -D$(platform) -Dplatform=$(platform) $(GCCINC) -I include -I platforms
-CC=$(GCC) -Wall -Os -fno-strict-aliasing -g -mmcu=$(mcu)  $(CCEXTRA)
+CCEXTRA ?=  $(CFLAGS) -D$(mcu) -D$(platform) -Dplatform=$(platform) -Dboard=$(board) $(GCCINC) -I include -I platforms
+CC =$(GCC) -Wall -O1 -fno-strict-aliasing -g   $(CCEXTRA)
 
 # Available Applications
 # ======================
@@ -64,11 +37,11 @@ CC=$(GCC) -Wall -Os -fno-strict-aliasing -g -mmcu=$(mcu)  $(CCEXTRA)
 # ALPHA:
 # jtag430 -- 16-bit MSP430 JTAG
 # jtag430x2 -- 20-bit MSP430 JTAG
+# jtagarm7 -- ARM7TDMI JTAG
 
 # PRE-ALPHA:
 #  Bus protocols:
 # i2c -- Turns GF into USB-to-i2c adapter
-# jtagarm7 -- ARM7TDMI JTAG
 # ejtag -- MIPS JTAG
 # jtagxscale -- XScale JTAG
 # openocd -- OpenOCD bitbang device
@@ -79,9 +52,11 @@ CC=$(GCC) -Wall -Os -fno-strict-aliasing -g -mmcu=$(mcu)  $(CCEXTRA)
 # pic -- PIC24H/dsPIC33F debugger
 # adc -- ADC10 (still specific to x2274, GoodFET32)
 
-#  Radios:
+#  Radions:
 # nrf -- Nordic RF SPI
 # ccspi -- Chipcon SPI
+# cc2500 -- Chipcon SPI CC2500
+# atmel_radio -- Atmel radio
 
 # Miscelaneous:
 # glitch -- Glitch research tool
@@ -91,38 +66,12 @@ CC=$(GCC) -Wall -Os -fno-strict-aliasing -g -mmcu=$(mcu)  $(CCEXTRA)
 
 # Configurations
 # ==============
-# This is what you need to customize to specify which apps you want in your
-# firmware.  The "config" variable is just a space-delimited list of apps you
-# want included.  The makefile will take the list of apps and include all of
-# the proper code needed to build your desired firmware.
-
-# bare minimum
-# config = monitor
-
-# basic JTAG adapter
-# config = monitor jtag
-
-# Chipcon hacking
-# config = monitor chipcon ccspi
-
-# Glitch research
-# config = monitor glitch
-
-# XScale PXA255 JTAG
-# config = monitor jtagxscale
-
-# OpenOCD bit-bang device
-#config = monitor openocd
-
-# Old Default Config
-# config = monitor sbw  chipcon nrf ccspi spi jtagarm7 jtag430 jtag430x2 avr
+# This is what you need to customize to specify which apps you want in
+# your firmware.  The "config" variable is just a space-delimited list
+# of apps you want included.  The makefile will take the list of apps
+# and include all of the proper code needed to build your desired
+# firmware.  $(config) is generated by config.mk.
 
-# New default.
-ifeq ($(platform),tilaunchpad)
-config ?= monitor chipcon i2c
-else
-config ?= monitor chipcon spi jtag430 jtag430x2 avr openocd ccspi
-endif
 
 
 # Build the needed list of app and lib object files from the config
@@ -132,7 +81,7 @@ ifeq ($(platform),tilaunchpad)
 libs= lib/$(platform).o lib/command.o lib/apps.o lib/msp430_serial.o
 #libs+=lib/setjmp.o
 else
-libs= lib/$(mcu).o lib/command.o lib/dco_calib.o lib/apps.o lib/msp430.o lib/arduino.o
+libs= lib/$(mcu).o lib/command.o lib/dco_calib.o lib/apps.o lib/msp430.o lib/arduino.o $(extralibs)
 endif
 
 hdrs=
@@ -164,6 +113,14 @@ ifeq ($(filter jtag, $(config)), jtag)
 	endif
 endif
 
+# include MAX342x USB drivers.
+ifeq ($(filter maxusb, $(config)), maxusb)
+	ifneq ($(filter apps/usb/maxusb.o, $(apps)), apps/usb/maxusb.o)
+		apps+= apps/usb/maxusb.o
+		hdrs+= maxusb.h
+	endif
+endif
+
 # include the sbw defs if they specified it
 ifeq ($(filter sbw, $(config)), sbw)
 	# if they only specify sbw, include jtag
@@ -291,7 +248,7 @@ endif
 
 # include adc app
 ifeq ($(filter adc, $(config)), adc)
-	ifeq ($(mcu), msp430x2274)
+	ifeq ($(mcu), msp430f2274)
 		apps+= apps/adc/adc.o
 		hdrs+= adc.h
 	else
@@ -305,12 +262,24 @@ ifeq ($(filter ccspi, $(config)), ccspi)
 	hdrs+= ccspi.h
 endif
 
+# include chipcon CC2500 radio spi app
+ifeq ($(filter cc2500, $(config)), cc2500)
+	apps+= apps/radios/cc2500.o
+	hdrs+= cc2500.h
+endif
+
 # include nrf app
 ifeq ($(filter nrf, $(config)), nrf)
 	apps+= apps/radios/nrf.o
 	hdrs+= nrf.h
 endif
 
+# include atmel_radio app
+ifeq ($(filter atmel_radio, $(config)), atmel_radio)
+	apps+= apps/radios/atmel_radio.o
+	hdrs+= atmel_radio.h
+endif
+
 # include glitch app
 ifeq ($(filter glitch, $(config)), glitch)
 	apps+= apps/glitch/glitch.o
@@ -323,10 +292,10 @@ ifeq ($(filter smartcard, $(config)), smartcard)
 	hdrs+= smartcard.h
 endif
 
-# include ps2 app
-ifeq ($(filter ps2, $(config)), ps2)
-	apps+= apps/plugins/ps2.o
-	hdrs+= ps2.h
+# include plugin app
+ifeq ($(filter plugin, $(config)), plugin)
+	apps+= apps/plugin.o
+	hdrs+= plugin.h
 endif
 
 # include jscan app
@@ -361,7 +330,11 @@ run:
 
 avrinstall: $(app).hex
 	#to be merged
+ifdef AVR_PLATFORM
+	avrdude -V -F -c stk500v1 -p $(AVR_PLATFORM) -b 57600 -P $(GOODFET) -U flash:w:$(app).hex
+else
 	avrdude -V -F -c stk500v1 -p m328p -b 57600 -P $(GOODFET) -U flash:w:$(app).hex
+endif
 
 ifeq ($(platform),tilaunchpad)
 install: $(app).hex
@@ -372,19 +345,26 @@ erase:
 	$(JTAG) -e $(app).hex
 else
 install: $(app).hex
+	#Note that 'make install' no longer erases the chip.
+	#Use 'make reinstall' if you want that.
+	$(MSP430BSL) -p $(app).hex
+reinstall: $(app).hex
 	$(MSP430BSL) -e -p $(app).hex
 installinfo:
 	$(MSP430BSL) -P $(app).hex -p info.txt || true  #MSP430F2xx targets only, inelegant.
 verify:
 	$(MSP430BSL) -P $(app).hex -v $(app).hex
+erase:
+	$(MSP430BSL) -e
+
 endif
 dumpinfo:
 	$(MSP430BSL) --dumpinfo
-erase:
-	$(MSP430BSL) -e
 $(app).c: config builddate appsfiles err
-$(app): $(libs) $(apps)
-
+$(app): $(app).o $(libs) $(apps) 
+armlink: $(app).o $(libs) $(apps) $(platformlibs)
+	arm-none-eabi-ld -v -Tlinkers/stm32f407.cmd -nostartfiles -o goodfet.elf $(app).o $(libs) $(apps)
+	arm-none-eabi-objcopy -Obinary goodfet.elf goodfet.bin
 ifeq ($(platform),donbfet)
 $(app).hex: $(app)
 	avr-objcopy -j .text -j .data -O ihex goodfet goodfet.hex
@@ -395,7 +375,7 @@ endif
 m4s: $(app).hex
 	msp430-objdump -D -m msp430 $(app).hex | m4s init
 clean:
-	rm -f $(app) $(app).hex $(libs) $(apps) lib/apps.c include/config.h include/builddate.h include/apps.h
+	rm -f *.o $(app) $(app).hex $(libs) $(apps) lib/apps.c include/config.h include/builddate.h include/apps.h
 docs:
 	doxygen
 pushdocs: docs