X-Git-Url: http://git.rot13.org/?p=goodfet;a=blobdiff_plain;f=firmware%2Fapps%2Favr%2Favr.c;h=0cc4c0da79842727fd70833ad4dba75b8321400d;hp=c86711dec017f558c53a9fa0366af1b2f6e59707;hb=3e4992b4d109f361b42abdda403471860edfeabf;hpb=4d264916c0263052ba7316d7127de6b4cfe8145c

diff --git a/firmware/apps/avr/avr.c b/firmware/apps/avr/avr.c
index c86711d..0cc4c0d 100644
--- a/firmware/apps/avr/avr.c
+++ b/firmware/apps/avr/avr.c
@@ -11,6 +11,7 @@
 #include <iomacros.h>
 
 #include "avr.h"
+//#include "glitch.h"
 
 //! Setup the AVR pins.
 void avrsetup(){
@@ -19,26 +20,30 @@ void avrsetup(){
 
 //! Initialized an attached AVR.
 void avrconnect(){
-  register int i;
-  avrsetup();//set I/O pins
+  //set I/O pins
+  avrsetup(); //Cut this?
+  
+  SETSS;
+  //delay(50);
   
   //Pulse !RST (SS) at least twice while CLK is low.
   CLRCLK;
   CLRSS;
+  //delay(5);
 
   SETSS;
   CLRCLK;
-  delay(500);
+  //delay(5);
   CLRSS;
-  delay(500);
+  //delay(5);
   
   //Enable programming
   avr_prgen();
 }
 
-//! Read and write an SPI byte.
-unsigned char avrtrans8(unsigned char byte){
-  register unsigned int bit;
+//! Read and write an SPI byte with delays.
+u8 avrtrans8(u8 byte){
+  register u16 bit;
   //This function came from the SPI Wikipedia article.
   //Minor alterations.
   
@@ -67,9 +72,8 @@ u8 avrexchange(u8 a, u8 b, u8 c, u8 d){
   avrtrans8(a);
   avrtrans8(b);
   if(avrtrans8(c)!=b){
-    debugstr("AVR sync error, b not returned as c.");
-  }else{
-    debugstr("Synced properly.");
+    //debugstr("AVR sync error, b not returned as c.");
+    //Reconnect here?
   }
   return avrtrans8(d);
 }
@@ -79,41 +83,145 @@ void avr_prgen(){
   avrexchange(0xAC, 0x53, 0, 0);
 }
 
+//! Is the AVR ready or busy?
+u8 avr_isready(){
+  return avrexchange(0xF0, 0, 0, 0);
+}
+
 //! Read AVR device code.
-u8 avr_devicecode(){
+u8 avr_sig(u8 i){
   return avrexchange(0x30, //Read signature byte
 	      0x00,
-	      0x00, //&0x03 is sig adr
-	      0x00 //don't care.
+	      i&0x03,      //sig adr
+	      0x00         //don't care.
 	      );
 }
 
+//! Erase an AVR device
+void avr_erase(){
+  avrexchange(0xAC, 0x80, 0, 0);
+}
+
+//! Read lock bits.
+u8 avr_lockbits(){
+  return avrexchange(0x58, 0, 0, 0);
+}
+//! Write lock bits.
+void avr_setlock(u8 bits){
+  avrexchange(0xAC,0xE0,0x00,
+	      bits);
+}
+
+//! Read a byte of EEPROM.
+u8 avr_peekeeprom(u16 adr){
+  return avrexchange(0xA0, adr>>8, adr&0xFF, 0);
+}
+//! Read a byte of EEPROM.
+u8 avr_pokeeeprom(u16 adr, u8 val){
+  return avrexchange(0xC0, adr>>8, adr&0xFF, val);
+}
+
+//! Read a byte of Flash
+u8 avr_peekflash(u16 adr){
+  u16 a=adr>>1;
+  if(adr&1) //high byte
+    return avrexchange(0x28,a>>8,a&0xff,0);
+  else      //low byte
+    return avrexchange(0x20,a>>8,a&0xff,0);
+}
+
+void avr_bulk_load(u16 start, u16 len, u8 *data) {
+  u16 adr;
+  for (adr = 0; adr < len; adr++) {
+    u16 a = adr + start;
+    avrexchange((adr & 1) ? 0x48 : 0x40,
+		a >> 9,
+		(a >> 1) & 0xff,
+		data[adr]);
+  }
+}
+
 //! Handles an AVR command.
 void avrhandle(unsigned char app,
 	       unsigned char verb,
 	       unsigned long len){
   unsigned long i;
+  unsigned int at;
   
+  /*
+  if(!avr_isready() && connected)
+    debugstr("AVR is not yet ready.");
+  */
   
   switch(verb){
   case READ:
   case WRITE:
     for(i=0;i<len;i++)
-      cmddata[i]=spitrans8(cmddata[i]);
+      cmddata[i]=avrtrans8(cmddata[i]);
     txdata(app,verb,len);
     break;
   case SETUP:
     avrsetup();
     txdata(app,verb,0);
     break;
-  case START://returns device code
+  case START:
     avrconnect();
-    //no break here
+    txdata(app,verb,0);
+    break;//Used to fall through here.
+  case STOP:
+    SETSS;
+    txdata(app, verb, 0);
   case AVR_PEEKSIG:
-    cmddata[0]=avr_devicecode();
+    for(i=0;i<4;i++)
+      cmddata[i]=avr_sig(i);
+    txdata(app,verb,4);
+    break;
+  case AVR_ERASE:
+    avr_erase();
+    txdata(app,verb,0);
+    break;
+  case AVR_PEEKLOCK:
+    cmddata[0]=avr_lockbits();
     txdata(app,verb,1);
     break;
+  case AVR_POKELOCK:
+    avr_setlock(cmddata[0]);
+    txdata(app,verb,0);
+    break;
+  case AVR_POKEEEPROM:
+    avr_pokeeeprom(cmddataword[0], cmddata[2]);
+    //no break here.
+  case AVR_PEEKEEPROM:
+    cmddata[0]=avr_peekeeprom(cmddataword[0]);
+    txdata(app,verb,1);
+    break;
+  case AVR_BULKLOAD:
+    if (len < 3) {
+      debugstr("Length too short");
+      txdata(app, NOK, 0);
+    } else {
+      at = cmddataword[0];
+      avr_bulk_load(at, len - 2, cmddata + 2);
+      txdata(app, verb, 0);
+    }
+    break;
   case PEEK:
+    //cmddata[0]=avr_peekflash(cmddataword[0]);
+    //txdata(app,verb,1);
+    at=cmddataword[0];
+    
+    //Fetch large blocks for bulk fetches,
+    //small blocks for individual peeks.
+    if(len>2){
+      len=(cmddataword[1]);//always even.
+    }else{
+      len=1;
+    }
+    txhead(app,verb,len);
+    for(i=0;i<len;i++){
+      serial_tx(avr_peekflash(at++));
+    }
+    break;
   case POKE:
   default:
     debugstr("Verb unimplemented in AVR application.");