X-Git-Url: http://git.rot13.org/?p=goodfet;a=blobdiff_plain;f=firmware%2Fapps%2Fchipcon%2Fchipcon.c;h=28440c48e36718c1cd7ca65aa4c87b9014791d3b;hp=d4e81775defc775e09e9186bedad105bd2f07eaa;hb=1265496073840b32e1e57b8b23f2d4de4bcb78c4;hpb=d0a3fb542f527cbf9a4a27beecc8c3cd76ff4625

diff --git a/firmware/apps/chipcon/chipcon.c b/firmware/apps/chipcon/chipcon.c
index d4e8177..28440c4 100644
--- a/firmware/apps/chipcon/chipcon.c
+++ b/firmware/apps/chipcon/chipcon.c
@@ -1,17 +1,16 @@
-//GoodFET ChipCon Debugging Application
-//Handles basic I/O for the Chipcon 8051 debugging protocol.
+/*! \file chipcon.c
+  \author Travis Goodspeed
+  \brief Chipcon 8051 debugging.
+*/
 
-//Higher level left to client application.
 
 //This is like SPI, except that you read or write, not both.
 
-/** N.B. The READ verb performs a write of all (any) supplied data,
+/* N.B. The READ verb performs a write of all (any) supplied data,
     then reads a single byte reply from the target.  The WRITE verb
     only writes.
 */
 
-//This is REALLY untested.
-
 #include "platform.h"
 #include "command.h"
 #include "chipcon.h"
@@ -21,7 +20,7 @@
 #include <iomacros.h>
 
 
-/** Concerning clock rates,
+/* Concerning clock rates,
     the maximimum clock rates are defined on page 4 of the spec.
     They vary, but are roughly 30MHz.  Raising this clock rate might
     allow for clock glitching, but the GoodFET isn't sufficient fast for that.
@@ -37,7 +36,7 @@
 
 //This could be more accurate.
 //Does it ever need to be?
-#define CCSPEED 0
+#define CCSPEED 3
 #define CCDELAY(x) delay(x)
 
 #define SETMOSI P5OUT|=MOSI
@@ -125,7 +124,10 @@ void ccread(unsigned char len){
 //! Handles a monitor command.
 void cchandle(unsigned char app,
 	       unsigned char verb,
-	       unsigned char len){
+	       unsigned long len){
+  //Always init.  Might help with buggy lines.
+  ccdebuginit();
+  
   switch(verb){
     //CC_PEEK and CC_POKE will come later.
   case READ:  //Write a command and return 1-byte reply.
@@ -217,7 +219,6 @@ void cchandle(unsigned char app,
     txdata(app,verb,1);
     break;
   case CC_SET_PC:
-    
   case CC_CLOCK_INIT:
   case CC_WRITE_FLASH_PAGE:
   case CC_MASS_ERASE_FLASH:
@@ -333,6 +334,11 @@ unsigned char cc_debug(unsigned char len,
 	      unsigned char c){
   unsigned char cmd=0x54+(len&0x3);//(len&0x3);
   CCWRITE;
+  cctrans8(0xFF);//resync
+  cctrans8(0xFF);//resync
+  cctrans8(0xFF);//resync
+  cctrans8(0xFF);//resync
+  cctrans8(0xFF);//resync
   cctrans8(cmd);
   if(len--)
     cctrans8(a);
@@ -362,7 +368,7 @@ unsigned char cc_peekcodebyte(unsigned long adr){
   //CLR A
   cc_debug(2, 0xE4, 0, 0);
   //MOVC A, @A+DPTR;
-  toret=cc_debug(1, 0x93, 0, 0);
+  toret=cc_debug(3, 0x93, 0, 0);
   //INC DPTR
   //cc_debug(1, 0xA3, 0, 0);