X-Git-Url: http://git.rot13.org/?p=goodfet;a=blobdiff_plain;f=firmware%2Fapps%2Fglitch%2Fglitch.c;h=e3b226ddef01d4ab5b51f9ab3aeed3e67cad2815;hp=1e7330dd49707df2876f56f94957ebdd58a3f534;hb=c9fa78dd91736cd5004d23fd9535c30be4f978ff;hpb=eddb0eb08f187dc156a6cb51878104df67d97436

diff --git a/firmware/apps/glitch/glitch.c b/firmware/apps/glitch/glitch.c
index 1e7330d..e3b226d 100644
--- a/firmware/apps/glitch/glitch.c
+++ b/firmware/apps/glitch/glitch.c
@@ -23,20 +23,99 @@ void glitchsetup(){
   P6OUT|=0x40;
   
   glitchsetupdac();
+
+  WDTCTL = WDTPW + WDTHOLD;             // Stop WDT                                                                                                                                
+  TACTL = TASSEL1 + TACLR;              // SMCLK, clear TAR                                                                                                                        
+  CCTL0 = CCIE;                         // CCR0 interrupt enabled                                                                                                                  
+  CCR0 = glitchcount;
+  TACTL |= MC1;                         // Start Timer_A in continuous mode                                                                                                        
+  _EINT();                              // Enable interrupts 
 #endif
 }
 
 //! Setup analog chain for glitching.
 void glitchsetupdac(){
-#ifdef DAC12IR
+  glitchvoltages(glitchL,glitchH);
+}
+
+// Timer A0 interrupt service routine                                                                                                                                              
+interrupt(TIMERA0_VECTOR) Timer_A (void)
+{
+  
+  switch(glitchstate){
+  case 0:
+    P1OUT|=1;
+    glitchstate=1;
+    DAC12_0DAT = glitchH;
+    break;
+  case 1:
+    P1OUT|=1;
+    glitchstate=0;
+    DAC12_0DAT = glitchL;
+    break;
+  default:
+    P1OUT&=~1;
+    //Do nothing.
+    break;
+  }
+  CCR0 += glitchcount;                        // Add Offset to CCR0                                                                                                                      
+}
+
+
+
+
+u16 glitchH=0xfff, glitchL=0xfff,
+  glitchstate=2, glitchcount=0;
+
+//! Glitch an application.
+void glitchapp(u8 app){
+  debugstr("That app is not yet supported.");
+}
+
+
+//! Set glitching voltages.
+void glitchvoltages(u16 low, u16 high){
   int i;
+  glitchH=high;
+  glitchL=low;
+  
+  
+  #ifdef DAC12IR
   ADC12CTL0 = REF2_5V + REFON;                  // Internal 2.5V ref on
   // Delay here for reference to settle.
   for(i=0;i!=0xFFFF;i++) asm("nop");
   DAC12_0CTL = DAC12IR + DAC12AMP_5 + DAC12ENC; // Int ref gain 1
   // 1.0V 0x0666, 2.5V 0x0FFF
-  DAC12_0DAT = 0x0FFF;
+  DAC12_0DAT = high;
   //DAC12_0DAT = 0x0880;
-  //__bis_SR_register(LPM0_bits + GIE);           // Enter LPM0
-#endif 
+  #endif 
+}
+//! Set glitching rate.
+void glitchrate(u16 rate){
+  glitchcount=rate;
+}
+
+
+//! Handles a monitor command.
+void glitchhandle(unsigned char app,
+		  unsigned char verb,
+		  unsigned long len){
+  switch(verb){
+  case GLITCHVOLTAGES:
+    glitchvoltages(cmddataword[0],
+		   cmddataword[1]);
+    txdata(app,verb,0);
+    break;
+  case GLITCHRATE:
+    glitchrate(cmddataword[0]);
+    txdata(app,verb,0);
+    break;
+  case START:
+  case STOP:
+  case GLITCHAPP:
+  case GLITCHVERB:
+  default:
+    debugstr("Unknown glitching verb.");
+    txdata(app,NOK,0);
+  }
 }