X-Git-Url: http://git.rot13.org/?p=goodfet;a=blobdiff_plain;f=firmware%2Fapps%2Fjtag%2Fjtag430.c;h=65d4e3183780a59b186bb1b33f666dd4596f475d;hp=123eefa10da2995203510d10e85ebdcd0f69a81a;hb=32f20cd81c67f9cfb9bd11b9b62942ff60d9b2f4;hpb=3bf98a899ca8003835b69d949d299369a5d7a4f7

diff --git a/firmware/apps/jtag/jtag430.c b/firmware/apps/jtag/jtag430.c
index 123eefa..65d4e31 100644
--- a/firmware/apps/jtag/jtag430.c
+++ b/firmware/apps/jtag/jtag430.c
@@ -4,6 +4,8 @@
 #include "jtag.h"
 
 
+unsigned int jtag430mode=MSP430X2MODE;
+
 //! Set the program counter.
 void jtag430_setpc(unsigned int adr){
   jtag_ir_shift8(IR_CNTRL_SIG_16BIT);
@@ -49,6 +51,7 @@ unsigned int jtag430_readmem(unsigned int adr){
   
   CLRTCLK;
   jtag_ir_shift8(IR_CNTRL_SIG_16BIT);
+  
   if(adr>0xFF)
     jtag_dr_shift16(0x2409);//word read
   else
@@ -79,28 +82,6 @@ void jtag430_writemem(unsigned int adr, unsigned int data){
   SETTCLK;
 }
 
-//! Defined in jtag430asm.S
-void jtag430_tclk_flashpulses(int);
-/* //! Pulse TCLK at 350kHz +/- 100kHz */
-/* void jtag430_tclk_flashpulses(register i){ */
-/*   //TODO check this on a scope. */
-/*   register j=0; */
-  
-/*   //At 2MHz, 350kHz is obtained with 5 clocks of delay */
-  
-/*   /\** Pondering: */
-/*       What happens if the frequency is too low or to high? */
-/*       Is there any risk of damaging the chip, or only of a poor write? */
-/*   *\/ */
-/*   while(j++!=i){ */
-/*     SETTCLK; */
-/*     _NOP(); */
-/*     _NOP(); */
-/*     _NOP(); */
-/*     CLRTCLK; */
-/*   } */
-/* } */
-
 //! Write data to flash memory.  Must be preconfigured.
 void jtag430_writeflashword(unsigned int adr, unsigned int data){
   /*
@@ -149,6 +130,8 @@ void jtag430_writeflash(unsigned int adr, unsigned int data){
   jtag430_releasecpu();
 }
 
+
+
 //! Power-On Reset
 void jtag430_por(){
   unsigned int jtagid;
@@ -278,10 +261,12 @@ void jtag430_setinstrfetch(){
   }
 }
 
-//! Handles unique MSP430 JTAG commands.  Forwards others to JTAG.
-void jtag430handle(unsigned char app,
+
+//! Handles classic MSP430 JTAG commands.  Forwards others to JTAG.
+void oldjtag430handle(unsigned char app,
 		   unsigned char verb,
 		   unsigned char len){
+  
   switch(verb){
   case START:
     //Enter JTAG mode.
@@ -336,3 +321,16 @@ void jtag430handle(unsigned char app,
   jtag430_resettap();
 }
 
+//! Handles unique MSP430 JTAG commands.  Forwards others to JTAG.
+void jtag430handle(unsigned char app,
+		   unsigned char verb,
+		   unsigned char len){
+  switch(jtag430mode){
+  case MSP430MODE:
+    return oldjtag430handle(app,verb,len);
+  case MSP430X2MODE:
+    return jtag430x2handle(app,verb,len);
+  default:
+    txdata(app,NOK,0);
+  }
+}