X-Git-Url: http://git.rot13.org/?p=goodfet;a=blobdiff_plain;f=firmware%2Fapps%2Fjtag%2Fjtag430.c;h=ce4e7b63718d7146f846592fb4013b5822cc913a;hp=52601d852cb6cfda757ddea78a01e9b7b0d8459d;hb=fa5713a93ff59ebdd126f5b7914a96b5030b32fb;hpb=dd37f96a4f842ea15233b8d0efd4ec001ad5de9c

diff --git a/firmware/apps/jtag/jtag430.c b/firmware/apps/jtag/jtag430.c
index 52601d8..ce4e7b6 100644
--- a/firmware/apps/jtag/jtag430.c
+++ b/firmware/apps/jtag/jtag430.c
@@ -1,3 +1,7 @@
+/*! \file jtag430.c
+  \author Travis Goodspeed <travis at radiantmachines.com>
+  \brief MSP430 JTAG (16-bit)
+*/
 
 #include "platform.h"
 #include "command.h"
@@ -48,6 +52,8 @@ void jtag430_releasecpu(){
 //! Read data from address
 unsigned int jtag430_readmem(unsigned int adr){
   unsigned int toret;
+  jtag430_haltcpu();
+  
   
   CLRTCLK;
   jtag_ir_shift8(IR_CNTRL_SIG_16BIT);
@@ -82,10 +88,9 @@ void jtag430_writemem(unsigned int adr, unsigned int data){
   SETTCLK;
 }
 
-
 //! Write data to flash memory.  Must be preconfigured.
 void jtag430_writeflashword(unsigned int adr, unsigned int data){
-  /*
+  
   CLRTCLK;
   jtag_ir_shift8(IR_CNTRL_SIG_16BIT);
   jtag_dr_shift16(0x2408);//word write
@@ -99,12 +104,13 @@ void jtag430_writeflashword(unsigned int adr, unsigned int data){
   CLRTCLK;
   jtag_ir_shift8(IR_CNTRL_SIG_16BIT);
   jtag_dr_shift16(0x2409);
-  */
   
+  /*
   jtag430_writemem(adr,data);
   CLRTCLK;
   jtag_ir_shift8(IR_CNTRL_SIG_16BIT);
   jtag_dr_shift16(0x2409);
+  */
   
   //Pulse TCLK
   jtag430_tclk_flashpulses(35); //35 standard
@@ -120,7 +126,7 @@ void jtag430_writeflash(unsigned int adr, unsigned int data){
   //FCTL2=0xA540, selecting MCLK as source, DIV=1
   jtag430_writemem(0x012A, 0xA540);
   //FCTL3=0xA500, should be 0xA540 for Info Seg A on 2xx chips.
-  jtag430_writemem(0x012C, 0xA500);
+  jtag430_writemem(0x012C, 0xA500); //all but info flash.
   
   //Write the word itself.
   jtag430_writeflashword(adr,data);
@@ -128,7 +134,7 @@ void jtag430_writeflash(unsigned int adr, unsigned int data){
   //FCTL1=0xA500, disabling flash write
   jtag430_writemem(0x0128, 0xA500);
   
-  jtag430_releasecpu();
+  //jtag430_releasecpu();
 }
 
 
@@ -184,7 +190,7 @@ void jtag430_eraseflash(unsigned int mode, unsigned int adr, unsigned int count)
   //FCTL1=0xA500, disabling flash write
   jtag430_writemem(0x0128, 0xA500);
   
-  jtag430_releasecpu();
+  //jtag430_releasecpu();
 }
 
 
@@ -192,8 +198,9 @@ void jtag430_eraseflash(unsigned int mode, unsigned int adr, unsigned int count)
 void jtag430_resettap(){
   int i;
   // Settle output
+  SETTDI; //430X2
   SETTMS;
-  SETTDI;
+  //SETTDI; //classic
   SETTCK;
 
   // Navigate to reset state.
@@ -212,7 +219,7 @@ void jtag430_resettap(){
 
     
   /* sacred, by spec.
-     Sometimes this isn't necessary. */
+     Sometimes this isn't necessary.  */
   // fuse check
   CLRTMS;
   delay(50);
@@ -236,21 +243,25 @@ void jtag430_start(){
   
   //Entry sequence from Page 67 of SLAU265A for 4-wire MSP430 JTAG
   CLRRST;
-  delay(100);
+  delay(100); //100
   CLRTST;
-  delay(50);
+  delay(50);  //50
   SETTST;
-  delay(50);
+  delay(50);  //50
   SETRST;
   P5DIR&=~RST;
   delay(0xFFFF);
   
   //Perform a reset and disable watchdog.
   jtag430_por();
+  jtag430_writemem(0x120,0x5a80);//disable watchdog
+  
+  jtag430_haltcpu();
 }
 
 //! Set CPU to Instruction Fetch
 void jtag430_setinstrfetch(){
+  
   jtag_ir_shift8(IR_CNTRL_SIG_CAPTURE);
 
   // Wait until instruction fetch state.
@@ -264,9 +275,14 @@ void jtag430_setinstrfetch(){
 
 
 //! Handles classic MSP430 JTAG commands.  Forwards others to JTAG.
-void oldjtag430handle(unsigned char app,
+void jtag430handle(unsigned char app,
 		   unsigned char verb,
 		   unsigned char len){
+  register char blocks;
+  unsigned long at;
+  unsigned int i, val;
+  
+  //debugstr("Classic MSP430 handler.");
   
   switch(verb){
   case START:
@@ -274,6 +290,7 @@ void oldjtag430handle(unsigned char app,
     jtag430_start();
     //TAP setup, fuse check
     jtag430_resettap();
+    
     txdata(app,verb,0);
     break;
   case JTAG430_HALTCPU:
@@ -288,21 +305,47 @@ void oldjtag430handle(unsigned char app,
     jtag430_setinstrfetch();
     txdata(app,verb,0);
     break;
-
     
   case JTAG430_READMEM:
   case PEEK:
+    /*
     cmddataword[0]=jtag430_readmem(cmddataword[0]);
     txdata(app,verb,2);
+    */
+    blocks=(len>4?cmddata[4]:1);
+    at=cmddatalong[0];
+    
+    //Fetch large blocks for bulk fetches,
+    //small blocks for individual peeks.
+    if(blocks>1)
+      len=0x80;
+    
+    serial_tx(app);
+    serial_tx(verb);
+    serial_tx(len);
+    
+    while(blocks--){
+      for(i=0;i<len;i+=2){
+	jtag430_resettap();
+	//delay(10);
+	
+	val=jtag430_readmem(at);
+	
+	at+=2;
+	serial_tx(val&0xFF);
+	serial_tx((val&0xFF00)>>8);
+      }
+    }
     break;
   case JTAG430_WRITEMEM:
   case POKE:
-    jtag430_writemem(cmddataword[0],cmddataword[1]);
+    jtag430_writemem(cmddataword[0],cmddataword[2]);
     cmddataword[0]=jtag430_readmem(cmddataword[0]);
     txdata(app,verb,2);
     break;
   case JTAG430_WRITEFLASH:
-    jtag430_writeflash(cmddataword[0],cmddataword[1]);
+    //debugstr("Poking flash memory.");
+    jtag430_writeflash(cmddataword[0],cmddataword[2]);
     cmddataword[0]=jtag430_readmem(cmddataword[0]);
     txdata(app,verb,2);
     break;
@@ -316,22 +359,16 @@ void oldjtag430handle(unsigned char app,
     jtag430_setpc(cmddataword[0]);
     txdata(app,verb,0);
     break;
+    
+  case JTAG430_COREIP_ID:
+  case JTAG430_DEVICE_ID:
+    cmddataword[0]=0;
+    cmddataword[1]=0;
+    txdata(app,verb,4);
+    break;
+    
   default:
     jtaghandle(app,verb,len);
   }
   jtag430_resettap();
 }
-
-//! Handles unique MSP430 JTAG commands.  Forwards others to JTAG.
-void jtag430handle(unsigned char app,
-		   unsigned char verb,
-		   unsigned char len){
-  switch(jtag430mode){
-  case MSP430MODE:
-    return oldjtag430handle(app,verb,len);
-  case MSP430X2MODE:
-    return jtag430x2handle(app,verb,len);
-  default:
-    txdata(app,NOK,0);
-  }
-}