X-Git-Url: http://git.rot13.org/?p=goodfet;a=blobdiff_plain;f=firmware%2Fapps%2Fradios%2Fccspi.c;h=83dfa37b4ca42d6e4a5b1ae16e7adc78a5228e8c;hp=5a3d5d67494bde6c5dfa864dc92af24b33b58eed;hb=ed8fe6653a821e893857c9491d576b8c6dee8dad;hpb=73a31780aab1bea70e6e201dad4c752a3e253536

diff --git a/firmware/apps/radios/ccspi.c b/firmware/apps/radios/ccspi.c
index 5a3d5d6..83dfa37 100644
--- a/firmware/apps/radios/ccspi.c
+++ b/firmware/apps/radios/ccspi.c
@@ -139,9 +139,8 @@ void ccspi_handle_fn( uint8_t const app,
     txdata(app,verb,0);
     break;
   case CCSPI_RX:
-    #ifdef FIFOP
-    
-     //Has there been an overflow?
+#ifdef FIFOP
+    //Has there been an overflow?
     if((!FIFO)&&FIFOP){
       debugstr("Clearing overflow");
       CLRSS;
@@ -159,23 +158,25 @@ void ccspi_handle_fn( uint8_t const app,
       ccspitrans8(CCSPI_RXFIFO | 0x40);
       //ccspitrans8(0x3F|0x40);
       cmddata[0]=0xff; //to be replaced with length
-      for(i=0;i<cmddata[0];i++)
-	cmddata[i]=ccspitrans8(0xde);
+      for(i=0;i<cmddata[0]+2;i++)
+        cmddata[i]=ccspitrans8(0xde);
       SETSS;
       
       //Flush buffer.
       CLRSS;
       ccspitrans8(0x08); //SFLUSHRX
       SETSS;
-      txdata(app,verb,i);
+      //Only should transmit length of one more than the reported
+      // length of the frame, which holds the length byte:
+      txdata(app,verb,cmddata[0]+1);
     }else{
       //No packet.
       txdata(app,verb,0);
     }
-    #else
+#else
     debugstr("Can't RX a packet with SFD and FIFOP definitions.");
     txdata(app,NOK,0);
-    #endif
+#endif
     break;
   case CCSPI_RX_FLUSH:
     //Flush the buffer.
@@ -185,12 +186,57 @@ void ccspi_handle_fn( uint8_t const app,
     
     txdata(app,verb,0);
     break;
+
   case CCSPI_REFLEX:
-    debugstr("Coming soon.");
-    txdata(app,verb,0);
+    debugstr("Beta implementation.");
+    cmddata[0] = 1;
+    txdata(app,verb,cmddata[0]+1);
+
+    while(1) {
+        //Wait until a packet is received
+        while(!SFD);
+        //Turn on LED 2 (green) as signal
+	    PLED2DIR |= PLED2PIN;
+	    PLED2OUT &= ~PLED2PIN;
+
+        //Switch the radio to TX mode
+        CLRSS;  //Drop !SS to begin transaction.
+        ccspitrans8(0x04);
+        SETSS;  //Raise !SS to end transaction.
+        //txdata(app,verb,len);
+
+        //Load the packet.
+        CLRSS;
+        ccspitrans8(CCSPI_TXFIFO);
+        char pkt[15] = {0x0f, 0x01, 0x08, 0x82, 0xff, 0xff, 0xff, 0xff, 0xde, 0xad, 0xbe, 0xef, 0xba, 0xbe, 0xc0};
+        for(i=0;i<pkt[0];i++)
+          ccspitrans8(pkt[i]);
+        SETSS;
+        debugstr("Packet loaded for tx.");
+        //Transmit the packet.
+        CLRSS;
+        ccspitrans8(0x04); //STXON
+        SETSS;
+        //Wait for the pulse on SFD, after which the packet has been sent.
+        //while(!SFD);
+        //while(SFD);
+        msdelay(300);
+        //Flush TX buffer.
+        CLRSS;
+        ccspitrans8(0x09); //SFLUSHTX
+        SETSS;
+
+        //while(SFD);
+        //msdelay(200);
+        //Turn off LED 2 (green) as signal
+	    PLED2DIR |= PLED2PIN;
+	    PLED2OUT |= PLED2PIN;
+    }
+    //TODO the firmware stops staying in this mode after a while, and stops jamming... need to find a fix!
     break;
+
   case CCSPI_TX_FLUSH:
-     //Flush the buffer.
+    //Flush the buffer.
     CLRSS;
     ccspitrans8(CCSPI_SFLUSHTX);
     SETSS;
@@ -198,8 +244,40 @@ void ccspi_handle_fn( uint8_t const app,
     txdata(app,verb,0);
     break;
   case CCSPI_TX:
+#ifdef FIFOP
+    
+    //Wait for last packet to TX.
+    //while(ccspi_status()&BIT3);
+    
+    //Load the packet.
+    CLRSS;
+    ccspitrans8(CCSPI_TXFIFO);
+    for(i=0;i<cmddata[0];i++)
+      ccspitrans8(cmddata[i]);
+    SETSS;
+    
+    //Transmit the packet.
+    CLRSS;
+    ccspitrans8(0x04); //STXON
+    SETSS;
+    
+    //Wait for the pulse on SFD, after which the packet has been sent.
+    while(!SFD);
+    while(SFD);
+    
+    //Flush TX buffer.
+    CLRSS;
+    ccspitrans8(0x09); //SFLUSHTX
+    SETSS;
+    
+    txdata(app,verb,0);
+#else
+    debugstr("Can't TX a packet with SFD and FIFOP definitions.");
+    txdata(app,NOK,0);
+#endif
+    break;
   default:
-    debugstr("Not yet supported.");
+    debugstr("Not yet supported in CCSPI");
     txdata(app,verb,0);
     break;
   }