X-Git-Url: http://git.rot13.org/?p=goodfet;a=blobdiff_plain;f=firmware%2Fapps%2Fspi%2Fspi.c;h=dd92ba2096fc41f76cac5dbf09b7107cd70dd2a6;hp=0985340ad19ef70bcd2a0ca1e170f7825c00d1a9;hb=97143fece53250662a3ffd22f141619a4902eda7;hpb=6dc88d2f1713d2bf9f2fabb5fbfb9f235a679b2f

diff --git a/firmware/apps/spi/spi.c b/firmware/apps/spi/spi.c
index 0985340..dd92ba2 100644
--- a/firmware/apps/spi/spi.c
+++ b/firmware/apps/spi/spi.c
@@ -23,13 +23,14 @@
 
 //! Set up the pins for SPI mode.
 void spisetup(){
-  P5OUT|=SS;
-  P5DIR|=MOSI+SCK+SS;
+  SETSS;
+  P5DIR|=MOSI+SCK; //BIT0 might be SS
   P5DIR&=~MISO;
+  DIRSS;
   
   //Begin a new transaction.
-  P5OUT&=~SS; 
-  P5OUT|=SS;
+  CLRSS; 
+  SETSS;
 }
 
 
@@ -62,24 +63,24 @@ unsigned char spitrans8(unsigned char byte){
 void spiflash_wrten(){
   SETSS;
   /*
-  P5OUT&=~SS; //Drop !SS to begin transaction.
+  CLRSS; //Drop !SS to begin transaction.
   spitrans8(0x04);//Write Disable
-  P5OUT|=SS;  //Raise !SS to end transaction.
+  SETSS;  //Raise !SS to end transaction.
   */
-  P5OUT&=~SS; //Drop !SS to begin transaction.
+  CLRSS; //Drop !SS to begin transaction.
   spitrans8(0x06);//Write Enable
-  P5OUT|=SS;  //Raise !SS to end transaction.
+  SETSS;  //Raise !SS to end transaction.
 }
 
 
 //! Grab the SPI flash status byte.
 unsigned char spiflash_status(){
   unsigned char c;
-  P5OUT|=SS;  //Raise !SS to end transaction.
-  P5OUT&=~SS; //Drop !SS to begin transaction.
+  SETSS;  //Raise !SS to end transaction.
+  CLRSS; //Drop !SS to begin transaction.
   spitrans8(0x05);//GET STATUS
   c=spitrans8(0xFF);
-  P5OUT|=SS;  //Raise !SS to end transaction.
+  SETSS;  //Raise !SS to end transaction.
   return c;
 }
 
@@ -123,7 +124,13 @@ void spiflash_pokeblock(unsigned long adr,
   
   SETSS;
   
-  //while(spiflash_status()&0x01);//minor performance impact
+  //if(len!=0x100)
+  //  debugstr("Non-standard block size.");
+  
+  while(spiflash_status()&0x01);//minor performance impact
+  
+  spiflash_setstatus(0x02);
+  spiflash_wrten();
   
   //Are these necessary?
   //spiflash_setstatus(0x02);
@@ -153,8 +160,6 @@ void spiflash_pokeblocks(unsigned long adr,
   long off=0;//offset of this block
   int blen;//length of this block
   SETSS;
-  spiflash_setstatus(0x02);
-  spiflash_wrten();
   
   while(off<len){
     //calculate block length
@@ -175,7 +180,7 @@ void spiflash_peek(unsigned char app,
 		   unsigned char verb,
 		   unsigned long len){
   unsigned int i;
-  P5OUT&=~SS; //Drop !SS to begin transaction.
+  CLRSS; //Drop !SS to begin transaction.
   spitrans8(0x03);//Flash Read Command
   len=3;//write 3 byte pointer
   for(i=0;i<len;i++)
@@ -188,9 +193,33 @@ void spiflash_peek(unsigned char app,
   while(len--)
     serial_tx(spitrans8(0));
   
-  P5OUT|=SS;  //Raise !SS to end transaction.
+  SETSS;  //Raise !SS to end transaction.
 }
 
+
+//! Erase a sector.
+void spiflash_erasesector(unsigned long adr){
+  //debugstr("Erasing a 4kB sector.");
+
+  //Write enable.
+  spiflash_wrten();
+
+  //Begin
+  CLRSS;
+
+  //Second command.
+  spitrans8(0x20);
+  //Send address
+  spitrans8((adr&0xFF0000)>>16);
+  spitrans8((adr&0xFF00)>>8);
+  spitrans8(adr&0xFF);
+
+  SETSS;
+  while(spiflash_status()&0x01);//while busy
+  //debugstr("Erased.");
+}
+
+
 //! Handles a monitor command.
 void spihandle(unsigned char app,
 	       unsigned char verb,
@@ -198,29 +227,29 @@ void spihandle(unsigned char app,
   unsigned long i;
   
   //Raise !SS to end transaction, just in case we forgot.
-  P5OUT|=SS;
+  SETSS;
   spisetup();
   
   switch(verb){
     //PEEK and POKE might come later.
   case READ:
   case WRITE:
-    P5OUT&=~SS; //Drop !SS to begin transaction.
+    CLRSS; //Drop !SS to begin transaction.
     for(i=0;i<len;i++)
       cmddata[i]=spitrans8(cmddata[i]);
-    P5OUT|=SS;  //Raise !SS to end transaction.
+    SETSS;  //Raise !SS to end transaction.
     txdata(app,verb,len);
     break;
 
 
   case SPI_JEDEC://Grab 3-byte JEDEC ID.
-    P5OUT&=~SS; //Drop !SS to begin transaction.
+    CLRSS; //Drop !SS to begin transaction.
     spitrans8(0x9f);
     len=3;  //Length is variable in some chips, 3 minimum.
     for(i=0;i<len;i++)
       cmddata[i]=spitrans8(cmddata[i]);
     txdata(app,verb,len);
-    P5OUT|=SS;  //Raise !SS to end transaction.
+    SETSS;  //Raise !SS to end transaction.
     break;
 
 
@@ -234,20 +263,20 @@ void spihandle(unsigned char app,
 			cmddata+4,//buf
 			len-4);//len    
     
-    txdata(app,verb,len);
+    txdata(app,verb,0);
     break;
 
 
   case SPI_ERASE://Erase the SPI Flash ROM.
     spiflash_wrten();
-    P5OUT&=~SS; //Drop !SS to begin transaction.
+    CLRSS; //Drop !SS to begin transaction.
     spitrans8(0xC7);//Chip Erase
-    P5OUT|=SS;  //Raise !SS to end transaction.
+    SETSS;  //Raise !SS to end transaction.
     
     
     while(spiflash_status()&0x01)//while busy
-      P1OUT^=1;
-    P1OUT&=~1;
+      PLEDOUT^=PLEDPIN;
+    PLEDOUT&=~PLEDPIN;
     
     txdata(app,verb,0);
     break;