X-Git-Url: http://git.rot13.org/?p=goodfet;a=blobdiff_plain;f=firmware%2Fconfig.mk;h=34f007992cfe2da1473aaaee9c17e1d9794701e1;hp=3897ab3bdc22df44d2f19edbec7089963d74aa13;hb=ebd308ba418fec3765e7b55ebcddd923111ba57b;hpb=f357e70c634e9b5221659c3b4e48d728ecbbc04f

diff --git a/firmware/config.mk b/firmware/config.mk
index 3897ab3..34f0079 100644
--- a/firmware/config.mk
+++ b/firmware/config.mk
@@ -1,27 +1,120 @@
-mcu = undef
-ifneq (,$(findstring $(board),goodfet20))
-mcu := msp430x1612
+##################################
+## These are production boards.
+##################################
+
+#Unset by default, but can be explicitly set later.
+config=undef
+
+ifneq (,$(findstring $(board),goodfet20 goodfet10 goodfet11))
+mcu ?= msp430f1612
+platform := goodfet
+endif
+
+ifneq (,$(findstring $(board),goodfet21))
+mcu ?= msp430f2618
+platform := goodfet
+endif
+
+ifneq (,$(findstring $(board),goodfet30 goodfet31))
+mcu ?= msp430f2274
+platform := goodfet
+# This will link to fit in a '2254, so unneeded packages should be omited.
+CONFIG_ccspi = n
+CONFIG_nrf = y
 endif
 
 ifneq (,$(findstring $(board),goodfet40 goodfet41))
-mcu := msp430x2618
+mcu ?= msp430f2618
+platform := goodfet
+CONFIG_nrf = y
+endif
+
+ifeq ($(board),z1)
+mcu ?= msp430f2617
+platform := z1
+config = monitor spi ccspi
+MSP430BSL?=goodfet.bsl --z1  --speed=38400
+endif
+
+ifneq (,$(findstring $(board),goodfet24))
+mcu ?= msp430f2618
+platform := goodfet
+CONFIG_glitch = y
+endif
+
+ifneq (,$(findstring $(board),nhb12b))
+mcu ?= msp430f2618
+CONFIG_nrf = y
+platform := nhb12b
+endif
+
+ifneq (,$(findstring $(board),nhb12))
+mcu ?= msp430f2618
+CONFIG_nrf = y
+platform := nhb12
 endif
 
 ifneq (,$(findstring $(board),goodfet50 goodfet51))
-mcu := msp430x5510
+mcu ?= msp430f5510
+platform := goodfet
 endif
 
-ifeq ($(mcu),undef)
-$(error Please define board)
+ifeq ($(board),telosb)
+mcu ?= msp430f1611
+platform := telosb
+config := monitor spi ccspi
+CFLAGS += -Duseuart1
+endif
+
+ifeq ($(board),telosbbt)
+mcu ?=msp430f1612
+platform := telosb
+config := monitor spi ccspi
 endif
 
-AVAILABLE_APPS = monitor spi jtag sbw jtag430 jtag430x2 i2c jtagarm7 ejtag jtagxscale openocd chipcon avr pic adc nrf ccspi glitch smartcard ps2 
 
-CONFIG_sbw         = y
+
+
+##################################
+## These are experimental boards.
+##################################
+
+ifneq (,$(findstring $(board),donbfet))
+GCC := avr-gcc
+mcu ?= atmega644p
+CFLAGS=$(DEBUG) -mmcu=$(mcu) -W -Os -mcall-prologues -Wall -Wextra -Wuninitialized -fpack-struct -fshort-enums -funsigned-bitfields
+config := monitor avr spi jscan
+endif
+
+ifneq (,$(findstring $(board),arduino))
+GCC := avr-gcc
+mcu ?= atmega168
+#BSL := avrdude -V -F -c stk500v1 -p m328p -b 57600 -P /dev/tty.usbserial-* -U flash:w:blink.hex
+LDFLAGS := 
+config := monitor
+endif
+
+ifneq (,$(findstring $(board),tilaunchpad))
+mcu ?=msp430f1612
+CFLAGS := -DDEBUG_LEVEL=3 -DDEBUG_START=1 -DINBAND_DEBUG
+CFLAGS+= -Werror -Wall
+config := monitor chipcon i2c
+endif
+
+
+
+mcu ?= undef
+ifeq ($(mcu),undef)
+$(error Please define board, as explained in the README)
+endif
+#platform := $(board)
+
+AVAILABLE_APPS = monitor spi jtag sbw jtag430 jtag430x2 i2c jtagarm7 ejtag jtagxscale openocd chipcon avr pic adc nrf ccspi glitch smartcard ps2 slc2  maxusb
 
 # defaults
 CONFIG_monitor    ?= y
 CONFIG_spi        ?= y
+CONFIG_maxusb     ?= y
 CONFIG_jtag       ?= n
 CONFIG_sbw        ?= n
 CONFIG_jtag430    ?= y
@@ -36,11 +129,13 @@ CONFIG_avr        ?= y
 CONFIG_pic        ?= n
 CONFIG_adc        ?= n
 CONFIG_nrf        ?= n
-CONFIG_ccspi      ?= y
+CONFIG_ccspi      ?= n
 CONFIG_glitch     ?= n
 CONFIG_smartcard  ?= n
 CONFIG_ps2        ?= n
+CONFIG_slc2       ?= n
 
-
-config := $(foreach app,$(AVAILABLE_APPS),$(if $(findstring $(CONFIG_$(app)),y yes t true Y YES T TRUE),$(app)))
-
+#The CONFIG_foo vars are only interpreted if $(config) is "unset".
+ifeq ($(config),undef)
+config += $(foreach app,$(AVAILABLE_APPS),$(if $(findstring $(CONFIG_$(app)),y yes t true Y YES T TRUE),$(app)))
+endif