X-Git-Url: http://git.rot13.org/?p=goodfet;a=blobdiff_plain;f=firmware%2Finclude%2Fplatform.h;h=dfc46816681d44fc1f1caaae33ae2cf440271556;hp=067d3f6a5f3512b1cfa935a73b60edf65d30f002;hb=d409b6247d7919279d453b2d73fe84e1c03f4eb5;hpb=5cbc5625c78ae7333ffcdfeac0fe3bfbfdc95311

diff --git a/firmware/include/platform.h b/firmware/include/platform.h
index 067d3f6..dfc4681 100644
--- a/firmware/include/platform.h
+++ b/firmware/include/platform.h
@@ -1,31 +1,70 @@
 /*! \file platform.h
   \author Travis Goodspeed
   \brief Port and baud rate definitions.
-  
+
   The functions specified here are defined in the platform
   definition file, such as msp430x1612.c or msp430x2618.c.
 */
 
+#ifndef __PLATFORM_H
+#define __PLATFORM_H
+
+
 #include "gfports.h"
 
-unsigned char serial_rx();
-void serial_tx(unsigned char);
+#include <stdint.h>
+
+#ifdef MSP430
+#ifdef __MSPGCC__
+#include <msp430.h>
+#else
+#include <signal.h>
+#include <msp430.h>
+#include <iomacros.h>
+#endif
+
+void msp430_init();
+void led_init();  //deprecated
+void led_on();
+void led_off();
+void led_toggle();
+#endif
+
+#include "config.h"
+
+#ifdef useuart1
+//TelosB uses second serial port.
+#define serial_tx serial1_tx
+#define serial_rx serial1_rx
+#define setbaud setbaud1
+#define msp430_init_uart msp430_init_uart1
+#else
+//Other targets use first uart.
+#define serial_tx serial0_tx
+#define serial_rx serial0_rx
+#define setbaud setbaud0
+#define msp430_init_uart msp430_init_uart0
+#endif
+
+unsigned char serial0_rx();
+void serial0_tx(unsigned char);
 
 unsigned char serial1_rx();
 void serial1_tx(unsigned char);
 
-void setbaud(unsigned char);
+void setbaud0(unsigned char);
 void setbaud1(unsigned char);
 
 //! Initialize the UART
-void msp430_init_uart();
+void msp430_init_uart0();
+//! Initialize the UART
+void msp430_init_uart1();
+
 //! Initialize the DCO Clock
 void msp430_init_dco();
 //! Called by monitor() when the DCO is correct and communication established.
 void msp430_init_dco_done();
 
-//LED on P1.0
-#define PLEDOUT P1OUT
-#define PLEDDIR P1DIR
-#define PLEDPIN BIT0
+
+#endif