X-Git-Url: http://git.rot13.org/?p=goodfet;a=blobdiff_plain;f=firmware%2Finclude%2Fspi.h;h=0f272daeabb6f0357083ea99b781a404efc39c58;hp=f5c0d8e418414a46a37fcdd772a91af4c89101c2;hb=a031b4a563978102c664466d1e91a9c3ab0553dd;hpb=6dc88d2f1713d2bf9f2fabb5fbfb9f235a679b2f;ds=sidebyside

diff --git a/firmware/include/spi.h b/firmware/include/spi.h
index f5c0d8e..0f272da 100644
--- a/firmware/include/spi.h
+++ b/firmware/include/spi.h
@@ -3,21 +3,29 @@
   \brief Definitions for the SPI application.
 */
 
+#ifndef SPI_H
+#define SPI_H
+
+#include "app.h"
+
+#define SPI 0x01
 
 //Pins and I/O
-#define SS   BIT0
 #define MOSI BIT1
 #define MISO BIT2
 #define SCK  BIT3
 
-#define SETSS P5OUT|=SS
-#define CLRSS P5OUT&=~SS
+#define SETMOSI SPIOUT|=MOSI
+#define CLRMOSI SPIOUT&=~MOSI
+#define SETCLK SPIOUT|=SCK
+#define CLRCLK SPIOUT&=~SCK
+#define READMISO (SPIIN&MISO?1:0)
 
-#define SETMOSI P5OUT|=MOSI
-#define CLRMOSI P5OUT&=~MOSI
-#define SETCLK P5OUT|=SCK
-#define CLRCLK P5OUT&=~SCK
-#define READMISO (P5IN&MISO?1:0)
+//FIXME this should be defined by the platform.
+#define SETTST P4OUT|=TST
+#define CLRTST P4OUT&=~TST
+#define SETRST P2OUT|=RST
+#define CLRRST P2OUT&=~RST
 
 //! Set up the pins for SPI mode.
 void spisetup();
@@ -35,3 +43,18 @@ void spiflash_peekblock(unsigned long adr,
 void spiflash_pokeblocks(unsigned long adr,
 			 unsigned char *buf,
 			 unsigned int len);
+
+
+//! Enable SPI writing
+void spiflash_wrten();
+
+//! Read and write an SPI byte.
+unsigned char spitrans8(unsigned char byte);
+//! Grab the SPI flash status byte.
+unsigned char spiflash_status();
+//! Erase a sector.
+void spiflash_erasesector(unsigned long adr);
+
+extern app_t const spi_app;
+
+#endif