X-Git-Url: http://git.rot13.org/?p=goodfet;a=blobdiff_plain;f=firmware%2Flib%2Fcommand.c;h=92c0b4cff606cf12d58da531eca0bac43c82994d;hp=738fab6271e306385082da670b4a643e839fdaac;hb=5b89da5a9d7864784dbe4942d856f751c3758c1c;hpb=3e4369fde16445c994da1b1efb332704aad0716d

diff --git a/firmware/lib/command.c b/firmware/lib/command.c
index 738fab6..92c0b4c 100644
--- a/firmware/lib/command.c
+++ b/firmware/lib/command.c
@@ -1,36 +1,115 @@
+/*! \file command.c
+  \author Travis Goodspeed
+  \brief These functions manage command interpretation and timing.
+*/
+
 #include "command.h"
 #include "platform.h"
 #include <string.h>
 
-//! Different command handling functions.
-
-unsigned char cmddata[256];
+unsigned char cmddata[CMDDATALEN];
+unsigned char silent=0;
 
 //! Transmit a string.
 void txstring(unsigned char app,
 	      unsigned char verb,
 	      const char *str){
-  unsigned char len=strlen(str);
-  serial_tx(app);
-  serial_tx(verb);
-  serial_tx(len);
+  unsigned long len=strlen(str);
+  txhead(app,verb,len);
   while(len--)
     serial_tx(*(str++));
 }
 
+/*! \brief Transmit a debug string.
+  
+  Transmits a debugging string that is to be printed
+  out of line by the client.  This is just for record-keeping;
+  it is not considered a proper reply to a query.
+ */
+void debugstr(const char *str){
+  txstring(0xFF,0xFF,str);
+}
+
+//! brief Debug a hex word string.
+void debughex(u16 v) {
+  debugbytes((void *)&v, 2);
+}
+
+//! brief Debug a hex word string.
+void debughex32(u32 v) {
+  debugbytes((void *)&v, 4);
+}
+
+/*! \brief Transmit debug bytes.
+  
+  Transmits bytes for debugging.
+*/
+void debugbytes(const char *bytes, unsigned int len){
+  u16 i;
+  txhead(0xFF,0xFE,len);
+  for(i=0;i<len;i++)
+    serial_tx(bytes[i]);
+}
+
+
+//! Transmit a header.
+void txhead(unsigned char app,
+	    unsigned char verb,
+	    unsigned long len){
+  serial_tx(app);
+  serial_tx(verb);
+  //serial_tx(len); //old protocol
+  txword(len);
+}
+
 //! Transmit data.
 void txdata(unsigned char app,
 	    unsigned char verb,
-	    unsigned char len){
+	    unsigned long len){
   unsigned int i=0;
-  serial_tx(app);
-  serial_tx(verb);
-  serial_tx(len);
+  if(silent)
+    return;
+  txhead(app,verb,len);
   for(i=0;i<len;i++){
     serial_tx(cmddata[i]);
   }
 }
 
+//! Receive a long.
+unsigned long rxlong(){
+  unsigned long toret=0;
+  toret=serial_rx();
+  toret|=(((long)serial_rx())<<8);
+  toret|=(((long)serial_rx())<<16);
+  toret|=(((long)serial_rx())<<24);
+  return toret;
+}
+//! Receive a word.
+unsigned int rxword(){
+  unsigned long toret=0;
+  toret=serial_rx();
+  toret|=(((long)serial_rx())<<8);
+  return toret;
+}
+//! Transmit a long.
+void txlong(unsigned long l){
+  serial_tx(l&0xFF);
+  l>>=8;
+  serial_tx(l&0xFF);
+  l>>=8;
+  serial_tx(l&0xFF);
+  l>>=8;
+  serial_tx(l&0xFF);
+  l>>=8;
+}
+//! Transmit a word.
+void txword(unsigned int l){
+  serial_tx(l&0xFF);
+  l>>=8;
+  serial_tx(l&0xFF);
+  l>>=8;
+}
+
 //Be very careful changing delay().
 //It was chosen poorly by trial and error.
 
@@ -49,3 +128,73 @@ void msdelay(unsigned int ms){
   }
   //Using TimerA might be cleaner.
 }
+
+
+/* To better satisfy the somewhat odd timing requirements for
+   PIC33F/24H/24F ICSP programming, and for better control of GoodFET
+   timing more generally, here are a few delay routines that use Timer B.
+
+   Note that I wrote these referring only to the MSP430x2xx family
+   manual. Beware on MSP430x1xx chips. Further note that, assuming
+   some minor errors will be made, I try to err on the side of
+   delaying slightly longer than requested. */
+void prep_timer()
+{
+  #ifdef MSP430
+  BCSCTL2 = 0x00; /* In particular, use DCOCLK as SMCLK source with
+		     divider 1. Hence, Timer B ticks with system
+		     clock at 16 MHz. */
+
+  TBCTL = 0x0204; /* Driven by SMCLK; disable Timer B interrupts;
+		     reset timer in case it was previously in use */
+  #else
+  #warning "Function unimplemented for this platform."
+  #endif
+}
+
+//! Delay for specified number of milliseconds (given 16 MHz clock)
+void delay_ms( unsigned int ms )
+{
+  #ifdef MSP430
+  // 16000 ticks = 1 ms
+  TBCTL |= 0x20; // Start timer!
+  while (ms--) {
+    while (TBR < 16000)
+      asm( "nop" );
+    TBCTL = 0x0224;
+  }
+  TBCTL = 0x0204; // Reset Timer B, till next time
+  #else
+  debugstr("delay_ms unimplemented");
+  #endif
+}
+
+//! Delay for specified number of microseconds (given 16 MHz clock)
+void delay_us( unsigned int us )
+{
+  #ifdef MSP430
+  // 16 ticks = 1 us
+  TBCTL |= 0x20; // Start timer!
+  while (us--) {
+    while (TBR < 16)
+      asm( "nop" );
+    TBCTL = 0x0224;
+  }
+  TBCTL = 0x0204; // Reset Timer B, till next time
+  #else
+  debugstr("delay_us unimplemented");
+  #endif
+}
+
+//! Delay for specified number of clock ticks (16 MHz clock implies 62.5 ns per tick).
+void delay_ticks( unsigned int num_ticks )
+{
+  #ifdef MSP430
+  TBCTL |= 0x20; // Start timer
+  while (TBR < num_ticks)
+    asm( "nop" );
+  TBCTL = 0x0204; // Reset Timer B, till next time
+  #else
+  debugstr("delay_ticks unimplemented");
+  #endif
+}