X-Git-Url: http://git.rot13.org/?p=goodfet;a=blobdiff_plain;f=firmware%2Flib%2Fmsp430f1612.c;h=e1d03a7e6de008205b4f42076264b80561bf89f8;hp=08e3dd889ee01dcb6b6ed4f5702e92437e5eeb37;hb=74ab06d026d20e3c13cd2bcb1ac89d83d79fbf5f;hpb=557c8df140db5df5873520c05a1415ebf7202a37

diff --git a/firmware/lib/msp430f1612.c b/firmware/lib/msp430f1612.c
index 08e3dd8..e1d03a7 100644
--- a/firmware/lib/msp430f1612.c
+++ b/firmware/lib/msp430f1612.c
@@ -18,30 +18,92 @@ unsigned char serial_rx(){
   
   return c;
 }
+
+//! Receive a byte.
+unsigned char serial1_rx(){
+  char c;
+  
+  while(!(IFG2&URXIFG1));//wait for a byte
+  c = RXBUF1;
+  IFG2&=~URXIFG1;
+  U1TCTL &= ~URXSE;
+  
+  return c;
+}
+
+
 //! Transmit a byte.
 void serial_tx(unsigned char x){
   while ((IFG1 & UTXIFG0) == 0); //loop until buffer is free
   TXBUF0 = x;
 }
 
+//! Transmit a byte on the second UART.
+void serial1_tx(unsigned char x){
+  while ((IFG2 & UTXIFG1) == 0); //loop until buffer is free
+  TXBUF1 = x;
+}
 
-void msp430_init_uart(){
+//! Set the baud rate.
+void setbaud(unsigned char rate){
   
-  /* RS232 */
+  //http://mspgcc.sourceforge.net/baudrate.html
+  switch(rate){
+  case 1://9600 baud
+    UBR00=0x7F; UBR10=0x01; UMCTL0=0x5B; /* uart0 3683400Hz 9599bps */
+    break;
+  case 2://19200 baud
+    UBR00=0xBF; UBR10=0x00; UMCTL0=0xF7; /* uart0 3683400Hz 19194bps */
+    break;
+  case 3://38400 baud
+    UBR00=0x5F; UBR10=0x00; UMCTL0=0xBF; /* uart0 3683400Hz 38408bps */
+    break;
+  case 4://57600 baud
+    UBR00=0x40; UBR10=0x00; UMCTL0=0x00; /* uart0 3683400Hz 57553bps */
+    break;
+  default:
+  case 5://115200 baud
+    UBR00=0x20; UBR10=0x00; UMCTL0=0x00; /* uart0 3683400Hz 115106bps */
+    break;
+  }
+}
+
+//! Set the baud rate of the second uart.
+void setbaud1(unsigned char rate){
+  
+  //http://mspgcc.sourceforge.net/baudrate.html
+  switch(rate){
+  case 1://9600 baud
+    UBR01=0x7F; UBR11=0x01; UMCTL1=0x5B; /* uart0 3683400Hz 9599bps */
+    break;
+  case 2://19200 baud
+    UBR01=0xBF; UBR11=0x00; UMCTL1=0xF7; /* uart0 3683400Hz 19194bps */
+    break;
+  case 3://38400 baud
+    UBR01=0x5F; UBR11=0x00; UMCTL1=0xBF; /* uart0 3683400Hz 38408bps */
+    break;
+  case 4://57600 baud
+    UBR01=0x40; UBR11=0x00; UMCTL1=0x00; /* uart0 3683400Hz 57553bps */
+    break;
+  default:
+  case 5://115200 baud
+    UBR01=0x20; UBR11=0x00; UMCTL1=0x00; /* uart0 3683400Hz 115106bps */
+    break;
+  }
+}
+
+
+void msp430_init_uart(){
   
   P3SEL |= BIT4|BIT5;                        // P3.4,5 = USART0 TXD/RXD
   P3DIR |= BIT4;
   
-  
   UCTL0 = SWRST | CHAR;                 /* 8-bit character, UART mode */
-  
-  
   UTCTL0 = SSEL1;                       /* UCLK = MCLK */
-
-  //http://mspgcc.sourceforge.net/baudrate.html
-  //9600 baud
-  UBR00=0x00; UBR10=0x01; UMCTL0=0x00;
   
+  setbaud(0);
+  
+  //Necessary for bit-banging, switch to hardware for performance.
   ME1 &= ~USPIE0;			/* USART1 SPI module disable */
   ME1 |= (UTXE0 | URXE0);               /* Enable USART1 TXD/RXD */
 
@@ -49,26 +111,47 @@ void msp430_init_uart(){
 
   /* XXX Clear pending interrupts before enable!!! */
   U0TCTL |= URXSE;
-
+  
+  
   //IE1 |= URXIE1;                        /* Enable USART1 RX interrupt  */
 }
 
 
 void msp430_init_dco() {
     /* This code taken from the FU Berlin sources and reformatted. */
-#define MSP430_CPU_SPEED 2457600UL
+  //
+
+//Works well.
+//#define MSP430_CPU_SPEED 2457600UL
+
+//Too fast for internal resistor.
+//#define MSP430_CPU_SPEED 4915200UL
+
+//Max speed.
+//#deefine MSP430_CPU_SPEED 4500000UL
+
+//baud rate speed
+#define MSP430_CPU_SPEED 3683400UL
 #define DELTA    ((MSP430_CPU_SPEED) / (32768 / 8))
   unsigned int compare, oldcapture = 0;
   unsigned int i;
   
   WDTCTL = WDTPW + WDTHOLD; //stop WDT
+  
+  
+  DCOCTL=0xF0;
+  //a4
+  //1100
 
-  BCSCTL1 = 0xa4; /* ACLK is devided by 4. RSEL=6 no division for MCLK
-		     and SSMCLK. XT2 is off. */
-
+  /* ACLK is devided by 4. RSEL=6 no division for MCLK
+     and SSMCLK. XT2 is off. */
+  //BCSCTL1 = 0xa8;
+  
   BCSCTL2 = 0x00; /* Init FLL to desired frequency using the 32762Hz
 		     crystal DCO frquenzy = 2,4576 MHz  */
-
+  
+  P1OUT|=1;
+  
   BCSCTL1 |= DIVA1 + DIVA0;             /* ACLK = LFXT1CLK/8 */
   for(i = 0xffff; i > 0; i--) {         /* Delay for XTAL to settle */
     asm("nop");
@@ -101,10 +184,12 @@ void msp430_init_dco() {
                                         /* -> Select next higher RSEL  */
     }
   }
-
+  
   CCTL2 = 0;                            /* Stop CCR2 function */
   TACTL = 0;                            /* Stop Timer_A */
 
   BCSCTL1 &= ~(DIVA1 + DIVA0);          /* remove /8 divisor from ACLK again */
+  
+  P1OUT=0;
 }