X-Git-Url: http://git.rot13.org/?p=goodfet;a=blobdiff_plain;f=firmware%2Fplatforms%2Ftelosb.h;h=213aa4bb53c84b493cdb8db0cd2613e6de0814a1;hp=26da46b1b70736d47b059a83b17a231ee658f25f;hb=6373a97ac3426c9d9966cf6a08286ecd13cc2ced;hpb=cec457aef4a1e0ff483012bc3ba0ef73ac7b6659 diff --git a/firmware/platforms/telosb.h b/firmware/platforms/telosb.h index 26da46b..213aa4b 100644 --- a/firmware/platforms/telosb.h +++ b/firmware/platforms/telosb.h @@ -9,13 +9,21 @@ */ #ifdef MSP430 -#include +#include #endif -//LED on P5.4 +//LED on P5.4 (LED1 red) #define PLEDOUT P5OUT #define PLEDDIR P5DIR #define PLEDPIN BIT4 +//LED on P5.5 (LED2 green) +#define PLED2OUT P5OUT +#define PLED2DIR P5DIR +#define PLED2PIN BIT5 +//LED on P5.6 (LED3 blue) +#define PLED3OUT P5OUT +#define PLED3DIR P5DIR +#define PLED3PIN BIT6 #define SPIOUT P3OUT @@ -45,17 +53,46 @@ P6OUT = 0x00; //Radio CS is P4.2 -//#define SETSS P4OUT|=BIT2 -//#define CLRSS P4OUT&=~BIT2 -//#define DIRSS P4DIR|=BIT2 +#define SETSS P4OUT|=BIT2 +#define CLRSS P4OUT&=~BIT2 +#define DIRSS P4DIR|=BIT2 -//Flash CS is P4.4 +//Flash CS is P4.4, redefine only for the SPI app. +#ifdef SPIAPPLICATION +#undef SETSS +#undef CLRSS +#undef DIRSS #define SETSS P4OUT|=BIT4 #define CLRSS P4OUT&=~BIT4 #define DIRSS P4DIR|=BIT4 - +#endif //CC2420 Chip Enable #define SETCE P4OUT|=BIT6 #define CLRCE P4OUT&=~BIT6 #define DIRCE P4DIR|=BIT6 + +//CC2420 signals +#define SFD (P4IN&BIT1) +#define FIFOP (P1IN&BIT0) +#define FIFO (P1IN&BIT3) + +//GPIO Expansion Pins +#define GIO0 (P2OUT&BIT0) +#define GIO0HIGH P2OUT|=BIT0 +#define GIO0LOW P2OUT&=~BIT0 +#define GIO0OUT P2OUT +#define GIO0DIR P2DIR +#define GIO0PIN BIT0 + +// network byte order converters +#define htons(x) ((((uint16_t)(x) & 0xFF00) >> 8) | \ + (((uint16_t)(x) & 0x00FF) << 8)) +#define htonl(x) ((((uint32_t)(x) & 0xFF000000) >> 24) | \ + (((uint32_t)(x) & 0x00FF0000) >> 8) | \ + (((uint32_t)(x) & 0x0000FF00) << 8) | \ + (((uint32_t)(x) & 0x000000FF) << 24)) + +#define ntohs htons +#define ntohl htonl +