Removed old configs.
authortravisutk <travisutk@12e2690d-a6be-4b82-a7b7-67c4a43b65c8>
Fri, 30 Mar 2012 19:20:16 +0000 (19:20 +0000)
committertravisutk <travisutk@12e2690d-a6be-4b82-a7b7-67c4a43b65c8>
Fri, 30 Mar 2012 19:20:16 +0000 (19:20 +0000)
git-svn-id: https://svn.code.sf.net/p/goodfet/code/trunk@1124 12e2690d-a6be-4b82-a7b7-67c4a43b65c8

firmware/config.mk
firmware/configs/README.txt [deleted file]
firmware/configs/arduino.sh [deleted file]
firmware/configs/examples/bluetooth-nhb12b.sh [deleted file]
firmware/lib/msp430f2617.c [new file with mode: 0644]

index e033aaf..4774a5a 100644 (file)
@@ -29,7 +29,7 @@ CONFIG_nrf = y
 endif
 
 ifeq ($(board),z1)
-mcu ?= msp430f2618
+mcu ?= msp430f2617
 platform := z1
 config = monitor spi ccspi
 MSP430BSL?=goodfet.bsl --z1  --speed=38400
diff --git a/firmware/configs/README.txt b/firmware/configs/README.txt
deleted file mode 100644 (file)
index 394c166..0000000
+++ /dev/null
@@ -1,3 +0,0 @@
-These are configuration scripts which may be sourced to preconfigure
-the environment for a particular hardware platform.
-
diff --git a/firmware/configs/arduino.sh b/firmware/configs/arduino.sh
deleted file mode 100644 (file)
index 0088dd3..0000000
+++ /dev/null
@@ -1,7 +0,0 @@
-export mcu=atmega168
-export GCC=avr-gcc
-export config=monitor
-export platform=arduino
-echo "Call this as 'source configs/arduino.sh'"
-echo "Assumes an 8MHz Atmega328P by default."
-echo "This port is utterly untested."
diff --git a/firmware/configs/examples/bluetooth-nhb12b.sh b/firmware/configs/examples/bluetooth-nhb12b.sh
deleted file mode 100644 (file)
index 0c52704..0000000
+++ /dev/null
@@ -1,11 +0,0 @@
-# source this, then make as usual.
-
-
-# This is for an NHB12B Next Hope Badge wired into an RN41 Bluetooth
-# module.  The DCO calibration is mandatory, and this device's chip
-# happens to use 0x8F9E.  Your chip will be different.
-
-export CFLAGS="-DSTATICDCO=0x8F9E"
-export config="monitor nrf spi"
-export mcu="msp430x2618"
-export platform="nhb12b"
diff --git a/firmware/lib/msp430f2617.c b/firmware/lib/msp430f2617.c
new file mode 100644 (file)
index 0000000..b2aa30c
--- /dev/null
@@ -0,0 +1,5 @@
+
+//platform.h will handle patching Port 5 to be Port 3.
+
+
+#include "msp430f2618.c"