From: travisutk <travisutk@12e2690d-a6be-4b82-a7b7-67c4a43b65c8>
Date: Mon, 24 Sep 2012 10:08:09 +0000 (+0000)
Subject: Cleaning apimote.
X-Git-Url: http://git.rot13.org/?p=goodfet;a=commitdiff_plain;h=ae35b67598831ec1f9b60a6261418499e12879bb;hp=24d088eef312fd62fdbe15f08affba24ce498edb

Cleaning apimote.

git-svn-id: https://svn.code.sf.net/p/goodfet/code/trunk@1267 12e2690d-a6be-4b82-a7b7-67c4a43b65c8
---

diff --git a/firmware/platforms/apimote.h b/firmware/platforms/apimote.h
deleted file mode 100644
index 63a8a0a..0000000
--- a/firmware/platforms/apimote.h
+++ /dev/null
@@ -1,93 +0,0 @@
-/*! \file apimote.h
-  \author Ryan Speers
-  \brief Port descriptions for the Apimote platform.
-*/
-
-#ifndef _GNU_ASSEMBLER_
-#include <msp430.h>
-#endif
-
-//LED on P5.5 (pin 49) (LED1 red)
-#define PLEDOUT P5OUT
-#define PLEDDIR P5DIR
-#define PLEDPIN BIT5
-//LED on P5.6 (pin 50) (LED2 green)
-#define PLED2OUT P5OUT
-#define PLED2DIR P5DIR
-#define PLED2PIN BIT6
-//LED on P5.7 (pin 51) (LED3 blue)
-#define PLED3OUT P5OUT
-#define PLED3DIR P5DIR
-#define PLED3PIN BIT7
-
-//mtx frx p34 
-//mrx ftx p35
-
-//SPI
-//TelosB:  29/3.1=RF_SI, 30/3.2=RF_SO, 31/3.3=RF_SCLK
-//ApiMote: 29/3.1=RF_SI, 30/3.2=RF_SO, 31/3.3=RF_SCLK
-#define SPIOUT P3OUT
-#define SPIDIR P3DIR
-#define SPIIN  P3IN
-#define SPIREN P3REN
-
-/* For the radio to be used:
-   2.7 (!RST) must be low
-   2.0 (VREF_EN) must be high (cc2420-41 rf_vreg)
-   3.0 (!CS) must be low for the transaction.
-*/
-
-
-
-#define INITPLATFORM \
-  P2DIR |= BIT0+BIT7; \
-  P2OUT &= ~BIT7; \
-  P2OUT |= BIT0; \
-  P3DIR |= BIT0;
-
-  /*
-  P1DIR = 0xe0;  \
-  P1OUT = 0x00;\
-  P2DIR = 0x7b;\
-  P2OUT = 0x10;\
-  P3DIR = 0xf1;\
-  P3OUT = 0x00;\
-  P4DIR = 0xfd;\
-  P4OUT = 0xFd;\
-  P5DIR = 0xff;\
-  P5OUT = 0xff;\
-  P6DIR = 0xff;\
-  P6OUT = 0x00;
-  */
-
-
-//RF Control
-//TelosB:  Radio CS is 38/P4.2 (to CC2420 pin31)
-//ApiMote: Radio CS is 28/P3.0
-#define SETSS P3OUT|=BIT0
-#define CLRSS P3OUT&=~BIT0
-#define DIRSS P3DIR|=BIT0
-
-//CC2420 Chip Enable
-//TelosB:  Radio RESETn is 42/P4.6 (to CC2420 pin21)
-//ApiMote: Radio RESETn is 27/P2.7 (to CC2420 pin21)
-#define SETCE P2OUT|=BIT7
-#define CLRCE P2OUT&=~BIT7
-#define DIRCE P2DIR|=BIT7
-
-//CC2420 signals
-#define SFD   (P2IN&BIT6) //TelosB 37/P4.1 -> ApiMote 26/P2.6
-#define FIFOP (P2IN&BIT4) //TelosB 12/P1.0 -> ApiMote 24/P2.4 (rf_pkt cc2420-29)
-#define FIFO  (P2IN&BIT3) //TelosB 15/P1.3 -> ApiMote 23/P2.3 (rf_gio0 cc2420-30)
-
-// network byte order converters
-#define htons(x) ((((uint16_t)(x) & 0xFF00) >> 8) | \
-				 (((uint16_t)(x) & 0x00FF) << 8))
-#define htonl(x) ((((uint32_t)(x) & 0xFF000000) >> 24) | \
-				  (((uint32_t)(x) & 0x00FF0000) >> 8) | \
-				  (((uint32_t)(x) & 0x0000FF00) << 8) | \
-				  (((uint32_t)(x) & 0x000000FF) << 24))
-
-#define ntohs htons
-#define ntohl htonl
-