From: theqlabs <theqlabs@12e2690d-a6be-4b82-a7b7-67c4a43b65c8>
Date: Mon, 11 Oct 2010 23:55:31 +0000 (+0000)
Subject: Added ARM Chip ID database file in /reports. Add your ARM CHIP ID MEMORY ADDRESSES
X-Git-Url: http://git.rot13.org/?p=goodfet;a=commitdiff_plain;h=c358276f31d141742a951112dc10bee4439a8b74

Added ARM Chip ID database file in /reports. Add your ARM CHIP ID MEMORY ADDRESSES

git-svn-id: https://svn.code.sf.net/p/goodfet/code/trunk@754 12e2690d-a6be-4b82-a7b7-67c4a43b65c8
---

diff --git a/client/GoodFETARM7.py b/client/GoodFETARM7.py
index cf0a1f4..0864cb2 100644
--- a/client/GoodFETARM7.py
+++ b/client/GoodFETARM7.py
@@ -10,7 +10,6 @@
 #  * set security (chip-specific)
 
 import sys, binascii, struct, time
-import atlasutils.smartprint as asp
 from GoodFET import GoodFET
 from intelhex import IntelHex
 
diff --git a/client/GoodFETAT91SAM7S.py b/client/GoodFETAT91SAM7S.py
index 3027617..8f49070 100644
--- a/client/GoodFETAT91SAM7S.py
+++ b/client/GoodFETAT91SAM7S.py
@@ -1,4 +1,5 @@
 from GoodFETARM7 import *
+
 """
 This is the ARM7 series of microcontrollers from Atmel, including:
 * AT91SAM7S512
@@ -10,14 +11,15 @@ This is the ARM7 series of microcontrollers from Atmel, including:
 * AT91SAM7S161
 * AT91SAM7S16
 
-
 SAM-BA boot-assistant can be used (not through this module) by setting PA0, PA1, and PA2 high for at least 10 seconds followed by a power cycle.  SAM-BA supports reprogramming through the DBGU port or USB port.
 
 The System Controller peripherals are all mapped to the highest 4 Kbytes of address space,
 between addresses 0xFFFF F000 and 0xFFFF FFFF.
 
 """
-
+#
+# Base Memory Addresses
+#
 FLASH_BASE =    0x100000
 TCx_BASE =      0xfffa0000      # Timer/Counter
 UDP_BASE =      0xfffb0000      # USB Device Port