goodfet
2010-12-25 travisutkRemoved some vestigal code from 'goodfet.cc reflex'.
2010-12-25 travisutkSome Chipcon devices have a resistor and capacitor...
2010-12-24 travisutkNew shellcode. Really need to move this out of the...
2010-12-24 travisutkRemoved the delay for now. Works with it, however.
2010-12-24 travisutkSubframe jamming is going strong.
2010-12-24 travisutkLittle bit better reflex.
2010-12-24 travisutkLittle bit better reflex.
2010-12-24 travisutkReflexes without debugger HALT.
2010-12-24 travisutkSaves and restores MDMCFG settings.
2010-12-24 travisutkIt works again!
2010-12-24 travisutkMore reflex jamming stuff.
2010-12-24 travisutkNew reflexframe.c
2010-12-24 travisutkReception working in reflexframe.c.
2010-12-24 travisutkReception working in reflexframe.c.
2010-12-24 travisutkBetter reflex jamming, updated Makefile.
2010-12-24 travisutkNew shell code.
2010-12-24 travisutkCarrier shell code. Unused at present.
2010-12-24 travisutkReflex frame jamming, got some troubles.
2010-12-23 travisutkNew shellcode.
2010-12-23 travisutkLots of new shellcodes. Need to document them later.
2010-12-23 travisutkMinor changes to the Chipcon interface.
2010-12-23 travisutkSupport for fixed length packets, shell code now instal...
2010-12-19 travisutkAdded 'goodfet.cc sniffdash7'.
2010-12-12 travisutkWorking Simpliciti implementation.
2010-12-11 travisutkShellcode is now only loaded when
2010-12-11 travisutkBetter reflex jamming, using shellcode on the target.
2010-12-11 travisutkFix of carrier code to handle more frequencies.
2010-12-10 travisutkChipcon packet handling is coming along, but transmissi...
2010-12-09 travisutkCC1110 packet sniffing works!
2010-12-09 travisutkPacket sniffing kinda works.
2010-12-09 travisutkCode for receiving packets.
2010-12-09 travisutkPacket reception code.
2010-12-09 travisutkAdded the HALT preprocessor directive so that these...
2010-12-09 travisutkAdded a shellcode directory for small fragments of...
2010-12-09 travisutkgoodfet.cc rssi [freq]
2010-12-09 travisutkAdded CC1110 radio strobes. Will be useful for general...
2010-12-09 travisutkI'm damned close to sniffing a Simpliciti packet by...
2010-12-08 travisutkReflex works.
2010-12-08 travisutkReflexive jamming works. Could be a lot cleaner.
2010-12-08 travisutkRemoving some debugging messages.
2010-12-07 travisutkProper shell code support for Chipcon 8051 devices.
2010-12-07 travisutkgoodfet.cc/carrier works when there's an excisting...
2010-12-07 travisutkCloser to a self contained carrier wave.
2010-12-07 travisutkCloser to a self contained carrier wave.
2010-12-07 travisutkCloser to CC1110 carrier.
2010-12-07 travisutkMore GoodFET/chipcon symbol goodness.
2010-12-07 travisutkStandardizing Chipcon interface, bringing it into line...
2010-12-06 travisutkCleaner error message for failing to print the radio...
2010-11-16 thequuxAdded basic AVR flashing support, and an associated...
2010-11-14 travisutkAdded the 'flash' verb to the goodfet.cc help.
2010-10-27 travisutkAdded ATmega644P code from C.R.
2010-10-25 dodge-thisupdates to ADIv5, ARM7, AT91x40, and the flash modules...
2010-10-18 dodge-thisnew stuff for GoodFETADIv5
2010-10-13 dodge-thisember toys not necessary here.
2010-10-13 dodge-thismyriad of arm/adi additions. working on moving past...
2010-10-11 theqlabsAdded ARM Chip ID database file in /reports. Add your...
2010-10-08 travisutkBlock fetching for the Chipcon from XDATA/CODE memory.
2010-10-08 travisutkProper block fetch.
2010-10-08 dodge-thissome fixes and additional toys for client-side
2010-10-08 dodge-thissetting up for adiv5, the latest arm debug protocols
2010-10-07 travisutkBlock reads in CC_READ_XDATA_MEMORY.
2010-10-07 travisutkBackward-compatible peekblock for Chipcon.
2010-10-07 travisutkCommented some peek/poke commands and defined a blockwi...
2010-10-06 travisutkFixed GoodFETSPI by adding optional third argument...
2010-09-29 scottlivingstonForgot to include goodfet.adc (ADC10 client) in last...
2010-09-29 scottlivingstonAdd ADC10 application for sampling analog values.
2010-09-25 scottlivingstonAdd note about another tested PIC target: PIC24FJ64GA002
2010-09-23 travisutkTimeout is now a warning, rather than an error.
2010-09-22 dodge-thiscontinuing to improve arm support with AT91X40 and...
2010-09-18 travisutkMore clocking tests, getting ready for an
2010-09-17 travisutkNearing 16-bit clock control data.
2010-09-14 travisutkGetting closer on MSP430X2 support.
2010-09-14 travisutkRetry on failed MSP430 JTAG entry.
2010-09-05 travisutkMSP430X2 corrections.
2010-09-04 dodge-thisAT91x40 series of ARM7 microcontrollers supported....
2010-09-03 dodge-thischipcon 1111 flash fixes, arm7 jtag fixes and improvements
2010-08-31 dodge-thistweak here, tie there
2010-08-30 travisutkMoving GF40 to branches.
2010-08-29 dodge-thistweak here, tie there
2010-08-28 dodge-thisreadChunk (may replace readMem) is implemented, moving...
2010-08-28 dodge-thisimplemented ARMget_registers() using ldm from user...
2010-08-28 dodge-thisARM mode set r15 fixed.
2010-08-28 dodge-thisimprovements... except now arm mode set_register for...
2010-08-22 dodge-thisomj, i can't believe i left this one out.
2010-08-22 dodge-thisreworking get/set_register() to write twice for sanity.
2010-08-19 dodge-thislatest updates including GoodFETARM.py "DEPRECATED...
2010-08-18 travisutkRemoved thickness note from GF40 schematic.
2010-08-16 travisutkSupport for SparkFun nRF24L01 Dongle.
2010-08-16 travisutkNothing important.
2010-08-15 travisutkGF40 is routed, will sleep on it and order in the morning.
2010-08-15 travisutkGF40 is routed, will sleep on it and order in the morning.
2010-08-15 travisutkRouting GF40.
2010-08-15 travisutkForking GF40 from GF23.
2010-08-13 dodge-thisx00t!
2010-08-12 dodge-thisoops. here's the new code. old code will remain in...
2010-08-12 dodge-thisw00t! jtagarm7 committed and included in build.
2010-08-11 dodge-thiscleaning up jtag, jtag430, jtag430x2, jtagarm7tdmi...
2010-08-11 dodge-thisjtagtransn reworked. testing looks good so far.
2010-08-09 dodge-thisstill working on it
2010-07-30 dodge-thisupdates.
next