#include <librfid/rfid_layer2.h>
#include <librfid/rfid_protocol.h>
+#include "rfid_reader_rc632_common.h"
+
/* FIXME */
#include "rc632.h"
return ret;
}
-static int openpcd_get_environment(
- struct rfid_reader_handle *rh,
- unsigned char num_bytes,
- unsigned char *buf)
+static int openpcd_get_environment(struct rfid_reader_handle *rh,
+ unsigned char num_bytes,
+ unsigned char *buf)
{
int ret;
return ret;
}
-static int openpcd_set_environment(
- struct rfid_reader_handle *rh,
- unsigned char num_bytes,
- const unsigned char *buf)
+static int openpcd_set_environment(struct rfid_reader_handle *rh,
+ unsigned char num_bytes,
+ const unsigned char *buf)
{
int ret;
#endif /* LIBRFID_FIRMWARE */
-static int openpcd_transceive(struct rfid_reader_handle *rh,
- enum rfid_frametype frametype,
- const unsigned char *tx_data, unsigned int tx_len,
- unsigned char *rx_data, unsigned int *rx_len,
- u_int64_t timeout, unsigned int flags)
-{
- return rh->ah->asic->priv.rc632.fn.transceive(rh->ah, frametype,
- tx_data, tx_len,
- rx_data, rx_len,
- timeout, flags);
-}
-
-static int openpcd_transceive_sf(struct rfid_reader_handle *rh,
- unsigned char cmd, struct iso14443a_atqa *atqa)
-{
- return rh->ah->asic->priv.rc632.fn.iso14443a.transceive_sf(rh->ah,
- cmd,
- atqa);
-}
-
-static int
-openpcd_transceive_acf(struct rfid_reader_handle *rh,
- struct iso14443a_anticol_cmd *cmd,
- unsigned int *bit_of_col)
-{
- return rh->ah->asic->priv.rc632.fn.iso14443a.transceive_acf(rh->ah,
- cmd, bit_of_col);
-}
-
-static int
-openpcd_iso15693_transceive_ac(struct rfid_reader_handle *rh,
- struct iso15693_anticol_cmd *acf, unsigned char uuid[ISO15693_UID_LEN],
- char *bit_of_col)
+static int openpcd_getopt(struct rfid_reader_handle *rh, int optname,
+ void *optval, unsigned int *optlen)
{
- return rh->ah->asic->priv.rc632.fn.iso15693.transceive_ac(
- rh->ah, acf, uuid, bit_of_col);
-}
-
+ int rc;
+ u_int8_t *val_u8 = (u_int8_t *) optval;
-static int
-openpcd_14443a_init(struct rfid_reader_handle *rh)
-{
- return rh->ah->asic->priv.rc632.fn.iso14443a.init(rh->ah);
-}
-
-static int
-openpcd_14443a_set_speed(struct rfid_reader_handle *rh,
- unsigned int tx,
- unsigned int speed)
-{
- u_int8_t rate;
-
- DEBUGP("setting rate: ");
- switch (speed) {
- case RFID_14443A_SPEED_106K:
- rate = 0x00;
- DEBUGPC("106K\n");
- break;
- case RFID_14443A_SPEED_212K:
- rate = 0x01;
- DEBUGPC("212K\n");
- break;
- case RFID_14443A_SPEED_424K:
- rate = 0x02;
- DEBUGPC("424K\n");
- break;
- case RFID_14443A_SPEED_848K:
- rate = 0x03;
- DEBUGPC("848K\n");
- break;
+ switch (optname) {
+#ifndef LIBRFID_FIRMWARE
+ case RFID_OPT_RDR_FW_VERSION:
+ return openpcd_get_api_version(rh, val_u8);
+#endif
default:
- return -EINVAL;
- break;
+ return _rdr_rc632_getopt(rh, optname, optval, optlen);
}
- return rh->ah->asic->priv.rc632.fn.iso14443a.set_speed(rh->ah,
- tx, rate);
-}
-
-static int
-openpcd_14443b_init(struct rfid_reader_handle *rh)
-{
- return rh->ah->asic->priv.rc632.fn.iso14443b.init(rh->ah);
-}
-
-static int
-openpcd_15693_init(struct rfid_reader_handle *rh)
-{
- return rh->ah->asic->priv.rc632.fn.iso15693.init(rh->ah);
-}
-static int
-openpcd_mifare_setkey(struct rfid_reader_handle *rh, const u_int8_t *key)
-{
- return rh->ah->asic->priv.rc632.fn.mifare_classic.setkey(rh->ah, key);
+ return 0;
}
-static int
-openpcd_mifare_auth(struct rfid_reader_handle *rh, u_int8_t cmd,
- u_int32_t serno, u_int8_t block)
-{
- return rh->ah->asic->priv.rc632.fn.mifare_classic.auth(rh->ah,
- cmd, serno, block);
-}
-
-static void
-openpcd_rf_power(struct rfid_reader_handle *rh, int on)
-{
- return rh->ah->asic->priv.rc632.fn.rf_power(rh->ah, on);
-}
static struct rfid_reader_handle *
openpcd_open(void *data)
.id = RFID_READER_OPENPCD,
.open = &openpcd_open,
.close = &openpcd_close,
- .rf_power = &openpcd_rf_power,
-
+ .getopt = &openpcd_getopt,
#ifndef LIBRFID_FIRMWARE
- .get_api_version = &openpcd_get_api_version,
- .get_environment = &openpcd_get_environment,
- .set_environment = &openpcd_set_environment,
.reset = &openpcd_reset,
#endif
-
- .transceive = &openpcd_transceive,
+ .setopt = &_rdr_rc632_setopt,
+ .init = &_rdr_rc632_l2_init,
+ .transceive = &_rdr_rc632_transceive,
.l2_supported = (1 << RFID_LAYER2_ISO14443A) |
(1 << RFID_LAYER2_ISO14443B) |
(1 << RFID_LAYER2_ISO15693),
(1 << RFID_PROTOCOL_MIFARE_UL) |
(1 << RFID_PROTOCOL_MIFARE_CLASSIC),
.iso14443a = {
- .init = &openpcd_14443a_init,
- .transceive_sf = &openpcd_transceive_sf,
- .transceive_acf = &openpcd_transceive_acf,
+ .transceive_sf = &_rdr_rc632_transceive_sf,
+ .transceive_acf = &_rdr_rc632_transceive_acf,
.speed = RFID_14443A_SPEED_106K | RFID_14443A_SPEED_212K |
RFID_14443A_SPEED_424K, //| RFID_14443A_SPEED_848K,
- .set_speed = &openpcd_14443a_set_speed,
- },
- .iso14443b = {
- .init = &openpcd_14443b_init,
+ .set_speed = &_rdr_rc632_14443a_set_speed,
},
.iso15693 = {
- .init = &openpcd_15693_init,
- .transceive_ac = &openpcd_iso15693_transceive_ac,
+ .transceive_ac = &_rdr_rc632_iso15693_transceive_ac,
},
.mifare_classic = {
- .setkey = &openpcd_mifare_setkey,
- .auth = &openpcd_mifare_auth,
+ .setkey = &_rdr_rc632_mifare_setkey,
+ .auth = &_rdr_rc632_mifare_auth,
},
};
projects / librfid / blobdiff