* (C) 2005-2008 by Harald Welte <laforge@gnumonks.org>
*
* This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2
+ * it under the terms of the GNU General Public License version 2
* as published by the Free Software Foundation
*
* This program is distributed in the hope that it will be useful,
unsigned char cmd[] = { 0x00, 0xb0, 0x00, 0x00, 0x00 };
unsigned char resp[256];
unsigned int rlen = sizeof(resp);
-
+
int rv;
rv = rfid_protocol_transceive(ph, cmd, sizeof(cmd), resp, &rlen, 0, 0);
unsigned int size_len = sizeof(size);
int sector, num_sectors;
- if (rfid_protocol_getopt(ph, RFID_OPT_PROTO_SIZE,
+ if (rfid_protocol_getopt(ph, RFID_OPT_PROTO_SIZE,
&size, &size_len) == 0) {
printf("Size: %u bytes\n", size);
} else {
if (rc < 0) {
printf("mifare auth error\n");
exit(1);
- } else
+ } else
printf("mifare auth succeeded!\n");
mifare_classic_read_sector(ph, sector);
}
}
+void
+iso15693_write(struct rfid_reader_handle *rh,int layer2,int sector,
+ unsigned char *data, unsigned int len)
+{
+ int rc;
+ unsigned char uid_buf[16];
+ unsigned int uid_len = sizeof(uid_buf);
+
+ if (rh->reader->l2_supported & (1 << layer2)) {
+ l2h = rfid_layer2_init(rh, layer2);
+ if (!l2h) {
+ printf("error during layer2(%d)_init (0=14a,1=14b,3=15)\n",layer2);
+ return;
+ }
+ printf("Layer2 init ok\n");
+ rc = rfid_layer2_open(l2h);
+ if (rc>0){
+ rfid_layer2_getopt(l2h, RFID_OPT_LAYER2_UID, &uid_buf, &uid_len);
+ printf("Layer 2 success (%s)[%d]: '%s'\n", rfid_layer2_name(l2h), uid_len, hexdump(uid_buf, uid_len));
+ rc = iso15693_write_block(l2h,sector,data,len);
+ printf("write>>rc: %d\n",rc);
+
+ }else {
+ printf("error during layer2_open\n");
+ return ;
+ }
+ rfid_layer2_close(l2h);
+ rfid_layer2_fini(l2h);
+ }
+}
+
+void iso15693_dump(struct rfid_reader_handle *rh,int layer2,int sector){
+ unsigned int size;
+ unsigned int size_len = sizeof(size);
+ unsigned char buf[1024];
+ int rc,i;
+ unsigned char uid_buf[16], block_sec;
+ unsigned int uid_len = sizeof(uid_buf);
+
+
+ if (rh->reader->l2_supported & (1 << layer2)) {
+ l2h = rfid_layer2_init(rh, layer2);
+ if (!l2h) {
+ printf("error during layer2(%d)_init (0=14a,1=14b,3=15)\n",layer2);
+ return;
+ }
+ printf("Layer2 init ok\n");
+ rc = rfid_layer2_open(l2h);
+ if (rc>0){
+ rfid_layer2_getopt(l2h, RFID_OPT_LAYER2_UID, &uid_buf, &uid_len);
+ printf("Layer 2 success (%s)[%d]: '%s'\n", rfid_layer2_name(l2h), uid_len, hexdump(uid_buf, uid_len));
+
+ if (sector < 0){
+ if (sector<=-3)
+ iso15693_select(l2h);
+ for(i=0;i<=255;i++){
+ rc = iso15693_read_block(l2h,i,buf,sizeof(buf),&block_sec);
+ if (rc>=0)
+ printf("block[%3d:%02x]sec:0x%0x data(%d): %s\n",i,i,block_sec,rc,rfid_hexdump(buf,rc));
+ else{
+ printf("no data(read_block(%d)>> %d)\n",i,rc);
+ if ((sector == -1)||(sector == -3))
+ break;
+ }
+ }
+ }else{
+ if (sector>255)
+ sector=255;
+ rc = iso15693_read_block(l2h,sector,buf,sizeof(buf));
+ if (rc>=0)
+ printf("block[%d]data(%d): %s\n",i,rc,rfid_hexdump(buf,rc));
+ else
+ printf("no data(read_block(%d)>> %d)\n",i,rc);
+ }
+ } else {
+ printf("error during layer2_open\n");
+ return ;
+ }
+ rfid_layer2_close(l2h);
+ rfid_layer2_fini(l2h);
+ }
+}
+
static char *proto_names[] = {
[RFID_PROTOCOL_TCL] = "tcl",
[RFID_PROTOCOL_MIFARE_UL] = "mifare-ultralight",
if (rc >= 3) {
printf("Protocol success (%s)\n", rfid_protocol_name(ph));
- if (rfid_protocol_getopt(ph, RFID_OPT_PROTO_SIZE,
+ if (rfid_protocol_getopt(ph, RFID_OPT_PROTO_SIZE,
&size, &size_len) == 0)
printf("Size: %u bytes\n", size);
size_len = sizeof(size);
{ "scan-loop", 0, 0, 'S' },
{ "dump", 0, 0, 'd' },
{ "enum", 0, 0, 'e' },
+ { "read", 1, 0, 'r' },
+ { "write", 1, 0, 'w'},
{ "enum-loop", 1, 0, 'E' },
{0, 0, 0, 0}
};
static void help(void)
{
printf( " -s --scan scan until first RFID tag is found\n"
- " -S --scan-loop endless scanning loop\n"
+ " -S --scan-loop endless scanning loop\n"
" -p --protocol {tcl,mifare-ultralight,mifare-classic,tagit,icode}\n"
" -l --layer2 {iso14443a,iso14443b,iso15693,icode1}\n"
" -d --dump dump rc632 registers\n"
" -e --enum enumerate all tag's in field \n"
" -E --enum-loop <delay> (ms) enumerate endless\n"
+ " -r --read <secror> read iso15693 sector \n\t\t\t(-1:0-255 stop on error, -2: 0-255 no stop)\n"
+ " -w --write <sector> write to iso15693 sector data: 01:02:03:04\n"
" -h --help\n");
}
#else /*__MINGW32__*/
program_name = basename(argv[0]);
#endif/*__MINGW32__*/
-
+
printf("%s - (C) 2005-2008 by Harald Welte\n"
"This program is Free Software and has "
"ABSOLUTELY NO WARRANTY\n\n", program_name);
while (1) {
int c, option_index = 0;
- c = getopt_long(argc, argv, "hp:l:sSdeE:", opts, &option_index);
+ c = getopt_long(argc, argv, "hp:l:sSdeE:r:w:", opts, &option_index);
if (c == -1)
break;
switch (c) {
+ case 'w':
+ //hexread(key, optarg, strlen(optarg));
+ i = strtol(optarg, NULL, 10);
+ if (reader_init() < 0)
+ exit(1);
+ layer2 = RFID_LAYER2_ISO15693;
+ iso15693_write(rh,layer2,i,"\x1\x2\x3\x4",4);
+ rfid_reader_close(rh);
+ exit(0);
+ break;
+ case 'r':
+ i = strtol(optarg, NULL, 10);
+ if (reader_init() < 0)
+ exit(1);
+ //if (layer2 < 0)
+ layer2 = RFID_LAYER2_ISO15693;
+ iso15693_dump(rh,layer2,i);
+ rfid_reader_close(rh);
+ exit(0);
+ break;
case 'E':
i = strtol(optarg, NULL, 10);
case 'p':
protocol = proto_by_name(optarg);
if (protocol < 0) {
- fprintf(stderr, "unknown protocol `%s'\n",
+ fprintf(stderr, "unknown protocol `%s'\n",
optarg);
exit(2);
}
fprintf(stderr, "you have to specify --layer2\n");
exit(2);
}
-
+
if (reader_init() < 0)
exit(1);
}
rfid_reader_close(rh);
-
+
exit(0);
}
projects / librfid / blobdiff