import of upstream 2.4.34.4 from kernel.org
[linux-2.4.git] / Documentation / networking / dgrs.txt
1     The Digi International RightSwitch SE-X (dgrs) Device Driver
2
3 This is a Linux driver for the Digi International RightSwitch SE-X
4 EISA and PCI boards.  These are 4 (EISA) or 6 (PCI) port Ethernet
5 switches and a NIC combined into a single board.  This driver can
6 be compiled into the kernel statically or as a loadable module.
7
8 There is also a companion management tool, called "xrightswitch".
9 The management tool lets you watch the performance graphically,
10 as well as set the SNMP agent IP and IPX addresses, IEEE Spanning
11 Tree, and Aging time.  These can also be set from the command line
12 when the driver is loaded.  The driver command line options are:
13
14         debug=NNN               Debug printing level
15         dma=0/1                 Disable/Enable DMA on PCI card
16         spantree=0/1            Disable/Enable IEEE spanning tree
17         hashexpire=NNN          Change address aging time (default 300 seconds)
18         ipaddr=A,B,C,D          Set SNMP agent IP address i.e. 199,86,8,221
19         iptrap=A,B,C,D          Set SNMP agent IP trap address i.e. 199,86,8,221
20         ipxnet=NNN              Set SNMP agent IPX network number
21         nicmode=0/1             Disable/Enable multiple NIC mode
22
23 There is also a tool for setting up input and output packet filters
24 on each port, called "dgrsfilt".
25
26 Both the management tool and the filtering tool are available
27 separately from the following FTP site:
28
29         ftp://ftp.dgii.com/drivers/rightswitch/linux/
30
31 When nicmode=1, the board and driver operate as 4 or 6 individual
32 NIC ports (eth0...eth5) instead of as a switch.  All switching
33 functions are disabled.  In the future, the board firmware may include
34 a routing cache when in this mode.
35
36 Copyright 1995-1996 Digi International Inc.
37
38 This software may be used and distributed according to the terms
39 of the GNU General Public License, incorporated herein by reference.
40
41 For information on purchasing a RightSwitch SE-4 or SE-6
42 board, please contact Digi's sales department at 1-612-912-3444
43 or 1-800-DIGIBRD.  Outside the U.S., please check our Web page at:
44
45         http://www.dgii.com
46
47 for sales offices worldwide.  Tech support is also available through
48 the channels listed on the Web site, although as long as I am
49 employed on networking products at Digi I will be happy to provide
50 any bug fixes that may be needed.
51
52 -Rick Richardson, rick@dgii.com