update atp870u driver to 0.78 from D-Link source
[linux-2.4.git] / drivers / scsi / fastlane.h
1 /* fastlane.h: Defines and structures for the Fastlane SCSI driver.
2  *
3  * Copyright (C) 1996 Jesper Skov (jskov@cygnus.co.uk)
4  */
5
6 #include "NCR53C9x.h"
7
8 #ifndef FASTLANE_H
9 #define FASTLANE_H
10
11 /* The controller registers can be found in the Z2 config area at these
12  * offsets:
13  */
14 #define FASTLANE_ESP_ADDR 0x1000001
15 #define FASTLANE_DMA_ADDR 0x1000041
16
17
18 /* The Fastlane DMA interface */
19 struct fastlane_dma_registers {
20         volatile unsigned char cond_reg;        /* DMA status  (ro) [0x0000] */
21 #define ctrl_reg  cond_reg                      /* DMA control (wo) [0x0000] */
22         unsigned char dmapad1[0x3f];
23         volatile unsigned char clear_strobe;    /* DMA clear   (wo) [0x0040] */
24 };
25
26
27 /* DMA status bits */
28 #define FASTLANE_DMA_MINT  0x80
29 #define FASTLANE_DMA_IACT  0x40
30 #define FASTLANE_DMA_CREQ  0x20
31
32 /* DMA control bits */
33 #define FASTLANE_DMA_FCODE 0xa0
34 #define FASTLANE_DMA_MASK  0xf3
35 #define FASTLANE_DMA_LED   0x10 /* HD led control 1 = on */
36 #define FASTLANE_DMA_WRITE 0x08 /* 1 = write */
37 #define FASTLANE_DMA_ENABLE 0x04 /* Enable DMA */
38 #define FASTLANE_DMA_EDI   0x02 /* Enable DMA IRQ ? */
39 #define FASTLANE_DMA_ESI   0x01 /* Enable SCSI IRQ */
40
41 extern int fastlane_esp_detect(struct SHT *);
42 extern int fastlane_esp_release(struct Scsi_Host *);
43 extern const char *esp_info(struct Scsi_Host *);
44 extern int esp_queue(Scsi_Cmnd *, void (*done)(Scsi_Cmnd *));
45 extern int esp_command(Scsi_Cmnd *);
46 extern int esp_abort(Scsi_Cmnd *);
47 extern int esp_reset(Scsi_Cmnd *, unsigned int);
48 extern int esp_proc_info(char *buffer, char **start, off_t offset, int length,
49                          int hostno, int inout);
50
51 #define SCSI_FASTLANE     { proc_name:          "esp-fastlane", \
52                             proc_info:          esp_proc_info, \
53                             name:               "Fastlane SCSI", \
54                             detect:             fastlane_esp_detect, \
55                             release:            fastlane_esp_release, \
56                             queuecommand:       esp_queue, \
57                             abort:              esp_abort, \
58                             reset:              esp_reset, \
59                             can_queue:          7, \
60                             this_id:            7, \
61                             sg_tablesize:       SG_ALL, \
62                             cmd_per_lun:        1, \
63                             use_clustering:     ENABLE_CLUSTERING }
64
65 #endif /* FASTLANE_H */