# # For a description of the syntax of this configuration file, # see the Configure script. # mainmenu_name "Linux/CRIS Kernel Configuration" define_bool CONFIG_UID16 y define_bool CONFIG_RWSEM_GENERIC_SPINLOCK y define_bool CONFIG_RWSEM_XCHGADD_ALGORITHM n mainmenu_option next_comment comment 'Code maturity level options' bool 'Prompt for development and/or incomplete code/drivers' CONFIG_EXPERIMENTAL endmenu mainmenu_option next_comment comment 'Loadable module support' bool 'Enable loadable module support' CONFIG_MODULES if [ "$CONFIG_MODULES" = "y" ]; then bool ' Set version information on all module symbols' CONFIG_MODVERSIONS bool ' Kernel module loader' CONFIG_KMOD fi endmenu mainmenu_option next_comment comment 'General setup' bool 'Networking support' CONFIG_NET bool 'System V IPC' CONFIG_SYSVIPC bool 'BSD Process Accounting' CONFIG_BSD_PROCESS_ACCT bool 'Sysctl support' CONFIG_SYSCTL bool 'Kernel support for ELF binaries' CONFIG_BINFMT_ELF string 'Kernel command line' CONFIG_ETRAX_CMDLINE "root=/dev/mtdblock3" bool 'Use kernel gdb debugger' CONFIG_ETRAX_KGDB bool 'Use Artpec gdb debugger' CONFIG_ETRAX_AGDB bool 'Enable ETRAX watchdog' CONFIG_ETRAX_WATCHDOG if [ "$CONFIG_ETRAX_WATCHDOG" = "y" ]; then bool ' Disable watchdog during Oops printouts' CONFIG_ETRAX_WATCHDOG_NICE_DOGGY fi bool 'Enable ETRAX interrupt debugging' CONFIG_ETRAX_DEBUG_INTERRUPT bool 'Enable ETRAX fast timer API' CONFIG_ETRAX_FAST_TIMER if [ "$CONFIG_ETRAX_FAST_TIMER" = "y" ]; then bool ' Enable fast timer logging' CONFIG_ETRAX_FAST_TIMER_LOGGING bool ' Enable fast timer debug' CONFIG_ETRAX_FAST_TIMER_DEBUG bool ' Enable fast timer sanity checks' CONFIG_ETRAX_FAST_TIMER_SANITY_CHECKS fi bool 'Enable reboot at out of memory' CONFIG_OOM_REBOOT endmenu mainmenu_option next_comment comment 'Hardware setup' choice 'Processor type' \ "Etrax-100-LX-v1 CONFIG_ETRAX100LX \ Etrax-100-LX-v2 CONFIG_ETRAX100LX_V2 \ Etrax-100-LX-for-xsim-simulator CONFIG_SVINTO_SIM" Etrax-100-LX-v1 # ETRAX 100LX v1 has a MMU "feature" requiring a low mapping if [ "$CONFIG_ETRAX100LX" = "y" ]; then define_bool CONFIG_CRIS_LOW_MAP y define_hex CONFIG_ETRAX_DRAM_VIRTUAL_BASE 60000000 else define_hex CONFIG_ETRAX_DRAM_VIRTUAL_BASE c0000000 fi int 'DRAM size (dec, in MB)' CONFIG_ETRAX_DRAM_SIZE 8 int 'Buswidth of flash in bytes' CONFIG_ETRAX_FLASH_BUSWIDTH 2 choice 'Product LED port' \ "Port-PA-LEDs CONFIG_ETRAX_PA_LEDS \ Port-PB-LEDs CONFIG_ETRAX_PB_LEDS \ Port-CSP0-LEDs CONFIG_ETRAX_CSP0_LEDS \ None CONFIG_ETRAX_NO_LEDS" Port-PA-LEDs if [ "$CONFIG_ETRAX_NO_LEDS" != "y" ]; then int ' First green LED bit' CONFIG_ETRAX_LED1G 2 int ' First red LED bit' CONFIG_ETRAX_LED1R 3 int ' Second green LED bit' CONFIG_ETRAX_LED2G 4 int ' Second red LED bit' CONFIG_ETRAX_LED2R 5 int ' Third green LED bit' CONFIG_ETRAX_LED3G 2 int ' Third red LED bit' CONFIG_ETRAX_LED3R 2 fi if [ "$CONFIG_ETRAX_CSP0_LEDS" = "y" ]; then int ' Fourth red LED bit' CONFIG_ETRAX_LED4R 2 int ' Fourth green LED bit' CONFIG_ETRAX_LED4G 2 int ' Fifth red LED bit' CONFIG_ETRAX_LED5R 2 int ' Fifth green LED bit' CONFIG_ETRAX_LED5G 2 int ' Sixth red LED bit' CONFIG_ETRAX_LED6R 2 int ' Sixth green LED bit' CONFIG_ETRAX_LED6G 2 int ' Seventh red LED bit' CONFIG_ETRAX_LED7R 2 int ' Seventh green LED bit' CONFIG_ETRAX_LED7G 2 int ' Eigth yellow LED bit' CONFIG_ETRAX_LED8Y 2 int ' Ninth yellow LED bit' CONFIG_ETRAX_LED9Y 2 int ' Tenth yellow LED bit' CONFIG_ETRAX_LED10Y 2 int ' Eleventh yellow LED bit' CONFIG_ETRAX_LED11Y 2 int ' Twelfth red LED bit' CONFIG_ETRAX_LED12R 2 fi choice 'Product debug-port' \ "Serial-0 CONFIG_ETRAX_DEBUG_PORT0 \ Serial-1 CONFIG_ETRAX_DEBUG_PORT1 \ Serial-2 CONFIG_ETRAX_DEBUG_PORT2 \ Serial-3 CONFIG_ETRAX_DEBUG_PORT3 \ disabled CONFIG_ETRAX_DEBUG_PORT_NULL" Serial-0 choice 'Product rescue-port' \ "Serial-0 CONFIG_ETRAX_RESCUE_SER0 \ Serial-1 CONFIG_ETRAX_RESCUE_SER1 \ Serial-2 CONFIG_ETRAX_RESCUE_SER2 \ Serial-3 CONFIG_ETRAX_RESCUE_SER3" Serial-0 hex 'R_WAITSTATES' CONFIG_ETRAX_DEF_R_WAITSTATES 95a6 hex 'R_BUS_CONFIG' CONFIG_ETRAX_DEF_R_BUS_CONFIG 104 bool 'SDRAM support' CONFIG_ETRAX_SDRAM if [ "$CONFIG_ETRAX_SDRAM" = "n" ]; then hex ' R_DRAM_CONFIG' CONFIG_ETRAX_DEF_R_DRAM_CONFIG 1a200040 hex ' R_DRAM_TIMING' CONFIG_ETRAX_DEF_R_DRAM_TIMING 5611 fi if [ "$CONFIG_ETRAX_SDRAM" = "y" ]; then hex ' R_SDRAM_CONFIG' CONFIG_ETRAX_DEF_R_SDRAM_CONFIG d2fa7878 hex ' R_SDRAM_TIMING' CONFIG_ETRAX_DEF_R_SDRAM_TIMING 80004801 fi hex 'R_PORT_PA_DIR' CONFIG_ETRAX_DEF_R_PORT_PA_DIR 1c hex 'R_PORT_PA_DATA' CONFIG_ETRAX_DEF_R_PORT_PA_DATA 00 hex 'R_PORT_PB_CONFIG' CONFIG_ETRAX_DEF_R_PORT_PB_CONFIG 00 hex 'R_PORT_PB_DIR' CONFIG_ETRAX_DEF_R_PORT_PB_DIR 00 hex 'R_PORT_PB_DATA' CONFIG_ETRAX_DEF_R_PORT_PB_DATA ff bool 'Software Shutdown Support' CONFIG_ETRAX_SOFT_SHUTDOWN if [ "$CONFIG_ETRAX_SOFT_SHUTDOWN" = "y" ]; then int ' Shutdown bit on port CSP0' CONFIG_ETRAX_SHUTDOWN_BIT 12 int ' Power button bit on port G' CONFIG_ETRAX_POWERBUTTON_BIT 25 fi endmenu # bring in ETRAX built-in drivers source arch/cris/drivers/Config.in # standard linux drivers source drivers/mtd/Config.in source drivers/parport/Config.in source drivers/pnp/Config.in source drivers/block/Config.in source drivers/md/Config.in source drivers/pcmcia/Config.in if [ "$CONFIG_PCMCIA" != "n" ]; then define_bool CONFIG_VIRTUAL_BUS y fi if [ "$CONFIG_NET" = "y" ]; then source net/Config.in fi source drivers/telephony/Config.in mainmenu_option next_comment comment 'ATA/IDE/MFM/RLL support' tristate 'ATA/IDE/MFM/RLL support' CONFIG_IDE if [ "$CONFIG_IDE" != "n" ]; then source drivers/ide/Config.in else define_bool CONFIG_BLK_DEV_HD n fi endmenu mainmenu_option next_comment comment 'SCSI support' tristate 'SCSI support' CONFIG_SCSI if [ "$CONFIG_SCSI" != "n" ]; then source drivers/scsi/Config.in fi endmenu source drivers/ieee1394/Config.in source drivers/message/i2o/Config.in if [ "$CONFIG_NET" = "y" ]; then mainmenu_option next_comment comment 'Network device support' bool 'Network device support' CONFIG_NETDEVICES if [ "$CONFIG_NETDEVICES" = "y" ]; then source drivers/net/Config.in if [ "$CONFIG_ATM" = "y" -o "$CONFIG_ATM" = "m" ]; then source drivers/atm/Config.in fi fi endmenu fi source net/ax25/Config.in source net/irda/Config.in mainmenu_option next_comment comment 'ISDN subsystem' if [ "$CONFIG_NET" != "n" ]; then tristate 'ISDN support' CONFIG_ISDN if [ "$CONFIG_ISDN" != "n" ]; then source drivers/isdn/Config.in fi fi endmenu mainmenu_option next_comment comment 'Old CD-ROM drivers (not SCSI, not IDE)' bool 'Support non-SCSI/IDE/ATAPI CDROM drives' CONFIG_CD_NO_IDESCSI if [ "$CONFIG_CD_NO_IDESCSI" != "n" ]; then source drivers/cdrom/Config.in fi endmenu # # input before char - char/joystick depends on it. As does USB. # source drivers/input/Config.in source drivers/char/Config.in #source drivers/misc/Config.in source drivers/media/Config.in source fs/Config.in mainmenu_option next_comment comment 'Sound' tristate 'Sound card support' CONFIG_SOUND if [ "$CONFIG_SOUND" != "n" ]; then source drivers/sound/Config.in fi endmenu source drivers/usb/Config.in mainmenu_option next_comment comment 'Kernel hacking' #bool 'Debug kmalloc/kfree' CONFIG_DEBUG_MALLOC bool 'Kernel profiling support' CONFIG_PROFILE if [ "$CONFIG_PROFILE" = "y" ]; then int ' Profile shift count' CONFIG_PROFILE_SHIFT 2 fi int 'Kernel messages buffer length shift (0 = default)' CONFIG_LOG_BUF_SHIFT 0 source crypto/Config.in source lib/Config.in endmenu