# 
# For a description of the syntax of this configuration file,
# see Documentation/kbuild/config-language.txt.
#
define_bool CONFIG_UID16 n
define_bool CONFIG_RWSEM_GENERIC_SPINLOCK n
define_bool CONFIG_RWSEM_XCHGADD_ALGORITHM y
define_bool CONFIG_GENERIC_BUST_SPINLOCK n
define_bool CONFIG_GENERIC_ISA_DMA y
define_bool CONFIG_HAVE_DEC_LOCK y

mainmenu_name "64 bit PowerPC Linux Kernel Configuration"

mainmenu_option next_comment
   comment 'Code maturity level options'
   bool 'Prompt for development and/or incomplete code/drivers' CONFIG_EXPERIMENTAL
endmenu

mainmenu_option next_comment
comment 'Platform support'
define_bool CONFIG_PPC y
define_bool CONFIG_PPC64 y
define_bool CONFIG_SERIAL_CONSOLE y

choice 'Machine Type'	\
	"pSeries       		CONFIG_PPC_PSERIES \
	 iSeries                CONFIG_PPC_ISERIES" CONFIG_PPC_PSERIES
bool 'VMX ( AltiVec ) Support' CONFIG_ALTIVEC
bool 'Symmetric multi-processing support' CONFIG_SMP
if [ "$CONFIG_SMP" = "y" ]; then
  bool '  Distribute interrupts on all CPUs by default' CONFIG_IRQ_ALL_CPUS
  int  'Maximum number of CPUs (2-32)' CONFIG_NR_CPUS 32
  if [ "$CONFIG_PPC_PSERIES" = "y" ]; then
    bool '  Hardware multithreading' CONFIG_HMT
  fi
fi
if [ "$CONFIG_PPC_ISERIES" = "y" ]; then
   define_bool CONFIG_MSCHUNKS y
else
bool 'MsChunks Physical to Absolute address translation support' CONFIG_MSCHUNKS
tristate 'Firmware flash interface' CONFIG_RTAS_FLASH
tristate 'Scanlog Dump interface' CONFIG_SCANLOG
bool 'Support for RTAS (RunTime Abstraction Services) in /proc' CONFIG_PPC_RTAS
     if [ "$CONFIG_PPC_RTAS" = "y" ]; then
	bool 'RTAS Error Inject' CONFIG_RTAS_ERRINJCT
     fi
fi

bool 'Shared kernel/user space addressing' CONFIG_SHARED_MEMORY_ADDRESSING

bool 'LPAR Configuration Data' CONFIG_LPARCFG

endmenu

mainmenu_option next_comment
comment 'Loadable module support'
bool 'Enable loadable module support' CONFIG_MODULES
if [ "$CONFIG_MODULES" = "y" ]; then
   bool '  Set version information on all module symbols' CONFIG_MODVERSIONS
   bool '  Kernel module loader' CONFIG_KMOD
fi
endmenu

mainmenu_option next_comment
comment 'General setup'

define_bool CONFIG_ISA n
define_bool CONFIG_SBUS n
define_bool CONFIG_MCA n
define_bool CONFIG_EISA n
define_bool CONFIG_PCI y
define_bool CONFIG_PCMCIA n

bool 'Networking support' CONFIG_NET
bool 'Sysctl support' CONFIG_SYSCTL
bool 'System V IPC' CONFIG_SYSVIPC
bool 'BSD Process Accounting' CONFIG_BSD_PROCESS_ACCT

# only elf supported, a.out is not -- Cort
if [ "$CONFIG_PROC_FS" = "y" ]; then
   define_bool CONFIG_KCORE_ELF y
fi

bool 'Kernel support for 64 bit ELF binaries' CONFIG_BINFMT_ELF

tristate 'Kernel support for 32 bit ELF binaries' CONFIG_BINFMT_ELF32

tristate 'Kernel support for MISC binaries' CONFIG_BINFMT_MISC

source drivers/pci/Config.in

bool 'Support for hot-pluggable devices' CONFIG_HOTPLUG

source drivers/parport/Config.in

if [ "$CONFIG_PPC_ISERIES" != "y" ]; then
   bool 'Support for VGA Console' CONFIG_VGA_CONSOLE
   bool 'Support for frame buffer devices' CONFIG_FB

   bool 'Support for Open Firmware device tree in /proc' CONFIG_PROC_DEVICETREE

   bool 'Default bootloader kernel arguments' CONFIG_CMDLINE_BOOL
   if [ "$CONFIG_CMDLINE_BOOL" = "y" ] ; then
     string 'Initial kernel command string' CONFIG_CMDLINE "console=ttyS0,9600 console=tty0 root=/dev/sda2"
   fi
fi

endmenu

source drivers/block/Config.in
source drivers/md/Config.in

if [ "$CONFIG_NET" = "y" ]; then
   source net/Config.in
fi

mainmenu_option next_comment
comment 'ATA/IDE/MFM/RLL support'

tristate 'ATA/IDE/MFM/RLL support' CONFIG_IDE

if [ "$CONFIG_IDE" != "n" ]; then
  source drivers/ide/Config.in
else
  define_bool CONFIG_BLK_DEV_HD n
fi
endmenu

mainmenu_option next_comment
comment 'SCSI support'
tristate 'SCSI support' CONFIG_SCSI
if [ "$CONFIG_SCSI" != "n" ]; then
   source drivers/scsi/Config.in
fi
endmenu

source drivers/ieee1394/Config.in

if [ "$CONFIG_NET" = "y" ]; then
   mainmenu_option next_comment
   comment 'Network device support'

   bool 'Network device support' CONFIG_NETDEVICES
   if [ "$CONFIG_NETDEVICES" = "y" ]; then
      source drivers/net/Config.in
      if [ "$CONFIG_ATM" = "y" -o "$CONFIG_ATM" = "m" ]; then
         source drivers/atm/Config.in
      fi
   fi
   endmenu
fi

source net/ax25/Config.in

mainmenu_option next_comment
comment 'ISDN subsystem'

tristate 'ISDN support' CONFIG_ISDN
if [ "$CONFIG_ISDN" != "n" ]; then
   source drivers/isdn/Config.in
fi
endmenu

mainmenu_option next_comment
comment 'Old CD-ROM drivers (not SCSI, not IDE)'

bool 'Support non-SCSI/IDE/ATAPI CDROM drives' CONFIG_CD_NO_IDESCSI
if [ "$CONFIG_CD_NO_IDESCSI" != "n" ]; then
   source drivers/cdrom/Config.in
fi
endmenu

if [ "$CONFIG_PPC_ISERIES" != "y" ]; then
mainmenu_option next_comment
comment 'Console drivers'
source drivers/video/Config.in
endmenu

source drivers/input/Config.in
fi

if [ "$CONFIG_PPC_ISERIES" = "y" ]; then
mainmenu_option next_comment
comment 'iSeries device drivers'
   dep_tristate 'iSeries Virtual Console Support' CONFIG_VIOCONS $CONFIG_PPC_ISERIES
   dep_tristate 'iSeries Virtual I/O disk support' CONFIG_VIODASD $CONFIG_PPC_ISERIES
   if [ "$CONFIG_VIODASD" = "y" -o "$CONFIG_VIODASD" = "m" ]; then
      bool 'iSeries Virtual disk IDE emulation' CONFIG_VIODASD_IDE
   fi
   dep_tristate 'iSeries Virtual I/O CD support' CONFIG_VIOCD $CONFIG_PPC_ISERIES
   if [ "$CONFIG_VIOCD" = "y" -o "$CONFIG_VIOCD" = "m" ]; then
      bool 'iSeries Virtual CD Aztech emulation' CONFIG_VIOCD_AZTECH
   fi
   dep_tristate 'iSeries Virtual Tape Support' CONFIG_VIOTAPE  $CONFIG_PPC_ISERIES
   dep_tristate 'iSeries Virtual Ethernet driver support' CONFIG_VETH $CONFIG_PPC_ISERIES
endmenu
fi

if [ "$CONFIG_VIOCONS" = "n" ]; then
   if [ "$CONFIG_VIODASD" = "n" ]; then
      if [ "$CONFIG_VIOTAPE" = "n" ]; then
         if [ "$CONFIG_VIOCD" = "n" ]; then
		    define_bool CONFIG_VIOPATH n
		 else
		    define_bool CONFIG_VIOPATH y
         fi
	  else
	     define_bool CONFIG_VIOPATH y
      fi
   else
      define_bool CONFIG_VIOPATH y
   fi
else
   define_bool CONFIG_VIOPATH y
fi

if [ "$CONFIG_VIOCD" = "y" ]; then
   define_bool CONFIG_CD_NO_IDESCSI y
fi

source drivers/char/Config.in
source fs/Config.in

if [ "$CONFIG_PPC_ISERIES" != "y" ]; then
mainmenu_option next_comment
comment 'Sound'
tristate 'Sound card support' CONFIG_SOUND
if [ "$CONFIG_SOUND" != "n" ]; then
   source drivers/sound/dmasound/Config.in
   source drivers/sound/Config.in
fi

endmenu

source drivers/media/Config.in
source drivers/usb/Config.in
fi

source lib/Config.in

source crypto/Config.in

mainmenu_option next_comment
comment 'Kernel hacking'

bool 'Magic SysRq key' CONFIG_MAGIC_SYSRQ
bool 'Include kgdb kernel debugger' CONFIG_KGDB
bool 'Include xmon kernel debugger' CONFIG_XMON
bool 'Debug memory allocations' CONFIG_DEBUG_SLAB
if [ "$CONFIG_XMON" = "y" ]; then
  define_bool CONFIG_KALLSYMS n
fi
bool 'Include PPCDBG realtime debugging' CONFIG_PPCDBG

tristate 'Linux Kernel Crash Dump (LKCD) Support' CONFIG_DUMP
if [ "$CONFIG_DUMP" = "y" -o "$CONFIG_DUMP" = "m" ]; then
   dep_bool '  LKCD RLE compression' CONFIG_DUMP_COMPRESS_RLE $CONFIG_DUMP
   dep_bool '  LKCD GZIP compression' CONFIG_DUMP_COMPRESS_GZIP $CONFIG_DUMP
fi

int 'Kernel messages buffer length shift (0 = default)' CONFIG_LOG_BUF_SHIFT 0

endmenu