#
# For a description of the syntax of this configuration file,
# see Documentation/kbuild/config-language.txt.
#
mainmenu_name "Linux/SuperH Kernel Configuration"

define_bool CONFIG_SUPERH y

define_bool CONFIG_UID16 y
define_bool CONFIG_RWSEM_GENERIC_SPINLOCK y
define_bool CONFIG_RWSEM_XCHGADD_ALGORITHM n

mainmenu_option next_comment
comment 'Code maturity level options'
bool 'Prompt for development and/or incomplete code/drivers' CONFIG_EXPERIMENTAL
endmenu

mainmenu_option next_comment
comment 'Loadable module support'
bool 'Enable loadable module support' CONFIG_MODULES
if [ "$CONFIG_MODULES" = "y" ]; then
   bool '  Set version information on all module symbols' CONFIG_MODVERSIONS
   bool '  Kernel module loader' CONFIG_KMOD
fi
endmenu

mainmenu_option next_comment
comment 'Processor type and features'
choice 'SuperH system type'					\
	"Generic		CONFIG_SH_GENERIC		\
	 SH4-202-MicroDev	CONFIG_SH_SH4202_MICRODEV	\
	 SolutionEngine		CONFIG_SH_SOLUTION_ENGINE	\
	 SolutionEngine7751	CONFIG_SH_7751_SOLUTION_ENGINE	\
	 SHMobileSolutionEngine	CONFIG_SH_MOBILE_SOLUTION_ENGINE \
	 STB1_Harp		CONFIG_SH_STB1_HARP		\
	 STB1_Overdrive		CONFIG_SH_STB1_OVERDRIVE	\
	 HP620			CONFIG_SH_HP620			\
	 HP680			CONFIG_SH_HP680			\
	 HP690			CONFIG_SH_HP690			\
	 CqREEK			CONFIG_SH_CQREEK		\
	 DMIDA			CONFIG_SH_DMIDA    		\
	 EC3104			CONFIG_SH_EC3104		\
	 Dreamcast		CONFIG_SH_DREAMCAST		\
	 CAT68701		CONFIG_SH_CAT68701		\
	 BigSur			CONFIG_SH_BIGSUR		\
	 SH2000			CONFIG_SH_SH2000		\
	 HS7729PCI		CONFIG_SH_HS7729PCI		\
	 ADX			CONFIG_SH_ADX			\
	 SecureEdge5410		CONFIG_SH_SECUREEDGE5410	\
	 KeyWest		CONFIG_SH_KEYWEST		\
	 BareCPU		CONFIG_SH_UNKNOWN" Generic

# The SH7750 RTC module is disabled in the Dreamcast and SH-Mobile SolutionEngine
if [ "$CONFIG_SH_DREAMCAST" = "y" -o \
     "$CONFIG_SH_MOBILE_SOLUTION_ENGINE" = "y" ]; then
   define_bool CONFIG_SH_RTC n
else
   define_bool CONFIG_SH_RTC y
fi

if [ "$CONFIG_SH_HP620" = "y" -o "$CONFIG_SH_HP680" = "y" -o \
     "$CONFIG_SH_HP690" = "y" ]; then
	define_bool CONFIG_SH_HP600 y
fi

choice 'Processor type' \
   "SH7300 CONFIG_CPU_SUBTYPE_SH7300 \
    SH7707 CONFIG_CPU_SUBTYPE_SH7707 \
    SH7708 CONFIG_CPU_SUBTYPE_SH7708 \
    SH7709 CONFIG_CPU_SUBTYPE_SH7709 \
    SH7750 CONFIG_CPU_SUBTYPE_SH7750 \
    SH7751R CONFIG_CPU_SUBTYPE_SH7751R \
    SH7751 CONFIG_CPU_SUBTYPE_SH7751 \
    SH4-202 CONFIG_CPU_SUBTYPE_SH4_202 \
    ST40RA/ST40STB1 CONFIG_CPU_SUBTYPE_ST40STB1 \
    ST40GX1 CONFIG_CPU_SUBTYPE_ST40GX1" SH7708
if [ "$CONFIG_CPU_SUBTYPE_SH7300" = "y" ]; then
   define_bool CONFIG_CPU_SH3 y
   define_bool CONFIG_CPU_SH4 n
fi
if [ "$CONFIG_CPU_SUBTYPE_SH7707" = "y" ]; then
   define_bool CONFIG_CPU_SH3 y
   define_bool CONFIG_CPU_SH4 n
fi
if [ "$CONFIG_CPU_SUBTYPE_SH7708" = "y" ]; then
   define_bool CONFIG_CPU_SH3 y
   define_bool CONFIG_CPU_SH4 n
fi
if [ "$CONFIG_CPU_SUBTYPE_SH7709" = "y" ]; then
   define_bool CONFIG_CPU_SH3 y
   define_bool CONFIG_CPU_SH4 n
fi
if [ "$CONFIG_CPU_SUBTYPE_SH7750" = "y" ]; then
   define_bool CONFIG_CPU_SH3 n
   define_bool CONFIG_CPU_SH4 y
fi
if [ "$CONFIG_CPU_SUBTYPE_SH7751" = "y" ]; then
   define_bool CONFIG_CPU_SH3 n
   define_bool CONFIG_CPU_SH4 y
fi
if [ "$CONFIG_CPU_SUBTYPE_SH7751R" = "y" ]; then
   define_bool CONFIG_CPU_SH3 n
   define_bool CONFIG_CPU_SH4 y
   define_bool CONFIG_CPU_SUBTYPE_SH7751 y
fi
if [ "$CONFIG_CPU_SUBTYPE_SH4_202" = "y" ]; then
   define_bool CONFIG_CPU_SH3 n
   define_bool CONFIG_CPU_SH4 y
fi
if [ "$CONFIG_CPU_SUBTYPE_SH7751R" = "y" -o \
     "$CONFIG_CPU_SUBTYPE_SH4_202" = "y" ]; then
   bool 'Use 2-way set associative caches' CONFIG_SH_CACHE_ASSOC
fi
if [ "$CONFIG_CPU_SUBTYPE_ST40STB1" = "y" ]; then
   define_bool CONFIG_CPU_SH3 n
   define_bool CONFIG_CPU_SH4 y
   define_bool CONFIG_CPU_SUBTYPE_ST40 y
fi
if [ "$CONFIG_CPU_SUBTYPE_ST40GX1" = "y" ]; then
   define_bool CONFIG_CPU_SH3 n
   define_bool CONFIG_CPU_SH4 y
   define_bool CONFIG_CPU_SUBTYPE_ST40 y
fi
bool 'Little Endian' CONFIG_CPU_LITTLE_ENDIAN
# Platform-specific memory start and size definitions
if [ "$CONFIG_SH_SOLUTION_ENGINE" = "y" ]; then
   define_hex CONFIG_MEMORY_START 0c000000
   define_hex CONFIG_MEMORY_SIZE 02000000
   define_bool CONFIG_MEMORY_SET y
fi
if [ "$CONFIG_SH_7751_SOLUTION_ENGINE" = "y" ]; then
   define_hex CONFIG_MEMORY_START 0c000000
   define_hex CONFIG_MEMORY_SIZE 04000000
   define_bool CONFIG_MEMORY_SET y
fi
if [ "$CONFIG_SH_MOBILE_SOLUTION_ENGINE" = "y" ]; then
   define_hex CONFIG_MEMORY_START 0c000000
   define_hex CONFIG_MEMORY_SIZE 04000000
   define_bool CONFIG_MEMORY_SET y
fi
if [ "$CONFIG_SH_HP600" = "y" -o "$CONFIG_SH_BIGSUR" = "y" -o \
     "$CONFIG_SH_DREAMCAST" = "y" -o "$CONFIG_SH_SH2000" = "y" -o \
     "$CONFIG_SH_KEYWEST" = "y" ]; then
   define_hex CONFIG_MEMORY_START 0c000000
   define_hex CONFIG_MEMORY_SIZE 00400000
   define_bool CONFIG_MEMORY_SET y
fi
if [ "$CONFIG_CPU_SUBTYPE_ST40" = "y" ]; then
   bool 'Memory on LMI' CONFIG_ST40_LMI_MEMORY
   if [ "$CONFIG_ST40_LMI_MEMORY" = "y" ] ; then
      define_hex CONFIG_MEMORY_START 08000000
      define_hex CONFIG_MEMORY_SIZE 00400000
      define_bool CONFIG_MEMORY_SET y
   fi
fi
if [ "$CONFIG_SH_ADX" = "y" ]; then
   define_hex CONFIG_MEMORY_START 08000000
   define_hex CONFIG_MEMORY_SIZE 00400000
   define_bool CONFIG_MEMORY_SET y
fi
if [ "$CONFIG_SH_SECUREEDGE5410" = "y" ]; then
   define_hex CONFIG_MEMORY_START 08000000
   define_hex CONFIG_MEMORY_SIZE 01000000
   define_bool CONFIG_MEMORY_SET y
fi
if [ "$CONFIG_SH_HS7729PCI" = "y" ]; then
   define_hex CONFIG_MEMORY_START 0c000000
   define_hex CONFIG_MEMORY_SIZE 04000000
   define_bool CONFIG_MEMORY_SET y
fi
# If none of the above have set memory start/size, ask the user.
if [ "$CONFIG_MEMORY_SET" != "y" ]; then
   hex 'Physical memory start address' CONFIG_MEMORY_START 08000000
   hex 'Physical memory size' CONFIG_MEMORY_SIZE 00400000
fi

hex 'Link address offset for booting' CONFIG_BOOT_LINK_OFFSET 00210000

dep_bool 'Enable OC RAM zone (experimental)' CONFIG_SCRATCH_SPACE $CONFIG_EXPERIMENTAL
bool 'DSP mode support' CONFIG_SH_DSP

if [ "$CONFIG_CPU_SUBTYPE_ST40" = "y" ]; then
   bool 'PCI emulation of on-chip peripherals' CONFIG_SH_PCI_EMULATION
   if [ "$CONFIG_SH_PCI_EMULATION" = "y" -a "$CONFIG_CPU_SUBTYPE_ST40GX1" = "y" ]; then
      bool '  USB OHCI Host Controller' CONFIG_SH_PCI_USB
   fi
fi
endmenu

if [ "$CONFIG_SH_HP690" = "y" ]; then
  define_bool CONFIG_DISCONTIGMEM y
else
  define_bool CONFIG_DISCONTIGMEM n
fi

mainmenu_option next_comment
comment 'General setup'

# Even on SuperH devices which don't have an ISA bus,
# this variable helps the PCMCIA modules handle
# IRQ requesting properly -- Greg Banks.

if [ "$CONFIG_SH_SECUREEDGE5410" = "y" ]; then
   define_bool CONFIG_ISA n
else
   define_bool CONFIG_ISA y
fi

define_bool CONFIG_EISA n
define_bool CONFIG_MCA n
define_bool CONFIG_SBUS n

bool 'Networking support' CONFIG_NET

if [ "$CONFIG_SH_GENERIC" = "y" -o "$CONFIG_SH_SOLUTION_ENGINE" = "y" -o \
     "$CONFIG_SH_UNKNOWN" = "y" -o "$CONFIG_SH_CAT68701" = "y" -o \
     "$CONFIG_SH_ADX" = "y" -o "$CONFIG_SH_HS7729PCI" = "y" ]; then
  bool 'Compact Flash Enabler support' CONFIG_CF_ENABLER
fi

if [ "$CONFIG_CF_ENABLER" = "y" ]; then
   choice 'Compact Flash Connection Area' \
	"Area5 CONFIG_CF_AREA5 \
	 Area6 CONFIG_CF_AREA6" Area6
   if [ "$CONFIG_CF_AREA5" = "y" ]; then
      define_hex CONFIG_CF_BASE_ADDR b4000000
   fi
   if [ "$CONFIG_CF_AREA6" = "y" ]; then
      define_hex CONFIG_CF_BASE_ADDR b8000000
   fi
fi

bool 'Hitachi HD64461 companion chip support' CONFIG_HD64461
if [ "$CONFIG_HD64461" = "y" ]; then
   int 'HD64461 IRQ' CONFIG_HD64461_IRQ 36
   bool 'HD64461 PCMCIA enabler' CONFIG_HD64461_ENABLER
fi

bool 'Hitachi HD64465 companion chip support' CONFIG_HD64465
if [ "$CONFIG_HD64465" = "y" ]; then
   hex 'HD64465 start address' CONFIG_HD64465_IOBASE b0000000
   int 'HD64465 IRQ' CONFIG_HD64465_IRQ 5
fi

bool 'Wakeup UBC on startup' CONFIG_UBC_WAKEUP
bool 'DMA controller (DMAC) support' CONFIG_SH_DMA
int  'Peripheral clock frequency(Hz) (0: auto detect)' CONFIG_SH_PCLK_FREQ 0 0 1000000000

bool 'Default bootloader kernel arguments' CONFIG_CMDLINE_BOOL
if [ "$CONFIG_CMDLINE_BOOL" = "y" ] ; then
  string 'Initial kernel command string' CONFIG_CMDLINE "console=ttySC1,115200"
fi

bool 'PCI support' CONFIG_PCI
if [ "$CONFIG_PCI" = "y" ]; then
  if [ "$CONFIG_SH_HS7729PCI" = "y" ]; then
     define_bool CONFIG_PCI_SD0001 y
     define_hex CONFIG_PCI_SD0001_IRQ 0
     define_hex CONFIG_PCI_SD0001_BASE b0000000
     define_bool CONFIG_SH_PCIDMA_NONCOHERENT y
  else
     define_bool CONFIG_PCI_SD0001 n
     bool 'Cache and PCI noncoherent' CONFIG_SH_PCIDMA_NONCOHERENT
  fi
fi

source drivers/pci/Config.in

bool 'Support for hot-pluggable devices' CONFIG_HOTPLUG

if [ "$CONFIG_HOTPLUG" = "y" ] ; then
   source drivers/pcmcia/Config.in
else
   define_bool CONFIG_PCMCIA n
fi

bool 'System V IPC' CONFIG_SYSVIPC
bool 'BSD Process Accounting' CONFIG_BSD_PROCESS_ACCT
bool 'Sysctl support' CONFIG_SYSCTL
if [ "$CONFIG_PROC_FS" = "y" ]; then
   choice 'Kernel core (/proc/kcore) format' \
	"ELF		CONFIG_KCORE_ELF	\
	 A.OUT		CONFIG_KCORE_AOUT" ELF
fi
bool 'Kernel support for ELF binaries' CONFIG_BINFMT_ELF
tristate 'Kernel support for MISC binaries' CONFIG_BINFMT_MISC

bool 'Select task to kill on out of memory condition' CONFIG_OOM_KILLER

source drivers/parport/Config.in

endmenu

source drivers/mtd/Config.in

source drivers/block/Config.in

source drivers/md/Config.in

if [ "$CONFIG_NET" = "y" ]; then
   source net/Config.in
fi

mainmenu_option next_comment
comment 'ATA/IDE/MFM/RLL support'

tristate 'ATA/IDE/MFM/RLL support' CONFIG_IDE

if [ "$CONFIG_IDE" != "n" ]; then
  source drivers/ide/Config.in
else
  define_bool CONFIG_BLK_DEV_HD n
fi
endmenu

mainmenu_option next_comment
comment 'SCSI support'

tristate 'SCSI support' CONFIG_SCSI

if [ "$CONFIG_SCSI" != "n" ]; then
   source drivers/scsi/Config.in
fi
endmenu

source drivers/ieee1394/Config.in

if [ "$CONFIG_NET" = "y" ]; then
   mainmenu_option next_comment
   comment 'Network device support'

   bool 'Network device support' CONFIG_NETDEVICES
   if [ "$CONFIG_NETDEVICES" = "y" ]; then
      source drivers/net/Config.in
      if [ "$CONFIG_ATM" = "y" -o "$CONFIG_ATM" = "m" ]; then
         source drivers/atm/Config.in
      fi
   fi
   endmenu
fi

mainmenu_option next_comment
comment 'Old CD-ROM drivers (not SCSI, not IDE)'

bool 'Support non-SCSI/IDE/ATAPI CDROM drives' CONFIG_CD_NO_IDESCSI
if [ "$CONFIG_CD_NO_IDESCSI" != "n" ]; then
   source drivers/cdrom/Config.in
fi
endmenu

#
# input before char - char/joystick depends on it. As does USB.
#
source drivers/input/Config.in

#if [ "$CONFIG_SH_DREAMCAST" = "y" ]; then
#   source drivers/maple/Config.in
#fi

mainmenu_option next_comment
comment 'Character devices'

bool 'Virtual terminal' CONFIG_VT
if [ "$CONFIG_VT" = "y" ]; then
   bool '  Support for console on virtual terminal' CONFIG_VT_CONSOLE
fi

tristate 'Serial (8250, 16450, 16550 or compatible) support' CONFIG_SERIAL
tristate 'Serial (SCI, SCIF) support' CONFIG_SH_SCI
if [ "$CONFIG_SERIAL" = "y" -o "$CONFIG_SH_SCI" = "y" ]; then
   bool '  Support for console on serial port' CONFIG_SERIAL_CONSOLE
fi
comment 'Unix 98 PTY support'
bool 'Unix98 PTY support' CONFIG_UNIX98_PTYS
if [ "$CONFIG_UNIX98_PTYS" = "y" ]; then
   int 'Maximum number of Unix98 PTYs in use (0-2048)' CONFIG_UNIX98_PTY_COUNT 256
fi

if [ "$CONFIG_SH_GENERIC" = "y" -o \
     "$CONFIG_SH_CAT68701" = "y" -o \
     "$CONFIG_SH_STB1_HARP" = "y" -o \
     "$CONFIG_SH_STB1_OVERDRIVE" = "y" -o \
     "$CONFIG_SH_BIGSUR" = "y" -o \
     "$CONFIG_SH_7751_SOLUTION_ENGINE" = "y" -o \
     "$CONFIG_SH_MOBILE_SOLUTION_ENGINE" = "y" -o \
     "$CONFIG_SH_SOLUTION_ENGINE" = "y" ]; then
   bool 'Heartbeat LED' CONFIG_HEARTBEAT
fi

if [ "$CONFIG_SH_DREAMCAST" = "y" -a "$CONFIG_MAPLE" != "n" ]; then
   mainmenu_option next_comment
   comment 'Maple Bus input peripherals'
   if [ "$CONFIG_INPUT" != "n" ]; then
      dep_tristate '  Maple Bus keyboard support' CONFIG_MAPLE_KEYBOARD $CONFIG_INPUT
      dep_tristate '  Maple Bus mouse support' CONFIG_MAPLE_MOUSE $CONFIG_INPUT
   else
      comment 'Input core support is required for Maple input peripherals'
   fi
   endmenu
fi

source drivers/char/joystick/Config.in

if [ "$CONFIG_PARPORT" != "n" ]; then
   dep_tristate 'Parallel printer support' CONFIG_PRINTER $CONFIG_PARPORT
   if [ "$CONFIG_PRINTER" != "n" ]; then
      bool '  Support for console on line printer' CONFIG_LP_CONSOLE
   fi
   dep_tristate 'Support for user-space parallel port device drivers' CONFIG_PPDEV $CONFIG_PARPORT
fi
bool 'PS/2 mouse (aka "auxiliary device") support' CONFIG_PSMOUSE

mainmenu_option next_comment
comment 'Watchdog Cards'
bool 'Watchdog Timer Support' CONFIG_WATCHDOG
if [ "$CONFIG_WATCHDOG" != "n" ]; then
   bool '  Disable watchdog shutdown on close' CONFIG_WATCHDOG_NOWAYOUT
   dep_tristate '  SuperH Watchdog' CONFIG_SH_WDT $CONFIG_SUPERH
fi
endmenu

tristate 'Enhanced Real Time Clock Support' CONFIG_RTC
if [ "$CONFIG_HOTPLUG" = "y" -a "$CONFIG_PCMCIA" != "n" ]; then
   source drivers/char/pcmcia/Config.in
fi
endmenu

source fs/Config.in

source drivers/media/Config.in

if [ "$CONFIG_VT" = "y" ]; then
   mainmenu_option next_comment
   comment 'Console drivers'
   bool 'VGA text console' CONFIG_VGA_CONSOLE
   bool 'Video mode selection support' CONFIG_VIDEO_SELECT
   if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
      tristate 'MDA text console (dual-headed) (EXPERIMENTAL)' CONFIG_MDA_CONSOLE
      source drivers/video/Config.in
   fi
   endmenu
fi


mainmenu_option next_comment
comment 'Sound'

tristate 'Sound card support' CONFIG_SOUND
if [ "$CONFIG_SOUND" != "n" ]; then
   source drivers/sound/Config.in
fi
endmenu

mainmenu_option next_comment
comment 'Kernel hacking'

bool 'Magic SysRq key' CONFIG_MAGIC_SYSRQ
bool 'Use LinuxSH standard BIOS' CONFIG_SH_STANDARD_BIOS
if [ "$CONFIG_SH_STANDARD_BIOS" = "y" ]; then
   bool 'Early printk support' CONFIG_SH_EARLY_PRINTK
fi
bool 'Include KGDB kernel debugger' CONFIG_SH_KGDB
if [ "$CONFIG_SH_KGDB" = "y" ]; then
   bool ' Enter KGDB on NMI' CONFIG_KGDB_NMI
   bool ' Include KGDB thread support' CONFIG_KGDB_THREAD
   bool ' Console messages through GDB' CONFIG_SH_KGDB_CONSOLE
   bool ' Allow SysRq "G" to enter KGDB?' CONFIG_KGDB_SYSRQ
   if [ "$CONFIG_KGDB_SYSRQ" != "n" ]; then
      define_bool CONFIG_MAGIC_SYSRQ y
   fi
   bool ' Include KGDB kernel asserts' CONFIG_KGDB_KERNEL_ASSERTS
   bool ' Add additional compile options' CONFIG_KGDB_MORE
   if [ "$CONFIG_KGDB_MORE" = "y" ]; then
      string ' Additional compile options' CONFIG_KGDB_OPTIONS "-O1"
   fi
   mainmenu_option next_comment
   comment '     Default KGDB port setup'
      int 'Port number (ttySCn)' CONFIG_KGDB_DEFPORT 1
      int 'Baud rate' CONFIG_KGDB_DEFBAUD 115200
      choice 'Parity' \
         "None CONFIG_KGDB_DEFPARITY_N	\
          Even CONFIG_KGDB_DEFPARITY_E	\
          Odd  CONFIG_KGDB_DEFPARITY_O"	None
      choice 'DataBits' \
         "7 CONFIG_KGDB_DEFBITS_7	\
          8 CONFIG_KGDB_DEFBITS_8"	8
   endmenu
fi

int 'Kernel messages buffer length shift (0 = default)' CONFIG_LOG_BUF_SHIFT 0

endmenu

source crypto/Config.in
source lib/Config.in