re-format Pine64 pins from pdf

diff --git a/pins/Pine64-pins.txt b/pins/Pine64-pins.txt
new file mode 100644 (file)
index 0000000..d2ab925
--- /dev/null
+++ b/pins/Pine64-pins.txt
@@ -0,0 +1,74 @@
+
+
+## Pi-2 Connector
+1      3.3V                                            2       5V
+3      PH3 (TWI1_SDA/GPIO 2/I2C1_SDA)                  4       5V
+5      PH2 (TWI1_SCK/GPIO 3/I2C1_SCL)                  6       GND
+7      PL10 (S_PWM/GPIO 4/GPCLK0)                      8       PB0 (UART_TXD/GPIO 14/UART2_TX)
+9      GND                                             10      PB1 (UART_RXD/GPIO 15/UART2_RX)
+11     PC7 (GPIO 17)                                   12      PC8 (GPIO 18)
+13     PH9 (GPIO 27)                                   14      GND
+15     PC12 (GPIO 22)                                  16      PC13 (GPIO 23)
+17     3.3V                                            18      PC14 (GPIO 24)
+19     PC0 (SPI0_MOSI/GPIO 10/SPI_MOSI)                20      GND
+21     PC1 (SPI0_MISO/GPIO  9/SPI_MISO)                22      PC15 (GPIO 25)
+23     PC2 (SPI0_CLK/GPIO 11/SPI_SCLK)                 24      PC3  (SPI_CE0/GPIO 8/SPI0_CS)
+25     GND                                             26      PH7  (SPI_CE1/GPIO 7)
+27     PL9 (TWI_SDA/ID_SD)                             28      PL8  (ID_SC/TWI_SCK)
+29     PH5 (GPIO 5)                                    30      GND
+31     PH6 (GPIO 6)                                    32      PC4  (GPIO 12)
+33     PC5 (GPIO 13)                                   34      GND
+35     PC9 (GPIO 19)                                   36      PC6  (GPIO 16)
+37     PC16 (GPIO 26)                                  38      PC10 (GPIO 20)
+39     GND                                             40      PC11 (GPIO 21)
+
+
+## Euler "e" Connector
+1      3.3V                                    2       DC IN
+3      Lithium Batt+                           4       DC IN
+5      Temp Sensor                             6       GND
+7      PL11 (IR_RX)                            8       5V
+9      GND                                     10      PH8 (SPDIF/OWA_OUT)
+11     PB3 (I2S_MCK)                           12      PB4 (I2S_SYNC)
+13     PB5 (I2S_BCK)                           14      GND
+15     PB6 (I2S_DOUT)                          16      PB7 (I2S_DIN)
+17     3.3V                                    18      PD4 (UART4_RTS)
+19     PD2 (SPI1_MOSI/UART4_TX)                20      GND
+21     PD3 (SPI1_MISO/UART4_RX)                22      PD5 (UART4_CTS)
+23     PD1 (SPI1_CLK/UART3_RX)                 24      PD0 (UART3_TX/SPI1_CS)
+25     GND                                     26      PD6
+27     PB2                                     28      PD7
+29     PB8 (UART0_TX)                          30      PB9 (UART0_RX)
+31     EAROUTP                                 32      EAROUT_N
+33     N.C.                                    34      GND
+
+
+## Exp Connector
+1      3.3V                            2       PL7 (System LED)
+3      CH_LED (Charger LED)            4       Reset Sw
+5      PW_SW (Pwr/Stb Sw)              6       GND
+7      PB8 (UART0_TX)                  8       PB9 (UART0_RX With Level Shifter)
+9      GND                             10      KeyADC
+
+## Wifi/BT Connector
+## J49
+1      GND                                     2                PG2 (WL-SDIO-D0/SDC1-D0)
+3      PG0 (SDC1-CK/WL-SDIO-CLK)               4                PG3 (WL-SDIO-D1/SDC1-D1)
+5      GND                                     6                PG4 (WL-SDIO-D2/SDC1-D2)
+7      PG1 (SDC1-CMD/WL-SDIO-CMD)              8                PG5 (WL-SDIO-D3/SDC1-D3)
+9      PL2 (S-UART-TX/WL-REG-ON)               10               X32KFOUT (CK32)
+11     PL3 (S-UART-RX/WL-WAKE-AP)              12               GND
+13     VCC-WIFI                                14               VCC-WIFI
+
+## J50
+1      PG10 (AIF3-SYNC/PCB1-SYNC/BT-PCM-SYNC)          2       PG6 (BT-UART-RX/UART1-TX)
+3      PG11 (AIF3-BCLK/PCB1-BCLK/BT-PCM-CLK)           4       PG7 (BT-UART-TX/UART1-RX)
+5      PG12 (AIF3-DOUT PCB1-DOUT/BT-PCM-DIN)           6       PG8 (BT-UART-CTS/UART1-RTS)
+7      PG13 (AIF3-DIN/PCB1-DIN/BT-PCM-DOUT)            8       PG9 (BT-UART-RTS/UART1-CTS)
+9      GND                                             10      GND
+11     PL5 (S-JTAG-CK/BT-WAKE-AP)                      12      PL4 (BT-RST-N/S-JTAG-MS)
+13     PL6 (S-JTAG-DO/AP-WAKE-BT)                      14      VCC-WIFI-IO
+15     GND                                             16      GND
+
+
+