generate all composite gadgets from raspberry pi 0

diff --git a/usb-composite-all.sh b/usb-composite-all.sh
new file mode 100755 (executable)
index 0000000..724db99
--- /dev/null
+++ b/usb-composite-all.sh
@@ -0,0 +1,70 @@
+#!/bin/bash
+# this file is from: https://github.com/ckuethe/usbarmory/wiki/USB-Gadgets
+echo "creating composite mass-storage, serial, ethernet, hid..."
+modprobe libcomposite
+
+# assumes a disk image exists here...
+FILE=/home/pi/hardpass/usbdisk.img
+mkdir -p ${FILE/img/d}
+mount -o loop,ro,offset=2048 -t vfat $FILE ${FILE/img/d}
+cd /sys/kernel/config/usb_gadget/
+
+mkdir -p g1
+cd g1
+#echo '' > UDC
+
+echo 0x1d6b > idVendor # Linux Foundation
+echo 0x0104 > idProduct # Multifunction Composite Gadget
+echo 0x0100 > bcdDevice # v1.0.0
+echo 0x0200 > bcdUSB # USB2
+
+mkdir -p strings/0x409
+echo "fedcba9876543210" > strings/0x409/serialnumber
+echo "girst" > strings/0x409/manufacturer 
+echo "Hardpass" > strings/0x409/product 
+
+N="usb0"
+mkdir -p functions/acm.$N
+mkdir -p functions/ecm.$N
+mkdir -p functions/hid.$N
+mkdir -p functions/mass_storage.$N
+
+# first byte of address must be even
+HOST="48:6f:73:74:50:43" # "HostPC"
+SELF="42:61:64:55:53:42" # "BadUSB"
+echo $HOST > functions/ecm.$N/host_addr
+echo $SELF > functions/ecm.$N/dev_addr
+
+echo 1 > functions/mass_storage.$N/stall
+echo 0 > functions/mass_storage.$N/lun.0/cdrom
+echo 0 > functions/mass_storage.$N/lun.0/ro
+echo 0 > functions/mass_storage.$N/lun.0/nofua
+echo $FILE > functions/mass_storage.$N/lun.0/file
+
+echo 1 > functions/hid.usb0/protocol
+echo 1 > functions/hid.usb0/subclass
+echo 8 > functions/hid.usb0/report_length
+echo -ne \\x05\\x01\\x09\\x06\\xa1\\x01\\x05\\x07\\x19\\xe0\\x29\\xe7\\x15\\x00\\x25\\x01\\x75\\x01\\x95\\x08\\x81\\x02\\x95\\x01\\x75\\x08\\x81\\x03\\x95\\x05\\x75\\x01\\x05\\x08\\x19\\x01\\x29\\x05\\x91\\x02\\x95\\x01\\x75\\x03\\x91\\x03\\x95\\x06\\x75\\x08\\x15\\x00\\x25\\x65\\x05\\x07\\x19\\x00\\x29\\x65\\x81\\x00\\xc0 > functions/hid.usb0/report_desc
+
+
+C=1
+mkdir -p configs/c.$C/strings/0x409
+echo "Config $C: ECM network" > configs/c.$C/strings/0x409/configuration 
+echo 250 > configs/c.$C/MaxPower 
+ln -s functions/acm.$N configs/c.$C/
+ln -s functions/ecm.$N configs/c.$C/
+ln -s functions/mass_storage.$N configs/c.$C/
+ln -s functions/hid.$N configs/c.$C/
+
+# this lists available UDC drivers
+ls /sys/class/udc > UDC
+
+#ifconfig $N 10.0.0.1 netmask 255.255.255.252 up
+#route add -net default gw 10.0.0.2
+echo "done. "
+#echo "initializing demo menu..."
+#while 1; do
+#      /home/pi/hardpass/oled/run.sh
+#done &
+echo "starting shutdown 'daemon'"
+#/home/pi/hardpass/shutdown/shutdown-button.sh &