From: Michael Neuling Date: Tue, 9 May 2006 16:33:38 +0000 (-0500) Subject: [PATCH] powerpc: whitespace cleanup in reg.h X-Git-Tag: v2.6.18-rc1~1081^2~225^2~113 X-Git-Url: http://git.rot13.org/?p=powerpc.git;a=commitdiff_plain;h=d6b89a196dfb03fdfbe3d574ab6773fe14a1d2c6 [PATCH] powerpc: whitespace cleanup in reg.h In reg.h we mostly have #define but there are a few #define around. Clean these up so we use space exclusively. Signed-off-by: Michael Neuling Signed-off-by: Paul Mackerras --- diff --git a/include/asm-powerpc/reg.h b/include/asm-powerpc/reg.h index bd467bf5cf..0257189d50 100644 --- a/include/asm-powerpc/reg.h +++ b/include/asm-powerpc/reg.h @@ -153,7 +153,7 @@ #define SPRN_DABR 0x3F5 /* Data Address Breakpoint Register */ #define DABR_TRANSLATION (1UL << 2) #define SPRN_DAR 0x013 /* Data Address Register */ -#define SPRN_DSISR 0x012 /* Data Storage Interrupt Status Register */ +#define SPRN_DSISR 0x012 /* Data Storage Interrupt Status Register */ #define DSISR_NOHPTE 0x40000000 /* no translation found */ #define DSISR_PROTFAULT 0x08000000 /* protection fault */ #define DSISR_ISSTORE 0x02000000 /* access was a store */ @@ -258,16 +258,16 @@ #define SPRN_IABR 0x3F2 /* Instruction Address Breakpoint Register */ #define SPRN_HID4 0x3F4 /* 970 HID4 */ #define SPRN_HID5 0x3F6 /* 970 HID5 */ -#define SPRN_HID6 0x3F9 /* BE HID 6 */ -#define HID6_LB (0x0F<<12) /* Concurrent Large Page Modes */ -#define HID6_DLP (1<<20) /* Disable all large page modes (4K only) */ -#define SPRN_TSC_CELL 0x399 /* Thread switch control on Cell */ -#define TSC_CELL_DEC_ENABLE_0 0x400000 /* Decrementer Interrupt */ -#define TSC_CELL_DEC_ENABLE_1 0x200000 /* Decrementer Interrupt */ -#define TSC_CELL_EE_ENABLE 0x100000 /* External Interrupt */ -#define TSC_CELL_EE_BOOST 0x080000 /* External Interrupt Boost */ -#define SPRN_TSC 0x3FD /* Thread switch control on others */ -#define SPRN_TST 0x3FC /* Thread switch timeout on others */ +#define SPRN_HID6 0x3F9 /* BE HID 6 */ +#define HID6_LB (0x0F<<12) /* Concurrent Large Page Modes */ +#define HID6_DLP (1<<20) /* Disable all large page modes (4K only) */ +#define SPRN_TSC_CELL 0x399 /* Thread switch control on Cell */ +#define TSC_CELL_DEC_ENABLE_0 0x400000 /* Decrementer Interrupt */ +#define TSC_CELL_DEC_ENABLE_1 0x200000 /* Decrementer Interrupt */ +#define TSC_CELL_EE_ENABLE 0x100000 /* External Interrupt */ +#define TSC_CELL_EE_BOOST 0x080000 /* External Interrupt Boost */ +#define SPRN_TSC 0x3FD /* Thread switch control on others */ +#define SPRN_TST 0x3FC /* Thread switch timeout on others */ #if !defined(SPRN_IAC1) && !defined(SPRN_IAC2) #define SPRN_IAC1 0x3F4 /* Instruction Address Compare 1 */ #define SPRN_IAC2 0x3F5 /* Instruction Address Compare 2 */ @@ -362,7 +362,7 @@ #endif #define SPRN_PTEHI 0x3D5 /* 981 7450 PTE HI word (S/W TLB load) */ #define SPRN_PTELO 0x3D6 /* 982 7450 PTE LO word (S/W TLB load) */ -#define SPRN_PURR 0x135 /* Processor Utilization of Resources Reg */ +#define SPRN_PURR 0x135 /* Processor Utilization of Resources Reg */ #define SPRN_PVR 0x11F /* Processor Version Register */ #define SPRN_RPA 0x3D6 /* Required Physical Address Register */ #define SPRN_SDA 0x3BF /* Sampled Data Address Register */ @@ -559,20 +559,20 @@ /* 64-bit processors */ /* XXX the prefix should be PVR_, we'll do a global sweep to fix it one day */ -#define PV_NORTHSTAR 0x0033 -#define PV_PULSAR 0x0034 -#define PV_POWER4 0x0035 -#define PV_ICESTAR 0x0036 -#define PV_SSTAR 0x0037 -#define PV_POWER4p 0x0038 +#define PV_NORTHSTAR 0x0033 +#define PV_PULSAR 0x0034 +#define PV_POWER4 0x0035 +#define PV_ICESTAR 0x0036 +#define PV_SSTAR 0x0037 +#define PV_POWER4p 0x0038 #define PV_970 0x0039 -#define PV_POWER5 0x003A +#define PV_POWER5 0x003A #define PV_POWER5p 0x003B #define PV_970FX 0x003C -#define PV_630 0x0040 -#define PV_630p 0x0041 -#define PV_970MP 0x0044 -#define PV_BE 0x0070 +#define PV_630 0x0040 +#define PV_630p 0x0041 +#define PV_970MP 0x0044 +#define PV_BE 0x0070 /* * Number of entries in the SLB. If this ever changes we should handle