David Gibson [Wed, 9 May 2007 05:20:37 +0000 (15:20 +1000)]
[POWERPC] Further fixes for the removal of 4level-fixup hack from ppc32
Commit
d1953c8888ef034b912ee33bc2ea2cce6a414402 removed the use of
4level-fixup.h for 32-bit systems under arch/powerpc. However, I
missed a few things activated on some configurations, resulting in
some warnings (at least with STRICT_MM_TYPECHECKS enabled) and build
errors in some circumstances. This fixes it.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Linas Vepstas [Tue, 8 May 2007 23:36:21 +0000 (09:36 +1000)]
[POWERPC] EEH: log all PCI-X and PCI-E AER registers
When an EEH event is detected, and after the device driver
has been notified, but before the device is reset, enable
MMIO to the adapter, and grab the contents of the PCI status
and command registers, the PCI-X status and command, and the
PCI-E capability 10 and AER registers. Pass these up to the
RTAS error log, and also printk them.
Signed-off-by: Linas Vepstas <linas@austin.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Linas Vepstas [Tue, 8 May 2007 23:35:32 +0000 (09:35 +1000)]
[POWERPC] EEH: capture and log pci state on error
If an EEH event is observed, capture PCI config space info about
the device, wrap it up and pass it to the event logger. This
pach just slots in the basic logging function. A later patch
will provide for more through data gathering.
Signed-off-by: Linas Vepstas <linas@austin.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Linas Vepstas [Tue, 8 May 2007 23:34:40 +0000 (09:34 +1000)]
[POWERPC] EEH: Split up long error msg
Make some minor adjustments to the EEH error messages.
Signed-off-by: Linas Vepstas <linas@austin.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Linas Vepstas [Tue, 8 May 2007 23:33:29 +0000 (09:33 +1000)]
[POWERPC] EEH: log error only after driver notification.
It turns out many/most versions of firmware enable MMIO when
the slto-error-detail rtas call is made (in violation of the
architecture). Thus, it would be best to call slot-error-detail
only after notifying device drivers of a freeze, as otherwise,
a variety of strange and unexpected things may happen.
Signed-off-by: Linas Vepstas <linas@austin.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Scott Wood [Tue, 8 May 2007 17:15:34 +0000 (03:15 +1000)]
[POWERPC] fsl_soc: Make mac_addr const in fs_enet_of_init().
of_get_mac_address() returns a const pointer, so the result
should be stored in a const pointer.
Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Hugh Dickins [Wed, 9 May 2007 04:38:48 +0000 (14:38 +1000)]
[POWERPC] Don't use SLAB/SLUB for PTE pages
The SLUB allocator relies on struct page fields first_page and slab,
overwritten by ptl when SPLIT_PTLOCK: so the SLUB allocator cannot then
be used for the lowest level of pagetable pages. This was obstructing
SLUB on PowerPC, which uses kmem_caches for its pagetables. So convert
its pte level to use normal gfp pages (whereas pmd, pud and 64k-page pgd
want partpages, so continue to use kmem_caches for pmd, pud and pgd).
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Benjamin Herrenschmidt [Tue, 8 May 2007 06:27:29 +0000 (16:27 +1000)]
[POWERPC] Spufs support for 64K LS mappings on 4K kernels
This adds an option to spufs when the kernel is configured for
4K page to give it the ability to use 64K pages for SPE local store
mappings.
Currently, we are optimistic and try order 4 allocations when creating
contexts. If that fails, the code will fallback to 4K automatically.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Benjamin Herrenschmidt [Tue, 8 May 2007 06:27:28 +0000 (16:27 +1000)]
[POWERPC] Add ability to 4K kernel to hash in 64K pages
This adds the ability for a kernel compiled with 4K page size
to have special slices containing 64K pages and hash the right type
of hash PTEs.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Benjamin Herrenschmidt [Tue, 8 May 2007 06:27:27 +0000 (16:27 +1000)]
[POWERPC] Introduce address space "slices"
The basic issue is to be able to do what hugetlbfs does but with
different page sizes for some other special filesystems; more
specifically, my need is:
- Huge pages
- SPE local store mappings using 64K pages on a 4K base page size
kernel on Cell
- Some special 4K segments in 64K-page kernels for mapping a dodgy
type of powerpc-specific infiniband hardware that requires 4K MMU
mappings for various reasons I won't explain here.
The main issues are:
- To maintain/keep track of the page size per "segment" (as we can
only have one page size per segment on powerpc, which are 256MB
divisions of the address space).
- To make sure special mappings stay within their allotted
"segments" (including MAP_FIXED crap)
- To make sure everybody else doesn't mmap/brk/grow_stack into a
"segment" that is used for a special mapping
Some of the necessary mechanisms to handle that were present in the
hugetlbfs code, but mostly in ways not suitable for anything else.
The patch relies on some changes to the generic get_unmapped_area()
that just got merged. It still hijacks hugetlb callbacks here or
there as the generic code hasn't been entirely cleaned up yet but
that shouldn't be a problem.
So what is a slice ? Well, I re-used the mechanism used formerly by our
hugetlbfs implementation which divides the address space in
"meta-segments" which I called "slices". The division is done using
256MB slices below 4G, and 1T slices above. Thus the address space is
divided currently into 16 "low" slices and 16 "high" slices. (Special
case: high slice 0 is the area between 4G and 1T).
Doing so simplifies significantly the tracking of segments and avoids
having to keep track of all the 256MB segments in the address space.
While I used the "concepts" of hugetlbfs, I mostly re-implemented
everything in a more generic way and "ported" hugetlbfs to it.
Slices can have an associated page size, which is encoded in the mmu
context and used by the SLB miss handler to set the segment sizes. The
hash code currently doesn't care, it has a specific check for hugepages,
though I might add a mechanism to provide per-slice hash mapping
functions in the future.
The slice code provide a pair of "generic" get_unmapped_area() (bottomup
and topdown) functions that should work with any slice size. There is
some trickiness here so I would appreciate people to have a look at the
implementation of these and let me know if I got something wrong.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Benjamin Herrenschmidt [Tue, 8 May 2007 06:27:27 +0000 (16:27 +1000)]
[POWERPC] Small fixes & cleanups in segment page size demotion
The code for demoting segments to 4K had some issues, like for example,
when using _PAGE_4K_PFN flag, the first CPU to hit it would do the
demotion, but other CPUs hitting the same page wouldn't properly flush
their SLBs if mmu_ci_restriction isn't set. There are also potential
issues with hash_preload not handling _PAGE_4K_PFN. All of these are
non issues on current hardware but might bite us in the future.
This patch thus fixes it by:
- Taking the test comparing the mm and current CPU context page
sizes to decide to flush SLBs out of the mmu_ci_restrictions test
since that can also be triggered by _PAGE_4K_PFN pages
- Due to the above being done all the time, demote_segment_4k
doesn't need update the context and flush the SLB
- demote_segment_4k can be static and doesn't need an EXPORT_SYMBOL
- Making hash_preload ignore anything that has either _PAGE_4K_PFN
or _PAGE_NO_CACHE set, thus avoiding duplication of the complicated
logic in hash_page() (and possibly making hash_preload a little bit
faster for the normal case).
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Stephen Rothwell [Tue, 8 May 2007 05:05:31 +0000 (15:05 +1000)]
[POWERPC] iSeries: Make HVC_ISERIES the default
This makes the new iSeries virtual console drivers (nvc_iseries) the
default and prevents viocons being built unless explicitly selected.
Also it makes no sense to have the console as a module.
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Stephen Rothwell [Thu, 3 May 2007 05:19:05 +0000 (15:19 +1000)]
[POWERPC] iSeries: suppress build warning in lparmap.c
lparmap.c: Assembler messages:
lparmap.c:51: Warning: ignoring changed section attributes for .text
Idea from Segher Boessenkool.
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Johannes Berg [Tue, 8 May 2007 09:25:00 +0000 (19:25 +1000)]
[POWERPC] Mark pages that don't exist as nosave
On some powerpc architectures (notably 64-bit powermac) there is a memory
hole, for example on powermacs between 2G and 4G. Since we use the flat
memory model regardless, these pages must be marked as nosave (for suspend
to disk.)
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Johannes Berg [Tue, 8 May 2007 09:23:49 +0000 (19:23 +1000)]
[POWERPC] swsusp: Introduce register_nosave_region_late
This patch introduces a new register_nosave_region_late function that
can be called from initcalls when register_nosave_region can no longer
be used because it uses bootmem.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Acked-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Paul Mackerras <paulus@samba.org>
H. Peter Anvin [Wed, 9 May 2007 03:37:02 +0000 (20:37 -0700)]
Documentation/i386/boot.txt: update and correct
In the process of rewriting the x86 setup code, I found a number of
inaccuracies and outdated recommendations in the boot protocol
documentation. Revamp to make it more up to date.
In particular, the common use of the heap actually requires (slightly)
more than 4K of heap plus stack, which is the recommended amount in
the document; currently the code compensates by being smaller than
specified, but we can't assume that will be true forever. Thus,
recommend that if we have a modern bzImage kernel, that the bootloader
maximizes the available space.
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Andrew Morton [Wed, 9 May 2007 03:27:06 +0000 (20:27 -0700)]
revert 'sched: redundant reschedule when set_user_nice() boosts a prio of a task from the "expired" array'
Revert commit
bd53f96ca54a21c07e7a0ae1886fa623d370b85f.
Con says:
This is no good, sorry. The one I saw originally was with the staircase
deadline cpu scheduler in situ and was different.
#define TASK_PREEMPTS_CURR(p, rq) \
((p)->prio < (rq)->curr->prio)
(((p)->prio < (rq)->curr->prio) && ((p)->array == (rq)->active))
This will fail to wake up a runqueue for a task that has been migrated to the
expired array of a runqueue which is otherwise idle which can happen with smp
balancing,
Cc: Dmitry Adamushko <dmitry.adamushko@gmail.com>
Cc: Con Kolivas <kernel@kolivas.org>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jean Delvare [Wed, 9 May 2007 03:27:05 +0000 (20:27 -0700)]
applesmc: Use standard sysfs names for labels
We have a standard suffix to associate a designation string to a sensor:
_label. Use it instead of _position so that libsensors will catch it.
(This isn't implemented yet, but should be soon.)
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Nicolas Boichat <nicolas@boichat.ch>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jean Delvare [Wed, 9 May 2007 03:27:04 +0000 (20:27 -0700)]
applesmc: Use the address as platform device ID
Let the applesmc device export its address to userspace. libsensors needs
this to recognize the device and give it a unique ID.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Nicolas Boichat <nicolas@boichat.ch>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Tilman Schmidt [Wed, 9 May 2007 03:27:03 +0000 (20:27 -0700)]
usb_gigaset: don't kmalloc(0)
Zero-sized allocations are pointless anyway, and the SLUB allocator
complains about them, so stop doing that.
Signed-off-by: Tilman Schmidt <tilman@imap.cc>
Signed-off-by: Hansjoerg Lipp <hjlipp@web.de>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Geert Uytterhoeven [Wed, 9 May 2007 03:27:03 +0000 (20:27 -0700)]
m68k: <asm/scatterlist.h> needs <linux/types.h>
The recent <linux/pci.h> cleanup uncovered that include/asm-m68k/scatterlist.h
needs to include <linux/types.h>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
David Howells [Wed, 9 May 2007 03:27:02 +0000 (20:27 -0700)]
FRV: Miscellaneous fixes
Miscellaneous fixes to bring FRV up to date:
(1) Copy the new syscall numbers from i386 to asm-frv/unistd.h and fill out
the syscall table in entry.S too.
(2) Mark __frv_uart0 and __frv_uart1 __pminitdata rather than __initdata so
that determine_clocks() can access them when CONFIG_PM=y.
(3) Make arch/frv/mm/elf-fdpic.c include asm/mman.h so that MAP_FIXED is
available (fixes commit
2fd3bebaad9da3b3b99c46a3389099424bf7ee35).
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
David Rientjes [Wed, 9 May 2007 03:27:01 +0000 (20:27 -0700)]
smaps: only define clear_refs for CONFIG_MMU
/proc/pid/clear_refs is only defined in the CONFIG_MMU case, so make sure we
don't have any references to clear_refs_smap() in generic procfs code.
Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Yasunori Goto [Wed, 9 May 2007 03:27:01 +0000 (20:27 -0700)]
Fix unnecesary meminit
This is to fix unnecessary __meminit definition. These are exported for
kernel modules.
I compiled on ia64/x86-64 with memory hotplug on/off.
Signed-off-by: Yasunori Goto <y-goto@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Wed, 9 May 2007 03:33:59 +0000 (20:33 -0700)]
Merge /pub/scm/linux/kernel/git/herbert/crypto-2.6
* master.kernel.org:/pub/scm/linux/kernel/git/herbert/crypto-2.6:
[CRYPTO] cryptomgr: Fix use after free
Linus Torvalds [Wed, 9 May 2007 03:32:43 +0000 (20:32 -0700)]
Merge /pub/scm/linux/kernel/git/davem/sparc-2.6
* master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6:
[SPARC64]: Optimize fault kprobe handling just like powerpc.
[SPARC]: Wire up utimensat syscall.
[SPARC64]: Fix request_irq() ignored result warnings in PCI controller code.
[SPARC64]: Kill asm-sparc64/pbm.h
[ATYFB]: Fix sparc includes.
[QLA2XXX]: Fix build on sparc.
[SPARC64]: Removal of trivial pci_controller_info uses.
[SPARC64]: Move index info pci_pbm_info.
[SPARC64]: Move {setup,teardown}_msi_irq into pci_pbm_info.
[SPARC64]: Move pci_ops into pci_pbm_info.
[SPARC64] SBUS: Error interrupt registry cleanups.
[SPARC64] PCI: Use root list of pbm's instead of pci_controller_info's
[SPARC64] PCI: Kill PROM_PCIRNG_MAX and PROM_PCIIMAP_MAX.
[SPARC64] PCI: Use common routine to fetch PBM properties.
Linus Torvalds [Wed, 9 May 2007 03:32:16 +0000 (20:32 -0700)]
Merge /pub/scm/linux/kernel/git/jejb/scsi-misc-2.6
* master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (58 commits)
[SCSI] zfcp: clear boxed flag on unit reopen.
[SCSI] zfcp: clear adapter failed flag if an fsf request times out.
[SCSI] zfcp: rework request ID management.
[SCSI] zfcp: Fix deadlock between zfcp ERP and SCSI
[SCSI] zfcp: Locking for req_no and req_seq_no
[SCSI] zfcp: print S_ID and D_ID with 3 bytes
[SCSI] ipr: Use PCI-E reset API for new ipr adapter
[SCSI] qla2xxx: Update version number to 8.01.07-k7.
[SCSI] qla2xxx: Add MSI support.
[SCSI] qla2xxx: Correct pci_set_msi() usage semantics.
[SCSI] qla2xxx: Attempt to stop firmware only if it had been previously executed.
[SCSI] qla2xxx: Honor NVRAM port-down-retry-count settings.
[SCSI] qla2xxx: Error-out during probe() if we're unable to complete HBA initialization.
[SCSI] zfcp: Stop system after memory corruption
[SCSI] mesh: cleanup variable usage in interrupt handler
[SCSI] megaraid: replace yield() with cond_resched()
[SCSI] megaraid: fix warnings when CONFIG_PROC_FS=n
[SCSI] aacraid: correct SUN products to README
[SCSI] aacraid: superfluous adapter reset for IBM 8 series ServeRAID controllers
[SCSI] aacraid: kexec fix (reset interrupt handler)
...
Linus Torvalds [Wed, 9 May 2007 03:12:30 +0000 (20:12 -0700)]
Revert "fbdev: ignore VESA modes if framebuffer is disabled"
This reverts commit
464bdd33e9baad9806c7adbd8dfc37081a55f27e.
Peter Anvin correctly points out that VESA modes have nothing to do with
frame buffers per se - they are often just regular extended text modes.
Disabling them just because we don't have frame buffer support is very
wrong.
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Antonino A. Daplas <adaplas@gmail.com>,
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Wed, 9 May 2007 03:10:00 +0000 (20:10 -0700)]
Remove suid/sgid bits on [f]truncate()
.. to match what we do on write(). This way, people who write to files
by using [f]truncate + writable mmap have the same semantics as if they
were using the write() family of system calls.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Herbert Xu [Wed, 9 May 2007 03:04:39 +0000 (13:04 +1000)]
[CRYPTO] cryptomgr: Fix use after free
By the time kthread_run returns the param may have already been freed
so writing the returned thread_struct pointer to param is wrong.
In fact, we don't need it in param anyway so this patch simply puts it
on the stack.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
David S. Miller [Wed, 9 May 2007 01:25:14 +0000 (18:25 -0700)]
[SPARC64]: Optimize fault kprobe handling just like powerpc.
And eliminate DIE_GPF while we're at it.
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 9 May 2007 00:50:14 +0000 (17:50 -0700)]
[SPARC]: Wire up utimensat syscall.
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 9 May 2007 00:23:31 +0000 (17:23 -0700)]
[SPARC64]: Fix request_irq() ignored result warnings in PCI controller code.
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 8 May 2007 07:43:56 +0000 (00:43 -0700)]
[SPARC64]: Kill asm-sparc64/pbm.h
Everything it contains can be hidden in pci_impl.h
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 8 May 2007 07:37:23 +0000 (00:37 -0700)]
[ATYFB]: Fix sparc includes.
No need to use asm/pbm.h here.
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 8 May 2007 07:36:49 +0000 (00:36 -0700)]
[QLA2XXX]: Fix build on sparc.
We now use pci_device_to_OF_node() to get properties
and of_get_property() returns const pointers.
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 8 May 2007 07:19:02 +0000 (00:19 -0700)]
[SPARC64]: Removal of trivial pci_controller_info uses.
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 8 May 2007 06:49:01 +0000 (23:49 -0700)]
[SPARC64]: Move index info pci_pbm_info.
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 8 May 2007 06:28:50 +0000 (23:28 -0700)]
[SPARC64]: Move {setup,teardown}_msi_irq into pci_pbm_info.
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 8 May 2007 06:24:05 +0000 (23:24 -0700)]
[SPARC64]: Move pci_ops into pci_pbm_info.
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 8 May 2007 06:08:39 +0000 (23:08 -0700)]
[SPARC64] SBUS: Error interrupt registry cleanups.
Do not use IRQF_SHARED, these interrupt numbers should all
be unique.
Also use name strings without spaces in them just like
PCI controller drivers do, for consistency.
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 8 May 2007 06:06:27 +0000 (23:06 -0700)]
[SPARC64] PCI: Use root list of pbm's instead of pci_controller_info's
The idea is to move more and more things into the pbm,
with the eventual goal of eliminating the pci_controller_info
entirely as there really isn't any need for it.
This stage of the transformations requires some reworking of
the PCI error interrupt handling.
It might be tricky to get rid of the pci_controller_info parenting for
a few reasons:
1) When we get an uncorrectable or correctable error we want
to interrogate the IOMMU and streaming cache of both
PBMs for error status. These errors come from the UPA
front-end which is shared between the two PBM PCI bus
segments.
Historically speaking this is why I choose the datastructure
hierarchy of pci_controller_info-->pci_pbm_info
2) The probing does a portid/devhandle match to look for the
'other' pbm, but this is entirely an artifact and can be
eliminated trivially.
What we could do to solve #1 is to have a "buddy" pointer from one pbm
to another.
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 8 May 2007 04:54:28 +0000 (21:54 -0700)]
[SPARC64] PCI: Kill PROM_PCIRNG_MAX and PROM_PCIIMAP_MAX.
They are totally unused.
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 8 May 2007 04:51:41 +0000 (21:51 -0700)]
[SPARC64] PCI: Use common routine to fetch PBM properties.
Namely bus-range and ino-bitmap.
This allows us also to eliminate pci_controller_info's
pci_{first,last}_busno fields as only the pbm ones are
used now.
Signed-off-by: David S. Miller <davem@davemloft.net>
Pierre Ossman [Tue, 8 May 2007 20:35:17 +0000 (22:35 +0200)]
mmc: use lock instead of claim in debug check
As mmc_detect_change() can be called from irq context, using
claim (which can sleep) is inherently unsafe. Use the host
spinlock instead, which also is faster.
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
Jan Engelhardt [Tue, 8 May 2007 20:30:32 +0000 (22:30 +0200)]
mmc: Use menuconfig objects
Change Kconfig objects from "menu, config" into "menuconfig" so
that the user can disable the whole feature without having to
enter the menu first.
Signed-off-by: Jan Engelhardt <jengelh@gmx.de>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
Alex Dubov [Wed, 2 May 2007 03:14:55 +0000 (20:14 -0700)]
disable socket power in adapter driver instead of media one
Socket power must be fully controlled by adapter driver. This also prevents
unnecessary power-off of the socket when media driver is unloaded, yet
media remains in the socket.
Signed-off-by: Alex Dubov <oakad@yahoo.com>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
Linus Torvalds [Tue, 8 May 2007 19:07:28 +0000 (12:07 -0700)]
Merge branch 'hwmon-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6
* 'hwmon-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6: (32 commits)
Use menuconfig objects - hwmon
hwmon/smsc47b397: Use dynamic sysfs callbacks
hwmon/smsc47b397: Convert to a platform driver
hwmon/w83781d: Deprecate W83627HF support
hwmon/w83781d: Use dynamic sysfs callbacks
hwmon/w83781d: Be less i2c_client-centric
hwmon/w83781d: Clean up conversion macros
hwmon/w83781d: No longer use i2c-isa
hwmon/ams: Do not print error on systems without apple motion sensor
hwmon/ams: Fix I2C read retry logic
hwmon: New AD7416, AD7417 and AD7418 driver
hwmon/coretemp: Add documentation
hwmon: New coretemp driver
i386: Use functions from library in msr driver
i386: Add safe variants of rdmsr_on_cpu and wrmsr_on_cpu
hwmon/lm75: Use dynamic sysfs callbacks
hwmon/lm78: Use dynamic sysfs callbacks
hwmon/lm78: Be less i2c_client-centric
hwmon/lm78: No longer use i2c-isa
hwmon: New max6650 driver
...
Geert Uytterhoeven [Tue, 8 May 2007 09:37:26 +0000 (11:37 +0200)]
Fix sunrpc warning noise
Commit
c5a4dd8b7c15927a8fbff83171b57cad675a79b9 introduced the following
compiler warnings:
net/sunrpc/sched.c:766: warning: format '%u' expects type 'unsigned int', but argument 3 has type 'size_t'
net/sunrpc/sched.c:785: warning: format '%u' expects type 'unsigned int', but argument 2 has type 'size_t'
- Use %zu to format size_t
- Kill 2 useless casts
Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Tue, 8 May 2007 18:59:33 +0000 (11:59 -0700)]
Merge git://oss.sgi.com:8090/xfs/xfs-2.6
* git://oss.sgi.com:8090/xfs/xfs-2.6:
[XFS] Add lockdep support for XFS
[XFS] Fix race in xfs_write() b/w dmapi callout and direct I/O checks.
[XFS] Get rid of redundant "required" in msg.
[XFS] Export via a function xfs_buftarg_list for use by kdb/xfsidbg.
[XFS] Remove unused ilen variable and references.
[XFS] Fix to prevent the notorious 'NULL files' problem after a crash.
[XFS] Fix race condition in xfs_write().
[XFS] Fix uquota and oquota enforcement problems.
[XFS] propogate return codes from flush routines
[XFS] Fix quotaon syscall failures for group enforcement requests.
[XFS] Invalidate quotacheck when mounting without a quota type.
[XFS] reducing the number of random number functions.
[XFS] remove more misc. unused args
[XFS] the "aendp" arg to xfs_dir2_data_freescan is always NULL, remove it.
[XFS] The last argument "lsn" of xfs_trans_commit() is always called with
Linus Torvalds [Tue, 8 May 2007 18:58:20 +0000 (11:58 -0700)]
Merge branch 'reset-seq' of /linux/kernel/git/jgarzik/libata-dev
* 'reset-seq' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev:
[libata reset-seq] build and merge fixes
libata: reimplement reset sequencing
libata: improve ata_std_prereset()
libata: improve 0xff status handling
libata: add deadline support to prereset and reset methods
Linus Torvalds [Tue, 8 May 2007 18:57:17 +0000 (11:57 -0700)]
Merge branch 'upstream-linus' of /linux/kernel/git/jgarzik/netdev-2.6
* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: (40 commits)
[netdrvr] atl1: fix build
pasemi_mac: Use local-mac-address instead of mac-address if available
pasemi_mac: PHY support
pasemi_mac: Add msglevel support and "debug" module param
pasemi_mac: Logic cleanup / rx performance improvements
pasemi_mac: Minor cleanup / define fixes
pasemi_mac: Add SKB reuse / copy-break
pasemi_mac: Timer and interrupt fixes
pasemi_mac: Abstract and fix up interrupt restart routines
pasemi_mac: Move the IRQ mapping from the PCI layer to the driver
tc35815: Remove unnecessary skb->dev assignment
drivers/net/dm9000: Convert to generic boolean
AT91RM9200 Ethernet: Fix multicast addressing
AT91RM9200 Ethernet: Support additional PHYs
PCMCIA-NETDEV : xirc2ps_cs: bugfix of multicast code
sky2: re-enable
88E8056 for most motherboards
MIPS: Drop unnecessary CONFIG_ISA from RBTX49XX
ne: MIPS: Use platform_driver for ne on RBTX49XX
ne: Add NEEDS_PORTLIST to control ISA auto-probe
ne: Misc fixes for platform driver.
...
Fix conflict in drivers/net/pasemi_mac.c (get_property() got renamed to
of_get_property()) manually.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Tue, 8 May 2007 18:52:35 +0000 (11:52 -0700)]
Merge branch 'drm-patches' of /linux/kernel/git/airlied/drm-2.6
* 'drm-patches' of master.kernel.org:/pub/scm/linux/kernel/git/airlied/drm-2.6:
via: Make sure we flush write-combining using a follow-up read.
via: Try to improve command-buffer chaining.
drm: remove old taskqueue remnant
drm: rename badly named define and cleanup ioctl code spacing
radeon: Don't mess up page flipping when a file descriptor is closed.
drm/radeon: upgrade to 1.27 - make PCI GART more flexible
Linus Torvalds [Tue, 8 May 2007 18:51:43 +0000 (11:51 -0700)]
Merge /pub/scm/linux/kernel/git/dtor/input
* master.kernel.org:/pub/scm/linux/kernel/git/dtor/input:
Input: move USB miscellaneous devices under drivers/input/misc
Input: move USB mice under drivers/input/mouse
Input: move USB gamepads under drivers/input/joystick
Input: move USB touchscreens under drivers/input/touchscreen
Input: move USB tablets under drivers/input/tablet
Input: i8042 - fix AUX port detection with some chips
Input: aaed2000_kbd - convert to use polldev library
Input: drivers/usb/input - usb_buffer_free() cleanup
Input: synaptics - don't complain about failed resets
Input: pull input.h into uinpit.h
Input: drivers/usb/input - fix sparse warnings (signedness)
Input: evdev - fix some sparse warnings (signedness, shadowing)
Input: drivers/joystick - fix various sparse warnings
Input: force feedback - make sure effect is present before playing
Linus Torvalds [Tue, 8 May 2007 18:50:19 +0000 (11:50 -0700)]
Merge branch 'master' of git://git./linux/kernel/git/paulus/powerpc
* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (77 commits)
[POWERPC] Abolish powerpc_flash_init()
[POWERPC] Early serial debug support for PPC44x
[POWERPC] Support for the Ebony 440GP reference board in arch/powerpc
[POWERPC] Add device tree for Ebony
[POWERPC] Add powerpc/platforms/44x, disable platforms/4xx for now
[POWERPC] MPIC U3/U4 MSI backend
[POWERPC] MPIC MSI allocator
[POWERPC] Enable MSI mappings for MPIC
[POWERPC] Tell Phyp we support MSI
[POWERPC] RTAS MSI implementation
[POWERPC] PowerPC MSI infrastructure
[POWERPC] Rip out the existing powerpc msi stubs
[POWERPC] Remove use of 4level-fixup.h for ppc32
[POWERPC] Add powerpc PCI-E reset API implementation
[POWERPC] Holly bootwrapper
[POWERPC] Holly DTS
[POWERPC] Holly defconfig
[POWERPC] Add support for 750CL Holly board
[POWERPC] Generalize tsi108 PCI setup
[POWERPC] Generalize tsi108 PHY types
...
Fixed conflict in include/asm-powerpc/kdebug.h manually
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Roland McGrath [Tue, 8 May 2007 18:19:38 +0000 (11:19 -0700)]
Remove unused variable in get_unmapped_area
Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Tue, 8 May 2007 18:34:52 +0000 (11:34 -0700)]
Merge branch 'for-2.6.22' of git://git.kernel.dk/data/git/linux-2.6-block
* 'for-2.6.22' of git://git.kernel.dk/data/git/linux-2.6-block:
[PATCH] ll_rw_blk: fix missing bounce in blk_rq_map_kern()
[PATCH] splice: always call into page_cache_readahead()
[PATCH] splice(): fix interaction with readahead
Linus Torvalds [Tue, 8 May 2007 18:32:30 +0000 (11:32 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/shaggy/jfs-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/shaggy/jfs-2.6:
JFS: Fix race waking up jfsIO kernel thread
JFS: use __set_current_state()
Copy i_flags to jfs inode flags on write
JFS: document uid, gid, and umask mount options in jfs.txt
Andrew Morton [Tue, 8 May 2007 07:40:22 +0000 (00:40 -0700)]
sm501fb printk warning fixes
drivers/video/sm501fb.c: In function 'sm501fb_cursor':
drivers/video/sm501fb.c:992: warning: format '%08x' expects type 'unsigned int', but argument 3 has type 'long unsigned int'
drivers/video/sm501fb.c:992: warning: format '%08x' expects type 'unsigned int', but argument 4 has type 'long unsigned int'
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Andrei Konovalov [Tue, 8 May 2007 07:40:18 +0000 (00:40 -0700)]
xilinxfb: xilinx framebuffer device driver
Add support for the video controller IP block included into Xilinx ML300 and
ML403 reference designs.
Signed-off-by: Andrei Konovalov <akonovalov@ru.mvista.com>
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Krzysztof Helt [Tue, 8 May 2007 07:40:16 +0000 (00:40 -0700)]
pm2fb: fix of jumps in pm2fb_probe
This patch fixes incorrect targets of jumps when an error occurs in the
pm2fb_probe.
Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Krzysztof Helt [Tue, 8 May 2007 07:40:14 +0000 (00:40 -0700)]
skeletonfb: improvements
This patch adds a macro to register PCI ids table and corrects type of
xxxfb_fix variable to avoid modpost warnings.
Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Krzysztof Helt [Tue, 8 May 2007 07:40:12 +0000 (00:40 -0700)]
pm2fb: removal of pm2fb_par fields
This patch removes two redundant fields in the pm2fb_par structure.
Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Krzysztof Helt [Tue, 8 May 2007 07:40:10 +0000 (00:40 -0700)]
skeletonfb: more corrections
More corrections to skeletonfb.c file:
- fixed types of more arguments
- removed returned values in void functions
- removed not existing fb_poll function
- fixed closing comment typo
- corrected misleading constant name ADDR
Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Acked-By: James Simmons <jsimmons@infradead.org>
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Antonino A. Daplas [Tue, 8 May 2007 07:40:08 +0000 (00:40 -0700)]
vga16fb: actually support widths in multiples of 8
vga16fb does not just support 8-pixel wide rectangles, but rectangles with
widths in multiples of 8.
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Antonino A. Daplas [Tue, 8 May 2007 07:40:06 +0000 (00:40 -0700)]
vgacon: disallow console operations when in KD_GRAPHICS mode
Reported by James Pearson as:
boot to run level 3
if not root, then make sure /dev/console is writeable
login and type:
setterm -blank 0
start X
type into an xterm:
while true; do echo "" > /dev/console; usleep 100000; done
while the above loop is running switch to the text console and back
again (Ctrl-Alt-F1 then Ctrl-Alt-F7)
... and the screen will be shifting (and wrapping) to the left.
This problem stems from continuously writing text to the system console (which
is in KD_TEXT mode) while the foreground console is in KD_GRAPHICS
mode. Somewhere along the way, console printing got confused and omitted the
KD_GRAPHICS/KD_TEXT test. Thus, vgacon attempted to scroll the screen of X,
which causes X to shift.
Fix by disallowing vgacon to touch the hardware when the vc is in KD_GRAPHICS
mode. A definitive fix entails a full audit of the console code.
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jan Engelhardt [Tue, 8 May 2007 07:40:04 +0000 (00:40 -0700)]
Use menuconfig objects II: video/logo
Change Kconfig objects from "menu, config" into "menuconfig" so that the user
can disable the whole feature without having to enter the menu first.
Signed-off-by: Jan Engelhardt <jengelh@gmx.de>
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Krzysztof Helt [Tue, 8 May 2007 07:40:02 +0000 (00:40 -0700)]
pm2fb: accelerated fillrect and copyarea
This is a port of accelerated functions from 2.4 kernel. Only fillrect and
copyarea are accelerated. Fillrect is not accelerated in 24-bit mode.
[adaplas]
Add appropriate flags
Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Ondrej Zajicek [Tue, 8 May 2007 07:40:00 +0000 (00:40 -0700)]
s3fb: updates
Move s3fb_get_tilemax to svgalib.c as svga_get_tilemax, because it reports
limitation of other code from svgalib (svga_settile, svga_tilecopy, ...)
Limit font width to 8 pixels in 4 bpp mode.
Signed-off-by: Ondrej Zajicek <santiago@crfreenet.org>
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Krzysztof Helt [Tue, 8 May 2007 07:39:57 +0000 (00:39 -0700)]
pm2fb: memclock setting corrections
This patch disables a memory clock setting if a board has been initialized by
BIOS. This allows using the memory clock set by manufacturer of the board.
This patch also sets default clock for 3dlabs Permedia 2V reference board's
clock to 75MHz (BIOS setting for EONtronic Permedia 2Vboard), because the
default 83MHz can be too high.
Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
krzysztof.h1@wp.pl [Tue, 8 May 2007 07:39:56 +0000 (00:39 -0700)]
pm2fb: reset transparency settings
This patch resets transparency settings when depth changes. Otherwise the 16
and 24-bit modes work incorrectly after switching from 32-bit mode.
Signed-off-by: Krzysztof Helt < krzysztof.h1@wp.pl>
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Antonino A. Daplas [Tue, 8 May 2007 07:39:54 +0000 (00:39 -0700)]
fbcon: check console-fb mapping in fbcon_get_requirement
- Check the console-to-fb mapping in fbcon_get_requirement(), otherwise the
value returned may not be valid for the driver.
- Minor cleanup
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Antonino A. Daplas [Tue, 8 May 2007 07:39:52 +0000 (00:39 -0700)]
fbdev: clean up exit patch of fb_set_var
Clean up exit patch of fb_set_var():
- consolidate all return values into a single local variable
- ensure that return values are valid error codes
- fix fb_set_var() returning success when fb_check_caps() failed
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Adrian Bunk [Tue, 8 May 2007 07:39:50 +0000 (00:39 -0700)]
drivers/video/sis/: remove more kernel 2.4 code
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Cc: Thomas Winischhofer <thomas@winischhofer.net>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Matthias Kaehlcke [Tue, 8 May 2007 07:39:49 +0000 (00:39 -0700)]
use mutex instead of semaphore in virtual console driver
The virtual console driver uses a semaphore as mutex. Use the mutex API
instead of the (binary) semaphore.
Signed-off-by: Matthias Kaehlcke <matthias.kaehlcke@gmail.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Ville Syrjala [Tue, 8 May 2007 07:39:47 +0000 (00:39 -0700)]
atyfb: halve XCLK with Mobility and 32bit memory
Laptops with Rage Mobility and 32bit memory interface seem to require halved
XCLK to operate correctly.
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Ville Syrjala [Tue, 8 May 2007 07:39:45 +0000 (00:39 -0700)]
atyfb: reorganize clock init
Reorganize atyfb clock init code so command line clock overrides are effective
for all chips. The old code would silently ignore some of the command line
clock overrides with some chips.
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Ville Syrjala [Tue, 8 May 2007 07:39:44 +0000 (00:39 -0700)]
atyfb: increase SPLL delay
Wait 5 ms instead of 500 us for the SPLL to lock. This matches the
recommendation in mach64 programmer's guide.
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Antonino A. Daplas [Tue, 8 May 2007 07:39:42 +0000 (00:39 -0700)]
nvidiafb: fix return value of nvidiafb_open()
Fix return value of nvidiafb_open().
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Ondrej Zajicek [Tue, 8 May 2007 07:39:41 +0000 (00:39 -0700)]
vga: vgastate fix
1) sets 'palette access disabled' during read from AR10.
This is usually documented as needed for access AR01-AR0F,
but on ARK Logic card it is needed for AR10 (otherwise read
returns some nonsence and save_vga_text() returns before do
anything).
2) do not restore AR10, because it was not changed during
3) remove modification of misc reg:
/* force graphics mode */
vga_w(state->vgabase, VGA_MIS_W, misc | 1);
as comment is misleading - LSB of misc reg does not set/reset graphics
mode, but set color/mono adresses of CRT and some other regs.
but these regs are not used during save/restore fonts.
(it worked even when (misc | 1) was replaced by (misc & ~1) ).
Signed-off-by: Ondrej Zajicek <santiago@crfreenet.org>
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Antonino A. Daplas [Tue, 8 May 2007 07:39:39 +0000 (00:39 -0700)]
s3fb: implement fb_get_caps
Implement fb_get_caps(). This will allow the driver to tell upper layer that
it can only support 256 8x16 bitmaps when in tileblitting mode
(var->bits_per_pixel == 0);
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Antonino A. Daplas [Tue, 8 May 2007 07:39:37 +0000 (00:39 -0700)]
fbdev: fbcon: check if mode can handle new screen
Check if the mode can properly display the screen. This will be needed by
drivers where the capability is not constant with each mode. The function
fb_set_var() will query fbcon the requirement, then it will query the driver
(via a new hook fb_get_caps()) its capability. If the driver's capability
cannot handle fbcon's requirement, then fb_set_var() will fail.
For example, if a particular driver supports 2 modes where:
mode1 = can only display 8x16 bitmaps
mode2 = can display any bitmap
then if current mode = mode2 and current font = 12x22
fbset <mode1> /* mode1 cannot handle 12x22 */
fbset will fail
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Dave Jones [Tue, 8 May 2007 07:39:35 +0000 (00:39 -0700)]
nvidiafb: prevent triggering of softlockup
If the chip locks up, we get into a long polling loop,
where the softlockup detector kicks in.
See https://bugzilla.redhat.com/bugzilla/attachment.cgi?id=151878
for an example.
[adaplas]
Chip lockup can occur at 3 points (flush, sync, and wait). Consolidate and
allow the driver to go to safe mode cleanly.
Signed-off-by: Dave Jones <davej@redhat.com>
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Krzysztof Helt [Tue, 8 May 2007 07:39:33 +0000 (00:39 -0700)]
pm2fb: pixclock setting restriction
This patch adds restrictions to calculations of m, n and p factors
which sets the pixclock for the Permedia 2V. I found during tests
that synchronization is unstable if m (divisor) is bigger than
half of the n (numerator). The patch disallows such settings
combination.
Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Krzysztof Helt [Tue, 8 May 2007 07:39:32 +0000 (00:39 -0700)]
pm2fb: Permedia 2V memory clock setting
Permedia 2V uses its own registers to set a memory clock. The
patch adds these registers and uses them in the set_memclock()
function.
Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Krzysztof Helt [Tue, 8 May 2007 07:39:30 +0000 (00:39 -0700)]
pm2fb: 3dlabs Permedia 2V reference board added
This patch adds support for 3dlabs Permedia reference board.
Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Alan Cox [Tue, 8 May 2007 07:39:28 +0000 (00:39 -0700)]
nvidiafb/rivafb: switch to pci_get refcounting
Switch to pci_get refcounting APIs
[adaplas]
Fix a long-standing bug where the return value of
pci_find_slot()/pci_get_bus_and_slot() is ignored.
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Alan Hourihane [Tue, 8 May 2007 07:39:25 +0000 (00:39 -0700)]
vmlfb: framebuffer driver for Intel Vermilion Range
Add the Intel Vermilion Range framebuffer support.
Signed-off-by: Alan Hourihane <alanh@tungstengraphics.com>
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Ondrej Zajicek [Tue, 8 May 2007 07:39:24 +0000 (00:39 -0700)]
s3fb: driver fixes
This fixes broken fbcon on Virge VX in 24 bpp mode, and contains several
other small updates.
Signed-off-by: Ondrej Zajicek <santiago@crfreenet.org>
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Antonino A. Daplas [Tue, 8 May 2007 07:39:22 +0000 (00:39 -0700)]
fbdev: save the activate field before calling fb_check_var()
Some drivers may reset the var->activate field on fb_check_var(). This can
lead to undefined behavior. For example, doing fbset -a <option> with vga16fb
will only modify the active console instead of modifying all.
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Antonino A. Daplas [Tue, 8 May 2007 07:39:19 +0000 (00:39 -0700)]
fbcon: check if the character count can be handled
Fontmaps can be 256 or 512 in length. The only driver that can do tileblitting
can only handle 256 characters. Check for this when setting the font.
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Antonino A. Daplas [Tue, 8 May 2007 07:39:17 +0000 (00:39 -0700)]
s3fb: implement fb_get_tilemax()
Implement fb_get_tilemax(). It just returns 256.
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Antonino A. Daplas [Tue, 8 May 2007 07:39:16 +0000 (00:39 -0700)]
fbdev: add tile operation to get the maximum length of the map
Add a tile method, fb_get_tilemax(), that returns the maximum length of
the tile map (or font map). This is needed by s3fb which can only handle
256 characters.
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Antonino A. Daplas [Tue, 8 May 2007 07:39:14 +0000 (00:39 -0700)]
s3fb: limit 8x16 rectangles when tileblitting is enabled
If tileblitting is enabled (text mode), the hardware can only accept 8x16
bitmaps. Advertise this to the upper layer. And to ensure that an appropriate
font is always available, select an 8x16 font in Kconfig.
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Antonino A. Daplas [Tue, 8 May 2007 07:39:12 +0000 (00:39 -0700)]
vga16fb: restrict to blit rectangles with widths of multiples of 8 pixels
Advertise that vga16fb can only handle widths that are 8-pixel-multiple only
(software limitation). To ensure that a legal font is available, SELECT an
8x16 font in Kconfig.
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Antonino A. Daplas [Tue, 8 May 2007 07:39:11 +0000 (00:39 -0700)]
fbcon: font setting should check limitation of driver
fbcon_set_font() will now check if the new font dimensions can be drawn by the
driver (by checking pixmap.blit_x and blit_y). Similarly, add 2 new
parameters to get_default_font(), font_w and font_h, to further aid in the
font selection process.
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Antonino A. Daplas [Tue, 8 May 2007 07:39:09 +0000 (00:39 -0700)]
fbdev: advertise limitation of drawing engine
A few drivers are not capable of blitting rectangles of any dimension.
vga16fb can only blit 8-pixel wide rectangles, while s3fb (in tileblitting
mode) can only blit 8x16 rectangles. For example, loading a 12x22 font in
vga16fb will result in a corrupt display.
Advertise this limitation/capability in info->pixmap.blit_x and blit_y. These
fields are 32-bit arrays (font max is 32x32 only), ie, if bit 7 is set, then
width/height of 7+1 is supported.
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Antonino A. Daplas [Tue, 8 May 2007 07:39:08 +0000 (00:39 -0700)]
fbdev: consolidate common drawing functions into a header file
Consolidate common drawing functions into a single header file.
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Antonino A. Daplas [Tue, 8 May 2007 07:39:07 +0000 (00:39 -0700)]
vfb: use fb_sys_read() and fb_sys_write()
Since vfb's framebuffer is vmalloc'ed, use the fb_sys_read() and
fb_sys_write().
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Antonino A. Daplas [Tue, 8 May 2007 07:39:06 +0000 (00:39 -0700)]
hecubafb: use fb_sys_read()
Since hecubafb's framebuffer is vmalloc'ed, use fb_sys_read().
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
projects / powerpc.git / log