X-Git-Url: http://git.rot13.org/?p=trilby-hat-fpga;a=blobdiff_plain;f=trilby.lpf;h=6c14b21381fc0db0257e623b7be618889ef942e6;hp=edbb24fa03c2a85f2820cbb08e76a8f75e8c8c1b;hb=f4e9affa08efc13dc8cf2fe3a67a8ca7400903e0;hpb=c73ee8215134d6c4eaab670993c0f9e4155d98b3

diff --git a/trilby.lpf b/trilby.lpf
index edbb24f..6c14b21 100644
--- a/trilby.lpf
+++ b/trilby.lpf
@@ -10,21 +10,36 @@
 LOCATE  COMP  "AGC_A"  SITE  "E8"; # out
 
 LOCATE  COMP  "clk"  SITE  "U16"; # CLK 24Mhz TCXO
-IOBUF PORT "clk" PULLMODE=NONE IO_TYPE=LVCMOS25; # ? 33?
+IOBUF PORT "clk" PULLMODE=NONE IO_TYPE=LVCMOS33; # ? 33?
 FREQUENCY PORT "clk" 24 MHZ;
 
-LOCATE  COMP  "a2dq10"  SITE  "C17"; # in
-LOCATE  COMP  "a2dq11"  SITE  "A18";
-LOCATE  COMP  "a2dq12"  SITE  "A19";
-LOCATE  COMP  "a2dq13"  SITE  "B19";
-LOCATE  COMP  "a2dq2"  SITE  "B12";
-LOCATE  COMP  "a2dq3"  SITE  "D15";
-LOCATE  COMP  "a2dq4"  SITE  "C15";
-LOCATE  COMP  "a2dq5"  SITE  "B15";
-LOCATE  COMP  "a2dq6"  SITE  "E15";
-LOCATE  COMP  "a2dq7"  SITE  "C16";
-LOCATE  COMP  "a2dq8"  SITE  "D16";
-LOCATE  COMP  "a2dq9"  SITE  "B17";
+
+# LTC2226CUH - in
+# 12bit, 25Msps, 3V ADC
+# clk - 24mhz tcxo
+#
+# schematics implies that ADC has 14 bits, it has only 12
+# my guess it that previous version had 14 bit ADC, so
+# a2dq0 and a2dq1 are not used in original vhdl
+
+LOCATE  COMP  "a2dq0"   SITE  "D12"; # -- not used in hdl (12-bit ADC), from schematic
+LOCATE  COMP  "a2dq1"   SITE  "C12"; # -- not used
+LOCATE  COMP  "a2dq2"   SITE  "B12"; # D0
+LOCATE  COMP  "a2dq3"   SITE  "D15"; # D1
+LOCATE  COMP  "a2dq4"   SITE  "C15"; # D2
+LOCATE  COMP  "a2dq5"   SITE  "B15"; # D3
+LOCATE  COMP  "a2dq6"   SITE  "E15"; # D4
+LOCATE  COMP  "a2dq7"   SITE  "C16"; # D5
+LOCATE  COMP  "a2dq8"   SITE  "D16"; # D6
+LOCATE  COMP  "a2dq9"   SITE  "B17"; # D7
+LOCATE  COMP  "a2dq10"  SITE  "C17"; # D8
+LOCATE  COMP  "a2dq11"  SITE  "A18"; # D9
+LOCATE  COMP  "a2dq12"  SITE  "A19"; # D10
+LOCATE  COMP  "a2dq13"  SITE  "B19"; # D11 MSB
+
+LOCATE  COMP  "a2d_of"  SITE  "B20"; # over/under flow
+
+
 
 LOCATE  COMP  "audio_l"  SITE  "H20"; # out
 LOCATE  COMP  "audio_r"  SITE  "K18"; # out
@@ -54,18 +69,21 @@ LOCATE  COMP  "exp_pin_21"  SITE  "D14";
 LOCATE  COMP  "res_in"  SITE  "E14"; # in
 # pins 23,24 are GND
 
+
+# order like on PCB, D7, D5, D6, D8
 LOCATE  COMP  "green_led_d7"  SITE  "G16";
-LOCATE  COMP  "orange_led_d8" SITE  "H16";
 LOCATE  COMP  "red_led_d5"    SITE  "E18";
 LOCATE  COMP  "yellow_led_d6" SITE  "F18";
+LOCATE  COMP  "orange_led_d8" SITE  "H16";
+
+IOBUF PORT "green_led_d7"  IO_TYPE=LVCMOS33;
+IOBUF PORT "orange_led_d8" IO_TYPE=LVCMOS33;
+IOBUF PORT "red_led_d5"    IO_TYPE=LVCMOS33;
+IOBUF PORT "yellow_led_d6" IO_TYPE=LVCMOS33;
 
-IOVUF PORT "green_led_d7"  IO_TYPE=LVCMOS25;
-IOVUF PORT "orange_led_d8" IO_TYPE=LVCMOS25;
-IOVUF PORT "red_led_d5"    IO_TYPE=LVCMOS25;
-IOVUF PORT "yellow_led_d6" IO_TYPE=LVCMOS25;
 
 LOCATE  COMP  "mhz_16"  SITE  "L20"; # out
-LOCATE  COMP  "mhz_96"  SITE  "L17"; # out
+LOCATE  COMP  "mhz_96"  SITE  "L17"; # out - ADE-1 frequency mixer LO
 
 
 # reaspberry pi header
@@ -110,16 +128,42 @@ LOCATE  COMP  "rpi_pin_38"  SITE  "C2"; # pin 38: gpio20
 # pin 39: GND
 LOCATE  COMP  "rpi_pin_40"  SITE  "B2"; # pin 40: gpio21
 
-
-LOCATE  COMP  "tuner_hf"  SITE  "D8";
+IOBUF PORT "rtc_sda"     IO_TYPE=LVCMOS33;
+IOBUF PORT "rtc_scl"     IO_TYPE=LVCMOS33;
+IOBUF PORT "rtc_mfp"     IO_TYPE=LVCMOS33;
+IOBUF PORT "uart_rx"     IO_TYPE=LVCMOS33;
+IOBUF PORT "uart_tx"     IO_TYPE=LVCMOS33;
+IOBUF PORT "rpi_pin_11"  IO_TYPE=LVCMOS33;
+IOBUF PORT "rpi_pin_12"  IO_TYPE=LVCMOS33;
+IOBUF PORT "spi_mosi"    IO_TYPE=LVCMOS33;
+IOBUF PORT "spi_miso"    IO_TYPE=LVCMOS33;
+IOBUF PORT "rpi_pin_22"  IO_TYPE=LVCMOS33;
+IOBUF PORT "spi_sclk"    IO_TYPE=LVCMOS33;
+IOBUF PORT "spi_cs0"     IO_TYPE=LVCMOS33;
+IOBUF PORT "spi_cs1"     IO_TYPE=LVCMOS33;
+IOBUF PORT "rpi_pin_29"  IO_TYPE=LVCMOS33;
+IOBUF PORT "rpi_pin_31"  IO_TYPE=LVCMOS33;
+IOBUF PORT "rpi_pin_32"  IO_TYPE=LVCMOS33;
+IOBUF PORT "rpi_pin_33"  IO_TYPE=LVCMOS33;
+IOBUF PORT "rpi_pin_35"  IO_TYPE=LVCMOS33;
+IOBUF PORT "rpi_pin_36"  IO_TYPE=LVCMOS33;
+IOBUF PORT "rpi_pin_37"  IO_TYPE=LVCMOS33;
+IOBUF PORT "rpi_pin_38"  IO_TYPE=LVCMOS33;
+IOBUF PORT "rpi_pin_40"  IO_TYPE=LVCMOS33;
+
+
+LOCATE  COMP  "tuner_hf"   SITE  "D8"; # ADG918 switch lf/hf
 LOCATE  COMP  "tuner_scl"  SITE  "C6";
 LOCATE  COMP  "tuner_sda"  SITE  "C7";
 
+IOBUF PORT "tuner_hf"   IO_TYPE=LVCMOS33;
+IOBUF PORT "tuner_scl"  IO_TYPE=LVCMOS33;
+IOBUF PORT "tuner_sda"  IO_TYPE=LVCMOS33;
 
 LOCATE  COMP  "unused"  SITE  "B11";
 
 #PLL
-LOCATE  COMP  "I518/pll_24_to_96_inst/PLLInst_0"  SITE  "PLL_BR0" ;
+#LOCATE  COMP  "I518/pll_24_to_96_inst/PLLInst_0"  SITE  "PLL_BR0" ;
 
 #FREQUENCY NET "N_355" 16.000000 MHz ;
 #FREQUENCY NET "clkfast" 96.000000 MHz ;